• [V8i] End-Area Volume Problem in Cross Sections

    Hi everyone, i have a problem when i make volume calculations. I have a different type road section, with tunnel and with a channel between them. The road passes through a river so we make some culverts under the tunnels for construction. My problem…
  • Annotating Turnouts in Profile

    All I have a bit of an issue - more of an annoyance with annotating turnouts/crossovers in my vertical profile. Would appreciate any help Am using the "Display Turnouts In Profile" tool to display points and stationing for the physical toe (.1), the…
  • Bölgesel Ayarlar

    InRoads ve PowerCivil yazılımının düzgün çalışabilmesi için Windows bölgesel ayarlarından biçim (format) olarak İngilizce (Amerikan) seçili olmalıdır. Bunu denetim masasından bölge ve dil komutuna girerek değiştirebilirsiniz. Bu seçimin yapılmaması…
  • Cannot import profile into OpenRoads file to an existing horizontal alignment.

    I am trying to work on a profile in Geopak and then import the vertical alignment into SS3 OpenRoads to an existing horizontal alignment. Every time I try to import, a new horizontal alignment is created. Is there a way to import a profile to an existing…
  • Copying the Turnouts to another Horizontal Alignment

    Hi everyone. I have a railway alignment and also many turnouts. I had to revise my alignment's end part and copied that horizontal alignment with different name. I created the new alignment's profile and tried to annotate the turnouts but it didn't. How…
  • Corridor Modeling & Cross Sections (SS4)

    The following resources are provided as a reference by Bentley's Technical Support Group. Corridor Creation & Manipulation Video Clips Video: Overview of Corridor Modeler Tools Video: Corridor Design Overview Video: Simple Workflow for…
  • Creating a Simple Pond in a Civil Cell

    Product(s): InRoads, MX, GEOPAK Version(s): 08.11.09+ Area: Civil Cells Original Author: Beebe Ray, Bentley Technical Support Group This is an example of creating a simple civil cell that represents a pond. The pond…
  • Diamond Crossings

    Is there a way to have curves assigned to the crossing alignment in a Diamond Crossing? In the UK Diamonds have radii defined throughout the crossing but it does not look like there is a way to define these in either the Turnout library or the Switch…
  • Feature Definitions in PRT SS4 with OpenRoads Modeller

    All Have just upgraded to PowerRail Track SS4. This is the first version I have used with the OpenRoads Modeller, and I have mixed feelings. I have a couple of questions that I would appreciate some clarification on if anyone has any experience -…
  • How to create scissors crossover in Power Rail Track (SS2)

    Hi, In my project I have to introduce Scissors crossover between two stabling tracks with 5.5m track center. Can anyone explain me how to create scissors crossover with 1:4.444 Diamond crossing and 190R-1:9 Turnouts in Power Rail Track SS2 (PRT)?…
  • Import IRD into OpenRoads

    Product(s): InRoads Version(s): 08.11.09.674+ Area: Corridor Modeling Original Author: Jacquelyn Pettus, Bentley Technical Support Group Question: Is it possible to import an IRD into OpenRoads? Answer: A new…
  • InRoads Vertical Alignmnet Work Flow

    New to InRoads, but I am trying to create profile views based the center lines of levees and floodwalls. I have been following some online tutorials, but I believe might have missed a step in the work flow. The follwing is a list of steps I took to get…
  • Openroads

    I was wondering if there is a way to check the slopes and elevations on my proposed coridor, kind of like the height slope tool when trying to look at surface elevations and slopes.
  • Rail Track (SS4)

    The following resources are provided as a reference by Bentley's Technical Support Group. Video Clips Video: Applying Cant with Rail Track Video: Placing 3D Cells Rotated With Cant Video: Importing SS2 Rail Track project into SS4 Video…
  • Symmetrical Turnout

    Hi there, I'm filling a turnout-library in RailTrack with all the turnouts for the company I'm currently working. They also use two symmetrical turnouts, and I can't figure out how to enter these in the library. As far as I can see all calculations…
  • TCK Menüsü

    TCK menüsü standartların kapsamında olmayan ek macro ve add-on'lardan oluşan, ayrı lisansı olan bir yazılımdır. Yazılımın indirme adresi için Bentley Türkiye ofisi ile iletişime geçebilirsiniz. TCK menüsü InRoads ve PowerCivil SS4 versiyonu için hazırdır…
  • Vertical Alignment Imported from Native into OpenRoads is Not Ruled

    Product(s): InRoads, MX, GEOPAK Version(s): 08.11.09+ Area: General Geometry Original Author: Jacquelyn Pettus, Bentley Technical Support Group Question: I am attempting to import geometry into OpenRoads using the…
  • Vertical Curve Set - PI Placement at Precise Values

    Applies To Product(s): InRoads Version(s): 08.11.07.615 Environment: N/A Area: Geometry Subarea: Original Author: Chris Key, Bentley Technical Support Group …
  • Video: Create Shunt Limits

    Applies To Product(s): Bentley Rail Track Version(s): V8.7+ Environment: N/A Area: N/A Subarea: N/A Original Author: Bentley…
  • Video: Swept Envelope Analysis

    Product(s): Bentley Rail Track, Power Rail Track Version(s): 08.11.09+ Area: Rail This video demonstrates creating a new vehicle for the Swept Path Analysis tool, and running that vehicle along a horizontal/vertical/cant alignment…