aleksander_zamorski's Activities

[MX V8i SS3] Haul mass analysis limitation

aleksander_zamorski — Tue, 13 Jan 2015 13:43:59 GMT

Hello,

I've encounter a bug or unknown to me limitation (no such info neither in "User manual" nor in "Command Language Reference"). When the number of point in haul analysis exceeds 1000 (10km with 10m step), a window appears with buggy information:

"MX Error E0097: Invalid string name specification"

Part of working input (1000 points):

HAUL,A1 QUANT,A1
070,1=MC10, ,3=VM00,4=10,5=426500,8=436490
071, ,2=VOLU, ,5=426500,8=436500
071
072,1=MC10,2=VM00,3=VH00, ,5=426500,8=436490
075
999

Part of not working input (1001 points)

HAUL,A1 QUANT,A1
070,1=MC10, ,3=VM00,4=10,5=426500,8=436500
071, ,2=VOLU, ,5=426500,8=436500
071
072,1=MC10,2=VM00,3=VH00, ,5=426500,8=436500
075
999

Is it right or something is wrong? I haven't used is before - spreadsheet did it ;)

Best regards
Aleksander Zamorski

[MX SS4 W10] CAD data import issue

aleksander_zamorski — Fri, 30 Sep 2016 10:02:04 GMT

Hello,

I've just got a new workstation with Windows 10 and MX SS4. While trying to import CAD data from master DGN into MX model I've encountered an issue with this tool. The import wizard isn't appearing (after confirming a warning dialog concerning a possible modification of drawing content) but it seems to be working somehow/somewhere (other commands in menus are faded as inactive just like in the moment when an other command is in progress). I've also checked it on another W10/SS4 units and the problem with this tool is shared.

Does anyone know the solution or I need to open a service ticket?

Best regards
Aleksander Zamorski

[MX V8i SS3] Associated string in Vertical Design

aleksander_zamorski — Wed, 04 Feb 2015 06:59:51 GMT

Hello,

I wonder if there is any smarter solution than my to show associated string during vertical design of master string (alignment)? Right now I'm creating a temporary TRIA model below master string representing such string and adding it as an addition ground model. Maybe it could be some kind of an enhancement request if there is no other way? :)

Best regards
Aleksander Zamorski

Discussion Starter I

Wed, 05 Sep 2018 04:41:07 GMT

Start a discussion in a forum that receives 5 replies.

[MX SS4] Windows 10 problem on exit

aleksander_zamorski — Mon, 15 Feb 2016 14:51:10 GMT

Hello,

I was appointed to check compatibility of a new MX SS4 8.11.09.845 with a new Windows 10 before changing workstations in whole company.
At first everything was all right but after choosing "Close Project" option MX crashed and started countdown for sending crash log.
I have tried many times after full reboot of the system and on brand new and uprgaded projects (model.fill and *.mmd) and nothing changed.
Every time on exit MX crashes - in attachment exception.log file.

Is there maybe any patch or any special requirements for user system rights?

Best regards
Aleksander Zamorski

communities.bentley.com/.../7367.exception.log

[MX SS4 linemode] Interface problem

aleksander_zamorski — Wed, 14 Jun 2017 08:34:21 GMT

Hello,

I've encountered a problem while writing input for ditch (multistrata) analysed by sections.

General setting-up for ditch is a dependence of height difference between shoulder (ES10) and ditch bottom (section N)
There are three sections: "T" - terrain, "N" - ditch bottom, "W" - auxiliary section representing ditch bottom levelled up by 0.3 [m]

When level difference of section N and shoulder is less then 2.0 [m] (cut/low fill) goes record 261 else goes record 262 (fill).

The problem is when in cut the ditch bottom is lower then 2.0 [m] from shoulder (need of place a culvert).
There should go record 262 because the level difference between ES10 and section N is more then 2.0 [m] high (1.7 from ES10 and auxiliary section W)
But there goes record 261 from second line (first IGN) and the rest of 261. Why is it so and how to write it correct (I could share models)?

Below part of my input:

INTERFAC,DROGA ROWY PP,DROGA
259,INTI

260,1=MC10,2=IW1V,3=IN1V,4=-11

261,1=W ,2=ES10,3=RP11,4=3,5= 5.1 ,7=-0.33333
261,1=IGN ,2=RP11,3=RP12,4=3,5= 1.0 ,7=-0.3
261,1=IGN ,2=RP12,3=RP13,4=3,5= 1.0 ,7=+0.3
261,1=T ,2=RP13,3=IW12,4=3,5= 2.1 ,7=+0.33333
261,1=T ,2=IW12,3=IW13,4=3,5= 2.0 ,7=+0.5
261,1=T ,2=IW13,3= ,4=3,5= ,7=+0.66667

262,1=N ,2=ES10,3=RT10,4=5,5= ,7=-0.66667
262,1=IGN ,2=RT10,3=RT11,4=5,5= 0.20 ,7=-0.0
262,1=IGN ,2=RT11,3=RT12,4=5,5= 0.20 ,7=-0.0
262,1=IGN ,2=RT12,3=IN11,4=5,5= 0.75 ,7=+0.66667
262,1=T ,2=IN11,3= ,4=5,5= ,7=+0.66667
262,1=T ,2=IN11,3=IN12,4=5,5= 1.00 ,7=+0.0
262,1=T ,2=IN12,3= ,4=5,5= ,7=-0.66667

263,DISC

999

Geometry of ditch and part of plan drawing attached below:

- record 261

- record 262:

- incorrect interface result in plan:

