Mark Linville

You might also want to check the Civil File Manger tool for downgrading, upgrading or aligning dgn files with a given product: communities.bentley.com/.../civil-file-manager

So, PowerSurvey doesn't come with a PDF.PLTCFG file? I have PowerInRoads, so the path might be different, but I can find that file in C:\ProgramData\Bentley\PowerInRoads V8i (SELECTseries)\WorkSpace\System\pltcfg\ That plots directly to PDF, no third…

If you use RGB color 255,255,255, instead of color "0" you should get white, instead of "white-invert". Color 0 shows white on a black background and black on a white background; it's designed to invert like that so you can see it on the screen and print…

Apologies if I am not understanding the question. But in this case, can you create a new drawing for the sheet and bring the linework in as a reference then clip?

Once the ALG has been imported into the ORD file as an alignment, the alignment is saved as part of the ORD file. SS2 required separate non-graphic data files to store civil information. ORD actually can store all of the rules and definitions as part…

ALG files can be imported into OpenRoads. See https://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/51601/video-how-to-import-native-inroads-alg-into-openroads-designer-connect-edition Reports can be generated as shown…

The distance between the 50' tick and 18+00 appears to match the distance between 18+00 and the next 50' tick. The distance between the start of the alignment and the first 50' tick appears to be very close to the 50' intervals shown on the alignment…

That shouldn't be. Have you reviewed the alignment (Geometry>Review Horizontal...)? Where did you find the Change direction tool? I suspect you used the MicroStation tool which changes the direction of graphics elements. You need to use the InRoads…

Hello Mark, When they arrive to the OpenRoads Designer Downloads Page, they will need to change the Version picklist, then click Apply .