Monika Dhungana's Activities

Corridor Modeling Cross Section Labeling Run-Time Error '380'

Quinten Jordan — Tue, 29 Mar 2016 20:32:18 GMT

We've recently encountered a Run-Time error never before seen, or at least to us. When we open Cross Section Labeling we receive this error message.

If we click on Debug we get this.

Any help? It happens on all of our machines and in all files. PowerGEOPAK version 8.11.07.615.

GPK SS2 Draw Cross Sections from Surfaces

kcaitch — Tue, 04 Feb 2014 12:49:54 GMT

Good morning all,

I am having an issue with GPK drawing my surfaces that I produced from Roadway Designer. When I am in RD, I can flip through the stations and the existing surface and proposed surfaces and information look good. I will then use the Create Surface tool within Roadway Designer and create the proposed DTM file while also displaying the features and components. When I look at the 3D features and components that are created, everything looks good and it covers the full limits of my project. When I go to the Draw Cross Sections from Surfaces tool within Corridor Modeler, I setup both my existing DTM and my new proposed DTM to be drawn. Once it draws these two surfaces, the existing surface is drawn through the end of the project, but the proposed doesn't show up on the last 4 or 5 sections. Any idea why this would be happening?

Thanks,
Ken

GEOPAK Corridor Modeler Questions

Josh M — Fri, 13 May 2016 22:18:29 GMT

I am a long-time GEOPAK user, and I am looking into the new Corridor Modeler approach of roadway design. I have attended a few Distance Learning classes and I believe I understand the basic workflow, but I have run into several snags. Can anyone address these from a GEOPAK perspective?

I sucessfuly imported our ddb file into a xin in order to define styles. I found our ddb file's naming convention is a litte complicated, so I then found a sample xin somewhere that I would like to borrow heavily from. How can I edit a xin file from within GEOPAK? Is this possible, or do I need to edit a ddb and then re-import it into an xin every time?
I have created a a template for a rural section. I would like the ability to have a ditch bottom point follow a special ditch profile and follow a particular graphic element for its alignment rather than be at a fixed offset and elevation relative to the centerline. How do I assign a special ditch profile(s), and how do I search for plan view graphics to define variable offsets?

I know exactly what I need to do in GEOPAK to complete my designs, but I can see the advantage of using a model-based approach offered by Corridor Modeler.

I have trouble justifying spending a lot of money on training on something that I am not even sure we would ever use for production work.

Thanks for any help,

Josh Mauritz

MS v08.11.05.17

GPK v08.11.05.39

Corridor modeling in Power GEOPAK SS2 ddb file error

Ronald Brys — Wed, 08 Jan 2014 01:11:08 GMT

When selecting a ddb file for conversion to an xin file for use in corridor modeler, an error dialog states the file is not able to be converted. However a xin file is created in the rddbs folder but no drafting standards are available. I've tried reselecting the 'job' file, restarting, rebooting and reinstalling the software to no avail. I was trying to convert the default_styles.ddb file provided with the software.Have also tried other ddb files, swapping out the xin file that is created in the rddbs folder. The results are the same in that no drafting standards are available for importing geometry or running roadway designer. Any ideas?

Thanks, Ron

Corridor components not showing in cross section

Monika Dhungana — Mon, 09 May 2016 21:28:56 GMT

Bentley communities has been a great help for me as a new person in Bentley products.

I have a corridor, the cross section misses out all components however it shows label for each point. Any idea what is causing the components line not show up?

I need 2nd help too. The corridor misses assigned control points and corridor is broken at some interval. There is no geometry change, but the corridor misses out some intermediate station.

Thank you.

Geopak SS2 corridor with different template

Monika Dhungana — Wed, 20 Apr 2016 17:22:00 GMT

I am having troubles with intersection model where shoulder needs to disappear as it hits the intersection. I tried with RULES not to show the Shldr, no success so far. Can I assign a separate template for the intersection area without shoulder? I am in horizontal curve at this intersection, and have the criteria to meet superelevation design too. Can 3 different corridors to meet prior to intersection, intersection and post intersection and maintaining full super at the intersection be achievable?

Any suggestions?

Reverse crown superelevation with different slopes

Monika Dhungana — Wed, 13 Apr 2016 21:04:07 GMT

I have an assignment with -2% cross slope prior to a curve. The horizontal curve is supposed to have a reverse crown with -1% on NB lane and -4% on SB lane. The superelevation section creates same cross slopes both sides. Is there anyone who has simple tips for me to achieve a transition of -2% to -1%;- 2% to -4% and transition back -1% to -2% and -4% to -2%. Is there any way I can create separate sections for NB and SB lanes? I am working on GeoPAK SS2 version.

Thanks in advance.

Monika

Terrain model menu is not available in Geopak SS3

Monika Dhungana — Thu, 10 Mar 2016 15:11:44 GMT

My terrain model menu has limited option. I can not import TIN and visualize that. Anybody there to help me out of this. Look at the snapshot, these are the only options I have.

Moni

Chain is missing in Geopak

Monika Dhungana — Thu, 10 Dec 2015 21:54:37 GMT

I am a new user in Geopak. Recently received whole bunch of files from other offices. I have got .gpk; .tin; .obs; and many more among which is MHTML document. I can see the alignment chain has been sent in MHTML format, I could not import them into the project file. Same with surface file, it is sent in MHTML format but the import command does not have option for that. I believe there should be just few clicks to get them in, but for first time user it takes several days.

Moni