Stored graphics alignment not matching actual stationing

Megan Mcdonald — Tue, 17 Nov 2015 23:52:46 GMT

I am creating an alignment within geopak using "store graphics". However I've noticed that while the length of my alignment should be approx 6028', it's only coming out to 5980'. It appears that my curves are being stored shorter than what they actually are. For instance, my first curve is 60.53', but only storing as 57.80'.

To add to my frustration, plan view labeling is measuring my stationing correctly - i.e. my first curve station is showing at 200+57.80 (57.80' long curve) per the Design and Computation Manager stationing, but in plan view labeler it's showing the correct stationing (based on the length of my first curve - 60.53') as 200+60.53.

Any ideas? I've never seen it happen before. I'm thinking it could be a setting in the design file perhaps? I didn't set up the original file, so not sure if that has anything to do with it.

Thanks.

Geopak - creating a TIN with csv file

Megan Mcdonald — Thu, 03 Sep 2015 20:31:42 GMT

For some reason I'm having trouble getting my csv file to translate into a DTM model/TIN file. Yesterday it seemed to be working just fine, but no matter which avenue I'm taking it never seems to load correctly and I'm stuck without a TIN. What steps should I be following in order to get that set up correctly?

Megan Mcdonald's Activities

Stored graphics alignment not matching actual stationing

Geopak - creating a TIN with csv file