https://communities.bentley.com/members/821e1003_2d00_f656_2d00_4fd3_2d00_9d15_2d00_2ba15514ba35Ryan Pietila's recent activityen-USTelligent Community 12https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/187530/export-to-dtmThu, 24 Oct 2019 17:07:23 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:1f67e7f1-bb2f-4d24-872a-e115f8b5f484Ryan Pietila<p>I am trying to export a terrain model as a dtm. The actual export seems fine. When I open another file and create a terrain from file, there are less contour lines and they are not in the same locations as in the model. Also, the contour call outs are about 1/3 of what they should be. I have compared the model to the exported dtm and found a few things<br /> 1. If I turn on the triangle network on both files they look exactly the same other than the fact that the contours are in different locations<br /> 2. Both files are in FT when I look at the file settings<br /> 3. If I use the measure distance tool, both files measure the same distances.<br /> 4. The both files label the contours in FT units</p> <p>In another file I imported the same dtm but this time I chose meters as the sources&#39; units. This time everything looked correct including the contours.</p> <p>Any information on how I could correct this would be greatly appreciated. Thanks.</p><div style="clear:both;"></div>https://communities.bentley.com/achievements/460ac7df-7ccc-4c42-a204-9e05eef3be09Thu, 24 Oct 2019 03:37:18 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:ac2cc854-f222-4200-8a62-5dbdc3d191f9Ask a question in a forum.