Oto

Is that a B-spline handle?

I just drew a B-spline and found I could snap to its handles without any any problems, I simply just use Edit Control Points to make the control points visible and I can key-point snap to them just like any normal vertex.

I do not think thata methos is available in CONNECT.

The following is from this thread.

Hi Chris,

There is no longer any need to find the dcdrape.pal file. 

Just do the following:

1. Open the Material Editor
2. Make a new material.(Material>New pull-down menu…

Oto said:

Using code from http://www.la-solutions.co.uk/content/CONNECT/mvba/MVBA-ElementsIdentical.htm

I've revised the function declaration on that page.  I doubt that's the source of your problem, but it helps if I publish correct information!…

In case someone runs into the same problem. I fixed this issue by doing two things:

1- When I upload the photos I get a warning that says the photo positioning is set to "sea level" click this and select the georeference system that you're using in your…

Hi Remy, attached is the Macro.

I've updated the GUI so that there are now options where you can choose if you want to draw a line between the chosen point and the minimum distance point (setting disabled by default), and/or if you want to toggle measurement…

I solved. Page 269 of the manual (october 2021 version):

Chrome:
• Close all running Chrome instances first. The important word here is ‘all’. On Windows, you may check for Chrome instances using the Windows Task Manager. Alternatively, if you see a Chrome…

Oto said:

Could it honor segment orientation also?

Your wish is granted!

I found the same thing. The default mouse button assignment file with CE 10 does not define the Shift+Data button.

I had to edit the button assignment file to add that feature back in.

You can create your own button menu file and have it used as a seed…

Hi Phil,

Here is the solution :

1. Drop the surface elements using the "Drop Element" tool, make sure the option "Application Elements" is toggled on, the result of the operation is that your terrain elements will become meshes which are triangles stitched…