CEM 85's Activities

ORD - Civil Cell problems when creating roundabouts

Daniel Boateng — Tue, 23 Mar 2021 07:33:52 GMT

Hello,

I am trying to create a roundabout using the civil cells. However after going through the process of selecting the primary and secondary alignments, the cell and associated corridor and alignments are generated miles away from the intended location.

Dont know whether its a clitch in the software or if I am doing something wrong. Attached is an image illustrating the problem. I am using version 10.9.0.91

InRoads Bridge Geometry - Create Girders

Ethan Baker — Tue, 17 Dec 2019 18:05:15 GMT

I would like to use the InRoads Bridge Geometry tools to quickly layout girders on a tightly curved bridge. This would be a very useful tool if I could get it to work. Instead of manually drawing girder lines and checking max/min deck overhang, max/min spacing, etc. I could just tell the program those parameters and it would find a solution.

I have a geometry project file that contains the horizontal and vertical alignment. I am able to create the slab fascia and abutment/bents fairly easily with the bridge geometry tools, but when I try to create the girders, I get either 1 of 2 errors: (1) Incomplete or no abutment lines found, (2) Duplicate alignment selected. What could I be doing wrong?

I've made sure that my abutment/bent lines cross the slab fascia and that the alignment is always activated. I am using Power InRoads V8i SS4 08.11.09.904

Name of horizontal alignment in plan

Yamini Dasari — Sat, 29 Sep 2018 10:23:23 GMT

Hi All,

Is there a way to annotate horizontal alignment name in plan? I have many horizontal alignments and I cannot do it manually.

Thanks in Advance

Yamini

Dynamic Cell

CEM 85 — Mon, 23 Nov 2020 14:27:17 GMT

Hi. i have tried to create dynamic cell by DDD tools. but it is not avaliable for my need.

on the picture;

i have a bridge abutment. i need to move one side of abutment automaticly.

Do we have any option for that? I dont need dimension. Just drawing. for example, i am going to slide one side of cell. That is going to take this shape.

if you can help me, that will my work really fast.

thank you

CULVERT LAY OUT FROM CROSS SECTION

CEM 85 — Thu, 27 Aug 2020 13:59:50 GMT

Hello,

I need to lay out culverts from cross section drawing. After that i am going to display them on the plan and profil. Is it possible to lay out culvert like lay out from plan?

thanks.

Microstation 08.11.09.714 ss3

InRoads 08.11.07.428 ss2

Ask A Question I

Wed, 24 Apr 2019 00:21:54 GMT

Ask a question in a forum.

MULTIPLE FILL AREAS IN ONE CROS SECTION

CEM 85 — Wed, 24 Apr 2019 08:36:41 GMT

Hello everyone.

I need to calculate multiple fill areas in one cross section as shown on photo.

I can do that, if i create two section set and take difference by two step. I need to take by one step. Because i will annotate tabulated area for both of them in each sections.

Thanks.

LAYON FOR ALL LAYOUTS

CEM 85 — Mon, 19 Jun 2017 10:01:32 GMT

Hello.

When I add any references, i have to get in to all layouts and do "layon" for that reference.Do we have any easy way to do this? Because it takes really long time.

Geographic Coordinate System is empty.

CEM 85 — Mon, 03 Oct 2016 17:53:28 GMT

I am using Ms SS3. I had been using coordinated system normally but now it is empty. If I take any .dgn files which is normally has a coordinate system, also it seems empty. So i can't import any system too. how i can bring them back?

Thanks.

postimg.org/.../

REDAN(FOOTSTEP EXCAVATION)

CEM 85 — Thu, 17 Mar 2016 08:00:26 GMT

Hello.

I need to draw and calculate the area of "redan excavation"(as seen sketch in below) in cross sections.

For now i have to corvert dgn file to dwg file and use a simple lisp in autocad. but while ı am using the lisp, i have to select properties in cross secitons one by one and it takes long time. also if i change the model i have to do all of them again for all.

Is there any way to do this in model or anywhere else in inroads or microstation?

Best Regards.