• 04m. Model Cryogenic piping in AutoPIPE

    Applies To Product(s): AutoPIPE Version(s): ALL Area: Modeling Original Author: Bentley Technical Support Group Date Logged & Current Version Apr. 2016 10.01.00.05 Problem: How…

  • 05. Bentley AutoPIPE Application has stopped working: When importing NTL file into AutoPIPE

    Applies To Product(s): AutoPIPE Version(s): 2004, XM, V8i Environment: N/A Area: Subarea: Original Author: Bentley Technical Support Group Date Logged & Current…

  • AutoPIPE's Most Wanted

    AutoPIPE's CAE development team is constantly updating the program with new enhancements based in part on already logged enhancements from Service Requests and our belief what users would like added to the program. However, we would like to provide another…

  • Designing to ASME B31.5 - Refrigeration Piping

    Hi, I have found the following: https://communities.bentley.com/products/pipe_stress_analysis/w/pipe_stress_analysis__wiki/27978/04m-model-cryogenic-piping-in-autopipe https://communities.bentley.com/products/pipe_stress_analysis/w/pipe_stress_analysis__wiki…

  • Guide support modeling

    Hi, Please help me. I would like to model guide support for cryogenic pipeline like on the sketch below. The guide support is 300 mm lenght. Shall I model as two guide supports with spacing 300 mm between each other? I assume that Autopipe treat…

  • Modelling Stauff Clamp

    Thank you for all your excellant answers to my previous questions. I've got another slightly tricky one for you. How should a Stauff Clamp be modelled? These pipe clamps have a plastic liner and restrain lateral and up/down movement, but also axial…

  • Suppress Connect project chooser dialog

    How do I disable Connect project chooser dialog when using Multiframe COM automation interface. Multiframe requires user input at this dialog (either cancel or select a project) - takes away from the whole point of using COM interface. For our purposes…

  • U-bolts

    I have a question on how to model U-bolts in Autopipe. If the U-bolts holding a pipe are not clamped down tight to the pipe I have been modelling them as a guide. If the U-bolts are clamped tight can anyone tell me the proper way to model these supports…
Communities
Support and Services
Training and Learning
Social Media