Mohd Faraz

Q should I have 3 different members with LZ of 1m or should I have to consider LZ of 3m for all of the 3 members. A LZ should be set to 3m for each of the three segments. -------------------------- Q What if the member(girder) is braced vertically…

If the staircase is a frame structure made up of beams and columns, you may as well model it in STAAD.Pro. Refer to any standard deign textbook that has staircase design and you should be able to see how the loads are calculated for the stair flight and…

You can also use STAAD Advanced Concrete Design software for producing BBS, BOQ & Drawings (Including reinforcing drawings, automated rebar labels, dimensions, and notes, as well as rebar placing drawings, sections, plans, and details) Please go through…

Hi Deshraj, Here is a method that one of my friend (who works in a design consultancy firm) uses, you may have a look : For Joint Weight Calculation, he introduces a pin support at all the beam-column junction of the structure . Then he creates…

A Joint weight is calculated using the same procedure used for calculating a joint load. Is there a particular reason why you want to calculate a joint weight? Member weights, floor weights and element weights are more convenient ways for considering…

RX, RY and RZ represents the rotational displacement about global X , Y and Z axes in radian unit.

Mohd : Releasing MX means you are removing the torsion restraint. First ensure that in your actual structure, you do not have a torsion restraint. Also note that releasing MX at both ends of a member would mean that the member would be able to spin about…

The method 1 is commonly referred to as the batch mode design whereas the method 2 is referred to as the RC Designer ( or Concrete Design mode ). The critical load case is determined based on the reinforcement requirement or in other words the case with…