Sebastian Mlynarski's Activities

Setting up a room under a roof

Sebastian Mlynarski — Tue, 30 Mar 2021 11:28:13 GMT

Hi,

Bit of a tricky situation. I have been trying to model a small server room in an existing loft space. (quick revit model attached to show the plan with roof removed).

I am having some issues when setting up the roof level. I have modelled the room as 0.5m, as that will be the lowest wall height and elevated the edge accordingly by 0.6m. However, when checking the 3D drawing in Hevacomp I seem to get walls which extend way past my highest point of the room. Is this just a graphical issue or something I've done wrong? Happy to link the model for you to have a look at.

Also on a separate note: when setting up the roof and filling in vertical sections - do they assume the material of the wall beneath them, or do they assume the material of the roof?

Many thanks and best regards

Seb

Error when running 'size duct' in Netsys

Sebastian Mlynarski — Tue, 16 Jun 2020 13:32:34 GMT

Hi,

I am getting an error when I try to size the system in Netsys Ductsizer.

After drawing the system I am met with 'Duct with system marker is not the start duct for the system'. (See attached)

I have tried putting the system marker in various locations across the duct, as well as checking that it is at the right height but to no avail.

Any help with this would be greatly appreciated :)

Many thanks,

Seb

Ask A Question I

Tue, 04 Feb 2020 01:47:28 GMT

Ask a question in a forum.

Netsys - Unable to access file -> Vectors not read in

Sebastian Mlynarski — Tue, 04 Feb 2020 11:30:36 GMT

Hi,

I'm having an issue when setting up a Netsys calculation and Importing a DXF. I get a pop-up reading 'Unable to access file' followed by 'Vectors not read in'.

This results in the DXF not being imported.

I also set up a CIBSE gain calc and managed to import a DXF without any issues.

Many thanks,

Seb