Graphical input not working

Margaux Moreau — Wed, 06 Jun 2018 03:02:53 GMT

hi,

All of a sudden, my grphical input is not working anymore.

the report is properly built but when i select any field, tables don't show up.

I'm working on Gint 10.00.00.50

Is it coming from the software? it was working so far and is still working on my collegue computer.

Cheers

Marg

N value not showing on report

Margaux Moreau — Wed, 06 Jun 2018 02:16:45 GMT

Hi,

I've got the following code:

<<Let(Div = "/")>><<Rem: divider between blows within traditional 150mm step>>_
<<Let(GrpDiv = <<CR>>)>><<Rem: divider between 150mm step blows>>_
<<Let(PartsDiv = <<CR>>)>><<Rem: divider between different parts of reported result>>_
<<Let(Ngt50 = "N > 50")>>_
_
<<Rem: Check that seating blows have been recorded>>_
<<HasData(<<ISPT.ISPT_INC1>> _
          <<ISPT.ISPT_INC2>> _
,_
<<Rem: Seating display>>_
<<Let(UseDiv =_
       <<IIf(<<DataCount(<<ISPT.ISPT_INC1>>_
                        ,<<ISPT.ISPT_INC2>>_
                )>> _
             > 1 _
           ,<<Get(Div)>>_
           ,""_
         )>>_
    )>>_
<<ISPT.ISPT_INC1>>_
<<Get(UseDiv)>>_
     <<ISPT.ISPT_INC2>>_
_
<<Rem: First 150 mm test display>>_
<<Rem: check if blow data exists>>_
<<HasData(<<ISPT.ISPT_INC3>> _
          <<ISPT.ISPT_INC4>> _
   ,<<Get(GrpDiv)>>_
       <<Let(UseDiv =_
          <<IIf(<<DataCount(<<ISPT.ISPT_INC3>>_
                           ,<<ISPT.ISPT_INC4>>_
                    )>> _
                 > 1 _
              ,<<Get(Div)>>_
              ,""_
           )>>_
        )>>_
      <<ISPT.ISPT_INC3>>_
        <<Get(UseDiv)>>_
           <<ISPT.ISPT_INC4>>_
   ,<<Rem: no data exist - do nothing>> _
)>>_
_
<<Rem: Last 150 mm test display>>_
<<Rem: check if blow data exists>>_
<<HasData(<<ISPT.ISPT_INC5>>_
          <<ISPT.ISPT_INC6>>_
    ,<<Get(GrpDiv)>>_
        <<Let(UseDiv =_
           <<IIf(<<DataCount(<<ISPT.ISPT_INC5>>_
                            ,<<ISPT.ISPT_INC6>>_
                   )>> _
                 > 1 _
              ,<<Get(Div)>>_
              ,""_
           )>>_
         )>>_
       <<ISPT.ISPT_INC5>>_
         <<Get(UseDiv)>>_
            <<ISPT.ISPT_INC6>>_
    ,<<Rem: no data exist - do nothing>> _
)>>_
_
<<Rem: determine length & if short>>_
<<Let(TLen = _
   <<User System Data.SPT_penetrationLength>>)>> _
<<IIf(<<Get(TLen)>> < 450 _
   ,<<Get(PartsDiv)>>for <<FirstData(<<ISPT.ISPT_PEN6>>_
                         ,<<ISPT.ISPT_PEN5>>_
                         ,<<ISPT.ISPT_PEN4>>_
                         ,<<ISPT.ISPT_PEN3>>_
                         ,<<ISPT.ISPT_PEN2>>_
                         ,<<ISPT.ISPT_PEN1>>_
               )>>mm _
)>>_
_
<<Rem: determine N report>> _
<<Let(Tot =<<Calc(<<ISPT.ISPT_INC3>> _
                + <<ISPT.ISPT_INC4>> _
                + <<ISPT.ISPT_INC5>> _
                + <<ISPT.ISPT_INC6>>_
              )>>_
      )>>_
<<Get(PartsDiv)>>N = <<FirstData(<<ISPT.ISPT_NVAL>>_
                            ,<<Get(Tot)>>_
                )>>_
<<IIf(<<ISPT.ISPT_Bouncing>> = true, bouncing,"")>>
<<Rem: type and remarks>>_
<<CASE(<<ISPT.ISPT_TYPE>>_
   , = "C" _
       ,<<Get(PartsDiv)>>(solid cone)_
   , = "L" _
       ,<<Get(PartsDiv)>>(lined)_
   , = "N" _
       ,<<Get(PartsDiv)>>(no liner)_
    )>>_
<<Get(PartsDiv)>><<ISPT.ISPT_REM>>_
)>>

And for some reason, my N values are not showing up when my total penetration is less than 450 mm AND if the total blows are less than 50.

Anyone got any idea of what I am missing here?

Thanks

Hello, how can i get the table in project database to show up on the report design?

Margaux Moreau — Tue, 05 Jun 2018 22:57:39 GMT

I'm trying to modify one of our report (add a field indicating if the SPT are bouncing or not).

I've created a new table in project database and I'm not coding the report building. I would like all the tables to show up on the table lookup tool and not only the library ones. How (and can I) get that done?

Thanks

Ask A Question I

Tue, 05 Jun 2018 18:50:29 GMT

Ask a question in a forum.

Margaux Moreau's Activities

Graphical input not working

N value not showing on report

Hello, how can i get the table in project database to show up on the report design?

Ask A Question I