Oleksandr Bilanovskyi

• ERROR: Weld[WELD]123xxxxxxxxGUID is not connected to Pipe

  

  Kestutis Mitkus

  Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.09.XXX (SS5) | 08.11.11.XX (SS6) Environment: Windows 7/8.1/10 (64 bit) Area: Settings/Attributes Subarea: Isometrics Generation Original…

  • over 5 years ago
  • OpenPlant | AutoPLANT
  • OpenPlant | AutoPLANT Wiki

• Errors, Logs, Messages, Crashes - OpenPlant Isometrics Manager

  

  Kestutis Mitkus

  Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.09.XXX & Others Environment: Windows 7 (64 bit) Area: - Subarea: - Original Author: Bentley Product Advantage Group Isometrics…

  • over 4 years ago
  • OpenPlant | AutoPLANT
  • OpenPlant | AutoPLANT Wiki

• How to add insulation on complete pipe after it was placed?

  

  Berrie Geboers

  How to add insulation on complete pipe after it was placed? Open Project Admin. Go to Project à Piping à Update. Select in left column the field INSTHICK and if needed INSULATION (For the insulation spec) and click on the ADD button. …

  • over 6 years ago
  • OpenPlant | AutoPLANT
  • OpenPlant | AutoPLANT Wiki

• How to Add NEW Schema Field to Component for Custom Tagging in OpenPlant Isometrics Manager

  

  Kestutis Mitkus

  Applies To Product(s): OpenPlant Modeler / OpenPlant Isometrics Manager Version(s): 08.11.09.XXX Environment: Windows 7 (64 bit) Area: Class Editor / Isometric Configuration Subarea…

  • over 4 years ago
  • OpenPlant | AutoPLANT
  • OpenPlant | AutoPLANT Wiki

• How to Avoid Note Box Overlap with Inside Text

  

  Swapnil Joshi

  Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.09.XXX (SS5) | 08.11.11.XXX (SS6) Environment: Windows 7/8.1/10 (64 bit) Area Settings/Attributes Subarea: Modifying Text and Annotation …

  • over 4 years ago
  • OpenPlant | AutoPLANT
  • OpenPlant | AutoPLANT Wiki

• How to change Weld Size in OpenPlant Modeler CONNECT Edition.

  

  Rahul Kumar

  Applies To Product(s): OpenPlant Modeler Version(s): CONNECT Edition 10.07.00.32 (Update 7) Environment: Windows 8.1/10 (64-bit) Area: Graphics Subarea: Customization Original Author: Shubham Sawant…

  • over 1 year ago
  • OpenPlant | AutoPLANT
  • OpenPlant | AutoPLANT Wiki

• How To Create New Associated Property Using Class Editor in OpenPlant Connect Edition

  

  Rahul Kumar

  Applies To Product(s): OpenPlant Modeler CONNECT Edition Version(s): Connect Edition Environment: Windows 10 (64-bit) Area: Class Editor Customization Subarea: N/A Original Author: Harshavardhan K…

  • over 1 year ago
  • OpenPlant | AutoPLANT
  • OpenPlant | AutoPLANT Wiki

• How To Display only Support List for Bill Of Material Report in OpenPlant Isometrics Manager

  

  Scott Walker

  Applies To Product(s): OpenPlant Isometrics Manager Version(s): CONNECT Edition 10.08.00.51 (Update 8) Environment: Windows 8.1/10( 64 bit) Area: Settings/Attributes Subarea: Configuring the BOM and Reports …

  • 24 days ago
  • OpenPlant | AutoPLANT
  • OpenPlant | AutoPLANT Wiki

• How to Map Tracing Property for Use in Open Plant Isometrics

  

  Kestutis Mitkus

  In AutoPLANT you can switch Tracing on and off in Piping > Setup > Drawing Preferences. Tracing on/off is represented by the value 0 or 1 in the Tracing property of each piping component. If you want the Tracing property to be available for OpenPlant…

  • over 4 years ago
  • OpenPlant | AutoPLANT
  • OpenPlant | AutoPLANT Wiki

• How to Modify Static Text of Custom Description in OpenPlant Specification Generator

  

  Jaya Tiwari

  Applies To Product(s): OpenPlant Modeler Version(s): 08.11.09.XXX Environment: Windows 7 (64 bit) Area: OpenPlant Specification Generator Subarea: Custom Description Original Author…

  • over 5 years ago
  • OpenPlant | AutoPLANT
  • OpenPlant | AutoPLANT Wiki

• How to Push New Schema Changes to Already Provisioned PlantSight WorkSet for OpenPlant Modeler CONNECT Edition

  

  Rahul Kumar

  Applies To Product(s): OpenPlant Modeler CONNECT Edition Update 8 Version(s): 10.08.00.51 Environment: Windows 10 (64-bit) Area: Schema Customization Subarea: PlantSight Integrated WorkSet Original Author…

  • over 1 year ago
  • OpenPlant | AutoPLANT
  • OpenPlant | AutoPLANT Wiki

• How to Remove Insulation/Tracing for desired components in Isometrics.

