• RE: Print Organizer Won't Print In Color

    Pen table would be defined here

    Open Print Organizer and check the properties of one of your Print Definitions. Go to the Advanced tab and see what the Color Options is set to. If set to Monochrome change it to True Color and try again.

    Some screenshots…

  • RE: How To Control Dimension Text Placement

    What you should be looking at to achieve this is to start with using a new Dimension Style. Under the Geometry tab you will see there are Fit Options for how the Text and Leaders operate based on a Minimum Distance that you supply. In the below Dimension…

  • Fill Settings

    Hi,

    I turned on fill in View Settings because an opaque shaded area I placed was not showing its fill, nor was it letting me turn it on in Element Properties. Fine, that much worked. But now every time I place a closed SmartLine it creates an opaque fill…

  • RE: Lost Toolboxes Etc.

    Rene,

    There is a variable you can write to use a seed file  to rebuild the upf..

    I have this in my my workspace config have saved  clean copies for all my users  onto the network 

    if things get out of wack as the  seem to do I an just delete the user.upf and…

  • Re: Changing weight of text note not consistent

    I have seen this behavior before.  Thought it was related to importing DWG files.  Something with the text string line length and justification.  Never was able to pinned it down.  Are they shift to the extreme right or left depending on which side of the…