Joe's Activities

请问有没纵断面和横断面标注出图的模板或者视频

Jie Zhou — Fri, 01 Jul 2022 08:41:25 GMT

请问有没纵断面和横断面标注出图的模板或者视频，谢谢

用ORD出纵断面图的时候，为什么出来的超高示意图跟实际定义的超高不符，确切说是一些关键超高点无法显示，具体可见下图，麻烦老师帮忙看一下，是不是软件存在bug?

Joe — Thu, 12 May 2022 00:57:31 GMT

以下就是我的截图以及具体参数设置，前六张图是问题，最后一张图呢，其实就是同样的出图种子出来的效果，这个是没问题的，但这个只是个样图，并不具有代表性，麻烦老师帮忙看一下。目前采用的版本是10.09，但最新版本的ORD for china 10.10.26我也测试了并看了相关的标注组定义跟我的设置一样，同样存在问题。特别着急，在线等......

Profile Annotation with Superelevation in openroads

Joe — Thu, 12 May 2022 01:22:12 GMT

Hi, When using ORD to produce the profile sheet, why does the schematic diagram of superelevation differ from the actual definition of superelevation?

To be exact, some key superelevation points cannot be displayed(I have set superelevation annotation group),

please see the following figure for details. Please kindly help to check whether there is a bug in the software.

@Kevin McDonald,@Mark Marnell. Pls help me.

I have test the latest software 10.10.26, the same question.

So i have doubted about whether there is a bug about superelevation production.

Software:10.09.

Making Connections

Fri, 08 Apr 2022 05:30:58 GMT

Make 5 friends within the community.

Why horizontal name not display in template drop dialog and corridor object?

Joe — Thu, 20 Jan 2022 05:30:19 GMT

i tried to display the horizontal name,but not displayed.why?

I hope someone can answer this problem.

edition:ORD 10.0

Minimum Transition Before/After Drop command Openroads

Joe — Sun, 16 Jan 2022 08:04:52 GMT

How to use Minimum Transition Before/After Drop command,what 's the purpose of this command?

Thanks advance!

Edition:ORD 10.0

二次开发MS，配置开发环境时，如何按如下截图显示MS的功能呢？

Joe — Wed, 22 Dec 2021 01:42:52 GMT

请问老师，我是看的外文教程，如何在启动VS创建项目时，按上图界面那样子，让MS的相关功能及Bentley界面出来？？？我们在配置开发环境时，特别麻烦

一步步学习MicroStation CE Addin开发问题（1）

Joe — Fri, 24 Dec 2021 11:06:21 GMT

来源：https://communities.bentley.com/communities/other_communities/bdn_other_communities/w/chinabdn-wiki/38462/6-dgnprimitivetool-dgnelementsettool

照着这个步骤来做，在两处地方出现两个错误，找不到原因，请老师指点一下。

这两个错误应该都是同一个问题，引用的工作空间，也完全是按照案例来的，希望解决一下，困扰我一整天了

MS按一定间隔放置三维体

Joe — Tue, 21 Dec 2021 03:17:06 GMT

MicroStation如何在曲线段，让路缘石沿着曲线走向放置？上图并没有按照曲线走向放置，如果用拉伸实体则可以沿着曲线走向拉伸，但是无法间隔放置，这个问题该如何解决？跪求......

Let me Help You

Fri, 05 Nov 2021 08:02:35 GMT

Answer a question that is verified as helpful or correct.

Sheet models missing after cross section production finished

Joe — Sat, 30 Oct 2021 07:39:44 GMT

Hi, there?

I encountered a strange thing:

when I finished cross section production, just only one sheed model is created, the others is not created.

But in the processing, I can sheet models and drawing models are creating?

where are the sheet models?

thanks in advance!!!

ORD 10.09 edition

Ask A Question II

Sat, 30 Oct 2021 06:34:18 GMT

Ask 10 questions in a forum.

Referenced Text Favourite text color not display in Openroads cross section production

Joe — Sat, 30 Oct 2021 06:33:02 GMT

Hi, there?

I found the question.

when i create a text favourite and use it in XS production,

the favourite text color can't display in drawing model and sheet model.

Picture 1 shows that different color's text.

Picture 2 cant display the color of the text from text favourite.

I am confused of this, is it a bug?

Pls help me!

Software Edition :ORD 10.9

ORD高级出图

Joe — Fri, 03 Sep 2021 06:56:13 GMT

我之前看了安老师讲的出图视频，我遇到了一个问题，就是始终无法完全填充这个图框，长度都按比例计算过了，但是总会留那么一点空白，这个不知道怎么解决？

感觉这个地方没法控制，不知道这个有遇到过吗？主要对于曲线段而言，毕竟路线大部分都是曲线的，直线没问题。

OpenRoads Designer model display about components and end conditions overlay

Joe — Fri, 13 Aug 2021 07:00:20 GMT

When components and end conditions overlay on earth shoulder, how can control the display priority. I just wanna see the end condition,not component！ hope answer!