Tarunkumar RAJGOR's Activities

Exception Log Troubleshooting

Edward Yau — Fri, 20 Apr 2018 17:28:23 GMT

What's the best way troubleshoot a problem when I have the exception log? Does Bentley provide support or am i suppose to do it myself? I personally can't decipher it.

target aliasing for surface template

Tarunkumar RAJGOR — Thu, 20 Jan 2022 06:45:24 GMT

Hello all,

Can we process target aliasing for any surface template corridor ? I have a surface template of fixed depth, which is clashing with another highway corridor underneath for some part. Can we target the Highway corridor for surface template to respect it ? the target aliasing tool doesn't allow for surface template.

STENCIL 2D ELEMENT ON 3D GEOMETRY

Tarunkumar RAJGOR — Thu, 30 Jul 2020 17:00:25 GMT

Hi all,

I am having a problem in Open roads designer connect edition with the command STENCIL 2D ELEMENT ON 3D GEOMETRY. This command (in Visualization) helps to drape 2D mesh layer onto 3D surface above it. But for Some surfaces, the 3D DRAPED projection seems to be clashing with the surface onto which the draping has been done. Though the vertical offset is set as 1 cm from the surface onto which draping is done. It works good for most of the surfaces, but on some surfaces (like Bunds) it doesn't.

I have attached an image to understand better. In image, the brown mesh layer has been projected (draped) onto cyan surface layer (with 1 cm vertical offset.. of course !!). For such cyan surface layer here, at some locations there seems to be clash between brown layer and cyan layer. The whole cyan layer should be hidden below the brown layer if all went right.

This happens only in Openroads Designer. In Microstation or Mxroad it gives good / with little clash results.

Merge a specfic level into master

Tarunkumar RAJGOR — Wed, 20 May 2020 08:43:21 GMT

can we merge a perticular level (layer) from attached file to the active dgn without merging whole attached file? I am using merge into master option but that merges whole attached file not a specific level from the file.

DRAPING SURFACES (USING STENCIL)

Tarunkumar RAJGOR — Mon, 11 May 2020 05:16:18 GMT

can we use stecil command in openroads designer to drape multiple 2D surfaces onto terrain (or any 3d surface) simultaneously? Right now i have to use this commande for ONE 2D SURFACE at a time. I have multiple such 2D surfaces in my model hence it is very time consuming task. Is there any method where we can use such draping for multiple 2D surfaces simultaneously/

Pavement layer and subgrade Design(for existing pavement)

Tarunkumar RAJGOR — Tue, 10 Dec 2019 07:46:23 GMT

Can we mask strings (including master string) in Pavement layer and Subgrade Design (For existing pavement) option? I would like to generate cross section in which only service road strings required (only SR INNER-OUTER STRING, SR SHOULDER AND THE EXISTING PAVEMENT PORTION) . The pavement layers of service road are designed according to the existing layers there. we can do it in Pavement layer and Subgrade Design option but for Pavement layer and Subgrade Design (For existing pavement) i am not getting any reasonable method.

earthwork interface mxroad select series 4

Tarunkumar RAJGOR — Mon, 30 Sep 2019 13:24:32 GMT

How to create interface between two strings which are having variable distance between them at every interval (say 10 m) ? I want to make interface from main carriageway earthen shoulder to the service road inner shoulder edge beside it, which is at varying distance every interval.

Ask A Question I

Mon, 30 Sep 2019 01:25:36 GMT

Ask a question in a forum.