snehasish mondal's Activities

ORD: DGN VERSION COMPATIBILITY

snehasish mondal — Fri, 18 Jan 2019 09:15:17 GMT

HI.

I'm using ORD Coonect Edition 2018 Release to. I got some DGN Files whichwere modelled using newer version. So, now i'm getting the following error "Newer Civil Data Found". There is option to convert the dgn to current version. So. how to use the dgn file with an older version of ORD?

Thanks in advance.

Tasks Tool bar-Civil Tools

snehasish mondal — Tue, 24 Jul 2018 09:00:07 GMT

Can anyone kindly share any material/link on how to make use of these Civil Tools in MX Roads SS4?

ORD-No feature definition after workspace set up.

snehasish mondal — Tue, 12 Feb 2019 13:18:44 GMT

Hi.

I just moved the configuration files from my C drive to another local drive. Changed the Workspace setup configuration file in my C drive. I've changed the following,

1. MY_CIVIL_ORGANIZATION_ROOT

2. MY_WORKSPACES_LOCATION.

3. MY_WORKSET_LOCATION.

Initially I did not change the workset location as I wanted to save my wrkset within the default location within workspace.

The problem is, after doing the set up, though the workspace and workset is directed to the new location, but no feature definition is appearing while working in the dgn. I followed the steps as per the video in learn server.

Unable t figure out what I'm missing. Any help on this regard will be appreciated.

Thanks in advance.

ORD-Reference in wrong position

snehasish mondal — Fri, 01 Mar 2019 06:41:29 GMT

Hi.

I'm facing a problem while attaching reference .dwg file to openroads. This is very common and it is happening in both Openroads Designer and MX Roads.

While attaching a reference, it is coming in wrong position.

Attachment method-Coincident world. The scale and other things are coorecta and the drawing files are not having any issues.

Can anyone kindly help on this issue?

Thanks in Advance.

ORD-Seed File

snehasish mondal — Tue, 29 Jan 2019 12:17:02 GMT

Hi.

While using a 3D seed file, the "Default-3D" in saved views does not appear. And also, in 3D view both of the "Current Active Linear 3D Element", and the "Complex element" for the same 3D Element appears. It creates confusion in 3D views. This does not happen while using 2d Seed file. Can anyone suggest any material to elaborate how these seed file works and when to use 2D and when to use 3D seed file. Additionally, in my design I have used a 3d seed and getting 2 lines for each element which is very confusing and messing with the 3D Model. What can be done about that?

Thanks in advance.

Openroads Terrain

snehasish mondal — Sat, 19 Jan 2019 11:43:12 GMT

Hi.

I've created a terrain model from spot level from a referenced dwg file using graphic filter method. Triangulation was done smoothly. But I'm facing a lot of issue working with the terrain model. As you see in the attached screenshot, irrespective of the contour interval, no contour is being generated. I've tried this both by activating and deactivating the rules. There is no problem with displaying the triangles though. Kindly help.

I'm using Openroads Designer Connect Edition 2018 Release 2.

MX Pavement and Subgrade Design Error: Bad Record number

snehasish mondal — Sat, 19 Jan 2019 12:19:07 GMT

Hi.

I have a 29 km corridor. I have done the pavement and sub grade design for initial 4 km and extracted quantity and cross section. Due to discontinuity in the terrain data, I am trying to do the pavement design for last 22 km stretch, where ground data is available. But, while performing the Pavement and Subgrade design, I am repeatedly getting error saying "Bad Record Number". I am following the below steps:

1.Design Tab-Pavement and Subgrade Design Command

2. Specifying model, mask, start end etc.

3. Pavement Layer Design.

I am getting the error after step 3, and sometime after step 2. Kindly tell me what mistake I am doing and what steps I shall follow.

I'm using MX Roads SS4.

Thanks in advance.

ORD 2018 Release 2 CUI

snehasish mondal — Wed, 16 Jan 2019 05:45:04 GMT

I'm using MX Roads SS4 and OpenRoads Designer.In MX Roads we used to use input method for repetitive work, simply running the command in notepad or through linemode. My question is, is there any similar feature in OpenRoads Designer?

Ask A Question II

Fri, 21 Dec 2018 11:25:25 GMT

Ask 10 questions in a forum.

Intelli Trim

snehasish mondal — Fri, 21 Dec 2018 11:25:23 GMT

I'm using MX Roads SS4. I'm trying to trim some element using Intelli Trim (Quick Mode). I'm following the prompt "Identify element to trim to" and "Create line crossing the element.." But after that, it's not trimming the element. Can anybody kindly suggest why it's happening? Other trimming option, such as "Trim to intersection" and "Trim multiple" etc are working correctly on the same element.

Thanks in advance

Intelli Trim

snehasish mondal — Fri, 21 Dec 2018 11:13:51 GMT

Thanks in advance

MX ROads SS4 Ramp Design Using Civil Cell

snehasish mondal — Fri, 14 Dec 2018 06:32:40 GMT

I'm using MX Roads SS4. In civil cell, already some civil cells are available as in attached image here. But in a Youtube video, I saw some additional Civil Cell for Ramp Design. Are these Civil cell created by the user or is it possible to avail additional civil cell any other way?

MX Roads SS4 Interchange Design.

snehasish mondal — Fri, 14 Dec 2018 06:54:10 GMT

Can anyone kindly suggest any video/t ext material/ hands-on on interchange design (2D and 3D modelling), alongwith Ramp/gore design. The avialable leraning material in Bentley Learn server contains only 2D modelling of ramp.

MX String to Openroads Feature

snehasish mondal — Thu, 29 Nov 2018 10:48:41 GMT

Hi.

I'm using MX Roads SS4.

While importing MX Strings to Openroads feature using "Import Geometry" from General Geometry Tab, only my center line master string having a Geometry string is being converted to Openroads feature properly. Other strings such as Carriageway strings, which are not having an associated geometry strings are not properly converted to Openroads feature, and unable to use Openroads tools or Microstation command on them.

Can anybody suggest me any material to properly convert MX Roads model to Openroads feature so that all strings become usable. The PSS file is already linked to the DGN feature definition.

Thanks in advance.

Mxroad cross section add objects

Andrew Poindexter — Wed, 28 Nov 2018 08:51:34 GMT

Is mxroad can add curb, railing, retaining wall etc to cross section?

As a strings or micro symbol. Or is it possible autocad object converting and attach to cross section. Civil 3d is possible those. But I wondering if mx also can be.