Best regards
Aleksander Zamorski

[MX linemode] Interface for fill/cut

aleksander_zamorski — Thu, 13 Apr 2017 07:36:46 GMT

Hello,

I can't cope with input interface function creating earthworks. I'm able to write a right fill/cut conditions but there must have a different names of strings and get awfull transitions areas without ditches (gaps). I need to make a manual corrects in such places. Is there any solution to manage such thing. Below is part of my input (sections "S" - survey, "D" - ditches levels) and dwg with drawing:

INTERFAC,S7 DITCHES PP,S7 EARTHWORKS

259,INTI
260,1=MC10,2=IA10,3=IA10,4=-11,5=38100,8=38400

261,1=D ,2=ES10,3=IP10,4=5,5= 5.1 ,7=-0.33333
261,1=IGN ,2=IP10,3=RP10,4=5,5= 0.375 ,7=-0.62222
261,1=IGN ,2=RP10,3=RD1P,4=5,5= 0.375 ,7=-0.17778
261,1=IGN ,2=RD1P,3=RP11,4=5,5= 0.375 ,7=+0.17778
261,1=IGN ,2=RP11,3=IP11,4=5,5= 0.375 ,7=+0.62222
261,1=IGN ,2=IP11,3=IW10,4=5,5= 2.1 ,7=+0.33333
261,1=S ,2=IW10,3=IW11,4=5,5= 2.0 ,7=+0.5
261,1=S ,2=IW11,3= ,4=5,5= ,7=+0.66667

262,1=D ,2=ES10,3=RT10,4=5,5= ,7=-0.66667
262,1=IGN ,2=RT10,3=RD1T,4=5,5= 0.20 ,7=-0.0
262,1=IGN ,2=RD1T,3=RT11,4=5,5= 0.20 ,7=-0.0
262,1=IGN ,2=RT11,3=IN10,4=5,5= 0.75 ,7=+0.66667
262,1=S ,2=IN10,3= ,4=5,5= ,7=+0.66667
262,1=S ,2=IN10,3=IN11,4=5,5= 1.00 ,7=+0.0
262,1=S ,2=IN11,3= ,4=5,5= ,7=-0.66667

263,NODI

Best regards
Aleksander Zamorski

communities.bentley.com/.../EARTHWORKS.dwg

[MX linemode] Intersection of string and triangulation

aleksander_zamorski — Wed, 22 Mar 2017 09:11:18 GMT

Hello,

Does anyone know the way how to analyse an intersection of string and triangulation via linemode?
My task is to report a parts of a string which are below a given triangulation string (ie. copy such parts into another model).

Best regards
Aleksander Zamorski

[MX SS4] DWG export - model as layout

aleksander_zamorski — Wed, 08 Feb 2017 14:42:36 GMT

Hello,

I moved to MX SS4 and encountered a problem with export to DWG.
While saving a cross section drawing to DWG a content is moved to AutoCAD layout instead of model.
I suppose it is connected with some settings I don't know (I don't work on MS).

Does anyone know a solution for this?

Best regards
Aleksander Zamorski

[MXROAD SECLECT] MXROAD-ADDIN

aleksander_zamorski — Mon, 28 Nov 2016 13:41:06 GMT

Hello,

Could you help me with an invoice content? What is it a "MXROAD-ADDIN" (price is almost 20% of MXROAD)?

Best regards
Aleksander Zamorski

[MX V8i SS3] Plan annotation *.pss

aleksander_zamorski — Fri, 02 Oct 2015 08:25:30 GMT

Hello,

I need to annotate in plan a geometry string on curves with such content:

preceding transition A value / preceding transition length
curve radius
following transition A value / following transition length

[ A= XXX / L=XXX ]
[ R=XXXX ]
[ A= XXX / L=XXX ]

Unfortunately I can't find solution for this in Style Set Editor :(
I haven't found fields for this in annotation list.
Does anyone have any ideas?

Best regards
Aleksander Zamorski

[MX V8i SS3] Visualisation and animation (without 3ds)

aleksander_zamorski — Wed, 16 Sep 2015 08:33:29 GMT

Hello,

I would like to start creating visualisations and animations of highways within a MX.
I found that there are tools for this in MX (in PowerDraft/Microstaion).
Could anyone help me how to start with this?

Our company could buy something like "first steps course" for this :)

Best regards
Aleksander Zamorski

[MX SS3] 3D dwg problem - strings as splines

aleksander_zamorski — Mon, 07 Sep 2015 06:23:16 GMT

Hello,

I've encountered a strange MX behavior while exporting from 3D dpw/dgn to 3D dwg. Most of strings/smartlines are correctly exported as 3D polylines but some are exported as splines. Does anyone knows which settings is responsible for this?

In attachment MX model, dpw file, 3D dgn and 3D dwg (splines are red) - communities.bentley.com/.../PLAN_5F00_3D.zip.

Best Regards
Aleksander Zamorski

[MX SS3] Annotation of an associated string in profile

aleksander_zamorski — Thu, 25 Jun 2015 11:02:20 GMT

Hello,

I need to annotate an associated string (ditch) in profile view with its level and chainage of reference string (annotation along a string - not in box).
I've tried 059, but it's annotating a cumulative length of an associated string that differs from reference chainage (screenshot below)

Does anyone know any solution for such task (of course in linemode)?

Best regards
Aleksander Zamorski

[MX V8i SS3 linemode] Box content in profile

aleksander_zamorski — Fri, 19 Jun 2015 06:33:53 GMT

Hello,

Is there any input solution for horizontal moving/offseting a box content in profile drawing?
By default the annotation (i.e level) is center-aligned to point/pip (left part of screenshot).
I need it to be offset vertically once left once right side (right part of screenshot).

I can't find right input function/field - is it generally possible? If yes - where can I find it?

Thanks for help
Regards
Aleksander Zamorski