• RE: Transitions used in power rail track

    There is no way to create your own transition type. We are working on transition formulae documentation to include in OpenRail
  • RE: Design of reverse curve

    It depends on the elements you want to insert between the 2 straights. Probably you will have to use the Multiple Element Regression Analysis tool used as a Multiple Element Connection solver. Open the tool, select first element and last element (the…
  • RE: Leader Line at a speicifed angle in Plan

    Everything looks fine. But none of your preference is using 90.000^ but 270.000^ So is it the same XIN ? Be sure to type again in the filed and save the preference to eliminate any doubt concerning the value. An exact value 90.000 is returned only…
  • RE: Reports for left and right rail from centre line

    Hi Bala, I think the easiest way to report the left and the right rail from a centerline (incl. HAL, VAL and Cant) in BRT would be: - using "Geometry > View Geometry > Rails..." to generate the left and the right rail as graphics elements (complex chain…
  • RE: Template creation, End conditions

    You can do that similar to applying different slopes based on depth. Create two end conditions starting from the same point so they will not be created at the same time and will use defined priority. Then create the barriers and use those end conditions…
  • RE: How to use On alignment and Off alignment points to import horizontal alignment

    Hi, I found this explanation in the help. I think it could help you understand the process. Circle Center, Spiral Point of Intersection, Point of Intersection are Off Alignment point when the IP is not a connection between 2 straights or a point of discontinuity…
  • How to use On alignment and Off alignment points to import horizontal alignment

    Dear Designer When i'm trying to import horizontal alignment via" text import wizard" in step 4 , "Column Data format" drop down box appears . In which we can able to select the different types of attributes that PI can be assigned . In the list…
  • Cut and Fill quantities

    Dear All, In end area volume , how to get cut and fill quantities for individual components . For example , in the attached image how to calculate 1.Green component ( Style given : Blanket ) quantity in cut and fill 2.Yellow component ( Style…