Ross Brown

Rod,

Here's how it will ideally work:

One Configuation:

The variaous products will eventually establish the _USTN_PRODUCT_ONE_GROUPNAME as a  predefined variable.  These will be something like Building, Civil, Plant, Structural.  These variables can naturally…

Shawn Cooke - I use the Bentley Configuration Explorer application. The screen shot shows the application's file history dialog.

https://www.bentley.com/en/products/product-line/modeling-and-visualization-software/bentley-configuration-explorer

It looks like a small change occurred in the report structure and must be changed in the XSL.

Where @existingGroundElevation is found it should be replaced with centerLinePoint/@existingElevation

So the path is not anymore centerLinePoint/point but centerLinePoint…

Any update on

Marc Blancher said:

Enhancement 979916:[CIF] Need dgnlib update feature definitions to update existing DGNs with changes to feature definitions in dgnlib

Julian

Use 'Terrain > Analysis > Analyse Point' to show a dynamic contour at the cursor position. Left click to place the dynamic contour as an element in the DGN. This element should be usable for use as boundary etc. To snap to required contour (to ensure…

Thanks for the extra information Jan - all understood.

Let me have a think about this, and I will get back to you (although I have some vacation coming up, so it may not be for a few weeks). 

There may be something in the seed file you are using to create the new DGN which has some civil model data.  There is a workflow for deleting all civil model data from a DGN, but this may be specific to SS4.   You can try it in SS3, but I don't know if…

Hi guys,

Apologies for the delay, I haven't had a chance to have another look at cross sections for a while as I was exhausted from trying to get them converted. I think the Dynamic nature of these is absolutely fantastic, but unfortunately we need…

Stewart (and anyone else who reads this)

Here is a PDF I put together to try explain what I did - not necessarily the correct way! And I hope I have explained all the steps i took.

NOTE: I will NOT be answering questions on the document - This is supplied…