Nader Mostafa's Activities

End Area Volumes - Possible to include components other than simple cut/fill (e.g. unsuitable, substrata etc.)?

Nader Mostafa — Mon, 07 Feb 2022 02:42:25 GMT

Can the EAV report provide numbers other than just simple cut and fill? I understand that the "Create Cut Fill Volumes" command quantifies everything (which is great) - but I'd think the EAV function should be able to tabulate these components as well.. Is there a way to add these values to the EAV report, and subsequently to be annotated on the cross section sheets?

I also do not see anything other than simple cut/fill parameters in the Text Favorites dialogue.

I understand there has been a previous post on this topic here (https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/201795/end-area-volumes-annotation-in-cross-sections/684078#684078) but I wanted to re-post to see if there has been any updates.

Thanks in advance,
Nader

ORD 10.10.01.03

Label elevation of element (or terrain) at any point in 2D in ORD CONNECT

Nader Mostafa — Sat, 13 Nov 2021 14:51:23 GMT

Hello all,

Using ORD CONNECT Edition, I would like to be able to display the elevation of an element or a terrain WITHOUT having to use the "Analyze Point" tool or the "Label Terrain Spots" tools. Ultimately I would like to include this information with other information as a live/dynamic label, like the 1st screenshot below. I need to do this in a 2D view.

As an example (see 2nd screenshot) - GEOPAK plan view labeler could EASILY be configured to show the station, offset, and tin elevation (or any other desire info) at any point, along any alignment, then placed as text (albeit not a live or dynamic label), in a 2D view.

Any help is appreciated.

Ask A Question I

Sat, 13 Nov 2021 00:56:21 GMT

Ask a question in a forum.

Labels - Check label association, Re-associate and Copy Labels

Nader Mostafa — Sat, 13 Nov 2021 14:53:52 GMT

Hello -

Is there a way to see what element a label is associated with? Is there a way to re-associate a label with a new piece of geometry after it has been placed? Is there a way to copy labels so I can keep the settings?

Modeling a cul-de-sac in Power GEOPAK V8i SS4.

Alez Mestas — Fri, 09 Feb 2018 18:32:29 GMT

Is there a way to model a cul-de-sac in Power GEOPAK V8i SS4? Does anyone have a process to do this? Thanks.

Changing the .ddb file for feature definitions

Richard Harris — Thu, 29 Dec 2016 14:04:24 GMT

How to change the "Active Link DDB"? I want to change the .ddb that is used for feature definitions. I want to change from DesignV8.ddb to Civil_Features_Imperial.ddb.