Michael Veerman's Activities

Grass Terrain shown in White

Michael Veerman — Fri, 20 Jan 2023 19:55:45 GMT

How do I get the grass to appear in green and have texture (last image shows what I want):

I want this:

Convert LandXML to a Mesh Surface to allow for AutoTURN to Read?

Michael Veerman — Wed, 08 Feb 2023 03:29:43 GMT

Hello, I have a drawing with an imported LandXML which projects a surface. In order for AutoTURN read the surface, the LandXML/Geopack surface needs to appear as a triangulated Mesh so that AutoTURN Pro can use to generate a 3D simulation.

Just to illustrate, I want to turn this:

Into something like this (Surface Readable by AutoTURN):

Any help would be greatly appreciated.

Thank you!

Extract Vertical Profile from Linear Template

Michael Veerman — Wed, 11 Jan 2023 00:02:26 GMT

communities.bentley.com/.../3618.test10.dgn

Attached is an intersection drawing I am working in (working in 2D view). I need to extract vertical profile information from particular lines of a linear template tied to an alignment that has an active profile associated with it. If I select the alignment itself, my application is able to identify that it has a vertical profile (below image):

However, if I select one of the lines generated from the linear template (construction lines turned off), my application fails to recognize a vertical profile associated with the line. For example, in the image below I am selecting the back of the sidewalk from the linear template.

I am using the linear template Curb/Gutter/Buffer - Sidewalk - Tie Slope (below image):

Any help would be appreciated.

Thank you!

Delete an Invalid Element

Michael Veerman — Tue, 10 Jan 2023 01:53:56 GMT

communities.bentley.com/.../test10.dgn

Hello, I am trying to delete an invalid element (attached image). I have also attached the file. It is at the NW corner of the intersection.

I have been looking around and learned previous people who have been facing the same issue and this is the best answer I could find (does not work)

Open level manager & create a new “junk” level
Select the elements
Set elements to “junk” level
Use keyin "level element delete junk"

Any help would be appreciated.

Thank you!

Sidewalk Template Constraints Challenge

Michael Veerman — Tue, 03 Jan 2023 20:04:25 GMT

Hello, I am currently in the process of creating an intersection in ORD and displaying the critical components (Curb and Sidewalk) in 3D. For the SW corner (first attached image), there is a smooth arc representing the curb and then the back of the sidewalk is a jagged line.

Ultimately my goal is to have the sidewalk tie into the curb (second attached image). I have also attached the file herecommunities.bentley.com/.../test9.dgn.

How do I Mirror a Corridor Template

Michael Veerman — Wed, 28 Dec 2022 08:36:48 GMT

communities.bentley.com/.../test7.dgn
communities.bentley.com/.../Original-Ground.dtm

Hello, I have a drawing where I am creating an intersection over terrain. I am in the process of creating alignments with profiles at each of the 4 corners for each of the flowlines and back of sidewalks (shown in red).

I have figured out how to drop a template on each of the alignments (one for curb and gutter and one for sidewalk). Unfortunately I am running into 2 issues:
i) Curb and Gutter is generating backwards (gutter extending toward sidewalk)
ii) Sidewalk is not wide enough

I have selected Edit Template Drop to try and mirror the Curb and Gutter template, but it was unresponsive to the Mirror or Reflect checkbox (below image).

I have attached the drawing file and terrain file. It would be greatly appreciated if I can be provided step by step instructions on how to do this properly.

Convert Complex Chain into Alignment with Vertical Profile

Michael Veerman — Tue, 06 Dec 2022 23:59:01 GMT

Hello,

I am wondering if there is a way to turn a Complex Chain into an alignment with an active vertical profile. In other words, I want all of the yellow lines in the intersection drawing to have varying elevations associated with them. Currently, the Complex Chains only have X and Y values.

Attached are screenshots pinpointing Complex Chain(s) in question as well as the .dgn file (imperial units) I am working with.

communities.bentley.com/.../AQR-Intersection-ORD-_2D00_-MV-Working5.dgn

Ask A Question I

Tue, 06 Dec 2022 04:08:19 GMT

Ask a question in a forum.