Nico Roman

Hi Wes: This looks like a bug. I've reproduced your problem report. I'll pass along your post to our certification team for further verification and logging of a defect. In the meantime, you can use the Microstation partial delete command to remove the…

Use the DTM tools to create a new .DAT file. Add the triangles to the .DAT file then build a TIN from the .DAT file. Probably the triangles are loaded as a mesh. You'll need to drop the mesh down to triangles. Then you can add them to the .DAT file.

If editing the files is not an option then you might try loading the triangles from all the pieces and then adding all of them to a new surface (surface from triangles). When you build the TIN the triangulation should cross the gaps.

Hi Krzysztof, We found where you first reported this in a forum post last November and Defect 152217 was filed at that time. (link to that post below) Due to the timing of the defect report, it did not make it into the SS4 release, however, the defect…

Upon further testing, we were able to reproduce the problem and this is some bug in the program. As an initial test, I changed the design stage assigned to the corridor to the "3-Final" design stage delivered in the example workspace and the issue went…

No automatic way, but you can use the Survey Auto Store Graphics and it will store the points with the X,Y,Z and once you have the cogo points with elevation you can store a profile from the points.

Please try setting this variable in your startup workspace and see if it makes a difference.... #---------------------------------------------------------------------------------------- # Video Graphics Issues - If encountering video issues try enabling…

You can copy this ma to your bin folder where GEOPAK is installed https://communities.bentley.com/cfs-file/__key/communityserver-discussions-components-files/5922/asc2dtm.ma

Please disregard. I had my configuration variable pointing to the wrong folder. MS_BUTTONMENU is now set to the correct .btnmenu Thank you for your time.

Thanks Nico. I had already downloaded this and skimmed it a while ago. I will read it in more detail.

Yes, I have made numerous changes to the templates (I have several with a lot of switches, parametric constraints etc.). I took over the corridor from someone else who left and had to make some changes, but tried to do so without removing backbone components…

and the projdbs folder or at least the .008 file in that folder and place it in another projdbs folder for the new project. By the way some people set up an entire default project and then copy the project and users and projdbs folder when starting a…

I came across a few slides that may help in your research. There are a few overlay component slides at the end that could help you.

Thank you! Problem fixed. I was unaware of that default.