• Tapered T Steel Beam

    Hello. Please advise whether STAADPro. Connect Edition V22 Update 10 can analysis and design tapered 'T' steel beam to Eurocode.

  • Castellated beam

    Please advise whether staadpro can be adopted to analyse and design castellated beam to eurocode. Thank you.

  • Plate elements results

    RC roof check.STD I find that the plate elements bending moment results is unexpected. Where sagging moment is to be reflected, hogging moment (positive moment) is obtained instead. Please advice.

  • Beam idealization

    Hello, I would like to assess the reinforcement required for slab and hence, the maximum moment for slab is needed. Is it correct to idealize the beams as supports at every 1m per enclosed word doc.? Please advise. Thank you. DOCX

  • RE: Beam idealization

    If FY support is fixed, that means that there is no vertical displacement in Y direction. If the beams do not have (or have very small) vertical displacements, then such idealization should be fine. In my opinion, the more accurate way would be to model…

  • Dome structure

    Can a dome structure in Staad.Pro Connect be export to Sketchup?
Communities
Support and Services
Training and Learning
Social Media