  

  Scott Walker

  Applies To Product(s): OpenPlant Isometrics Manager Version(s): CONNECT Edition 10.09.00.74 Environment: Windows 8.1/10 (64-bit) Area: Insulation/Tracing Subarea: Customization Original Author: Shubham…

  • 24 days ago
  • OpenPlant | AutoPLANT
  • OpenPlant | AutoPLANT Wiki

• How to Report Pipe Cut list in Multiple Columns

  

  Kestutis Mitkus

  Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.11.XXX (SS6) Environment: Windows 7/8.1/10 (64 bit) Area: Settings/Attributes Subarea: Configuring the BOM and Reports Original Author…

  • over 4 years ago
  • OpenPlant | AutoPLANT
  • OpenPlant | AutoPLANT Wiki

• How to Report the Reinforcing Pad Using Schema Customization in OpenPlant Isometrics Manager

  

  Vidit Ruhela

  Applies to Product(s): OpenPlant Isometrics Manager Version(s): 08.11.11.224 (SS6) Environment: Windows 7/8.1/10 (64-bit) Area: Settings/Attributes Subarea: Original Author: Swapnil Joshi, Bentley Product…

  • over 4 years ago
  • OpenPlant | AutoPLANT
  • OpenPlant | AutoPLANT Wiki

• How to Run AutoCAD Script (.SCR) on Generated dwg Isometrics

  

  Kestutis Mitkus

  Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.11.XXX (SS6) Environment: Windows 7/8.1/10 (64 bit) Area: Processing Subarea: Original Author: Abhijit Bute Bentley Product Advantage…

  • over 4 years ago
  • OpenPlant | AutoPLANT
  • OpenPlant | AutoPLANT Wiki

• How to Use the Isometric Cleanup When the Output Format is DWG/PDF

  

  Kestutis Mitkus

  Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.09.XXX (SS5) | 08.11.11.285 (SS6) Environment: Windows 7/8.1/10 (64 bit) Area: Settings/Attributes Subarea: Original Author…

  • over 4 years ago
  • OpenPlant | AutoPLANT
  • OpenPlant | AutoPLANT Wiki

• Modifying Text and Annotation for AutoPLANT - OpenPlant Isometrics

  

  Kestutis Mitkus

  See Index: How to Avoid Note Box Overlap with Inside Text How to Change Miscellaneous Attachment Annotation Container How to Change Text Font, Size, Color and Location in BOM Using Text Nodes How to Disable Unwanted Text Node Values in the AutoPLANT…

  • over 4 years ago
  • OpenPlant | AutoPLANT
  • OpenPlant | AutoPLANT Wiki

• Modifying Text and Annotation Settings

  

  Kestutis Mitkus

  Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.09.XXX Environment: Windows 7 64 bit Area: Settings/Attributes Subarea: - Original Author: Keith…

  • over 4 years ago
  • OpenPlant | AutoPLANT
  • OpenPlant | AutoPLANT Wiki

• To Dimension Slip-on Flange from Face End in Isometrics

  

  Rahul Kumar

  Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.09.470 / 08.11.09.564 Environment: Windows 7 (64 bit) Area: Settings/Attributes Subarea: - Original Author: Rahul Kumar, Bentley Product…

  • over 7 years ago
  • OpenPlant | AutoPLANT
  • OpenPlant | AutoPLANT Wiki

• To Display Tracing on Pipeline in OpenPlant Isometric Manager

  

  Abhilash Panchal

  Applies To Product(s): OpenPlant Modeler Version(s): 08.11.09.XXX (SS5) | 08.11.11.XX (SS6) Environment: Windows 7/8.1/10 (64-bit) Area: Settings Subarea: - Original Author: Abhilash Panchal,Bentley…

  • over 5 years ago
  • OpenPlant | AutoPLANT
  • OpenPlant | AutoPLANT Wiki