https://communities.bentley.com/members/ffa49c2f_2d00_c553_2d00_4ea7_2d00_9d2b_2d00_523db9508197Adam Riley's recent activityen-USTelligent Community 12https://communities.bentley.com/products/rail_design/f/openrail-forum/241835/chainage-not-showing-on-winalc-export-ord-10-11-00-115Fri, 17 Feb 2023 11:16:55 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:4f961cbe-e8c9-4344-b04f-63da3fb6dbb0Adam Riley<p>Hi - hope someone can help, please. Now the XML export feature is fixed with chainage showing against the cant (thanks!!), I wanted to try out the WinALC export as we need to do this for producing geometry files for our tampers.</p> <p>I exported my design from MX in LandXML format, as usual, and imported into ORD 2022 R1 U11. That&#39;s all okay. I&#39;ve gone through the usual steps to re-add the cant and export the to WinALC (not Smart ALC, as I don&#39;t use this).&nbsp;This is where I&#39;m having some trouble.</p> <p>My steps:</p> <p>- I imported the LandXML file into ORD using the Import Geometry tool</p> <p>- Used the Speed Table function</p> <p>- Used the Create Cant on my centreline... and so far so good!</p> <p>- Time to use Export Geometry from the centreline alignment... and it seems to work using the Plasser and Theurer option! But when checking the export, I noticed a big problem.</p> <p>I can see the chainage is correct for my horizontal and vertical parts of the design when checking reports in ORD, and the same for the cant, but on the *.geo export, it all&nbsp;simply starts at 0m chainage and&nbsp;the end point is the extent of the job (in this case 1590m in length). It should be showing 269330m to&nbsp;270920m. Cant is actually okay, and all the elements lengths and transitions are okay... it&#39;s just problematic starting at 0m rather than the proper start point.</p> <p>Is this a similar issue to the old XML export problem, with a disconnect between the chainage of a design and the export?</p> <p>Any help would be fantastic, please. Thanks.</p><div style="clear:both;"></div>https://communities.bentley.com/products/rail_design/f/openrail-forum/237314/ord10-11-uk-country-kitSat, 22 Oct 2022 22:55:21 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:4e359409-7029-4206-b04c-9e6103844189Adam Riley<p>I have&nbsp;UKCountryKitU3 from Rob Nice back in 2018, but now I&#39;ve finally got hold of ORD10.11, I wondered if there was an updated UK Country Kit (to show transition, chainage, etc). Thanks.</p><div style="clear:both;"></div>https://communities.bentley.com/achievements/687f4b6d-e18a-4e55-836c-49926ca2c9d9Sun, 23 Oct 2022 00:44:32 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:ac87bd4f-2bc0-44d3-9e57-0644260314daAnswer a question that is verified as helpful or correct.https://communities.bentley.com/products/rail_design/f/openrail-forum/218788/chainage-not-showing-for-cant-on-my-xml-export-ord-10-08-01-33-or-10-10-01-03Mon, 30 Aug 2021 11:47:51 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:ad12492c-ae64-4501-b3c7-42cb822c7c9cAdam Riley<p>Hi - hope someone can help, please. I exported my design from MX in LandXML format, which I know from experience loses the cant. That&#39;s all okay, though. But I&#39;ve gone through the steps to add the cant and re-export the XML, but am having some trouble. It&#39;s quick and easy to import/tweak cant/re-export in BRT, but I really would like to get used to doing it in ORD.</p> <p>My steps:</p> <p>- I imported the LandXML file into ORD using the Import Geometry tool</p> <p>- Used the Speed Table function because I couldn&#39;t add cant without defining that (is this normal? It&#39;s not a step I&#39;ve needed to do when doing this process in BRT)</p> <p>- Used the Create Cant on my centreline... and so far so good!</p> <p>- Time to use Export Geometry... and it seem to work! But when checking the export, I noticed what seems like a problem.</p> <p>I can see the chainage is correct for my horizontal and vertical parts of the design, but the cant simply starts at 0m chainage (it&nbsp;should be 271670m start) and&nbsp;the end point is the extent of the job (in this case 1600m in length).</p> <p>Have I missed a step? Is there some disconnect between the chainage for the Hz/Vt and the chainage for the cant? If so, how can I tie them together? When I use the Cant Report tool, it shows the correct chainage, so I&#39;m a bit puzzled.</p> <p>Any help would be fantastic, please. Thanks.</p><div style="clear:both;"></div>https://communities.bentley.com/achievements/460ac7df-7ccc-4c42-a204-9e05eef3be09Mon, 30 Aug 2021 02:06:59 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:fc700b7b-c121-4628-9e5e-b1f5ab277b44Ask a question in a forum.https://communities.bentley.com/products/rail_design/f/openrail-forum/190143/moving-from-mx-rail-to-ordWed, 18 Dec 2019 12:07:51 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:48f609e6-55fe-489a-b072-c9a04e4efc84Adam Riley<p>Dear <a href="/members/d0295eea_2d00_a1d6_2d00_49c9_2d00_bda2_2d00_7736a53a0470">Kivanch</a>, I tried emailing you regarding this matter last year, but the files wouldn&#39;t attach and then I think the email in general must have just got lost somewhere along the way. Currently I&#39;m trying to make the move from &quot;MX V8 XM Edition, 08.09.05.18&quot; to ORD, and was hoping you could help with some of the process. These are the two main style sets we use in MX...</p> <p>Existing survey style set used.&nbsp;&quot;MfW Detail Survey.pss&quot; file contents:</p> <p><pre class="ui-code" data-mode="text"> Style Set Created by version 1 of the Style Set Editor on the 28/01/00 ================================================== Style Set Editor file: MfW Detail Survey ================================================== *** Manual alterations to this file are not advised! *** Global Options Start 000GLOBAL AUTOCAD LAYERNAME = 000GLOBAL MICROSTATION LEVEL NAME = 000GLOBAL MICROSTATION LEVEL NUMBER = 0 000805,1=1,4=0.300 000806,1=1 000808,4=0.180,5=3,6=1.000 000810 000812,1=MOSS,4=0.100 Global Options End String Naming Convention Feature | Partial Name | Subreference| String Type | AutoCAD Grouped Feature Layer Name | MicroStation Grouped Feature Level Name | MicroStation level Number | Default CAD Grouped Feature | ------------------------------------|---------------|-------------|-------------|------------------------------------|-----------------------------------------|---------------------------|-----------------------------| Start %0 Boundary Strings &#39;BO &#39; &#39;BDRY&#39; 2 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Circles (Scaled) &#39;CIR &#39; &#39;CIR &#39; 8 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Slope Signatures &#39;SS &#39; &#39;HACE&#39; 2 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Rectangles (Scaled) &#39;REC &#39; &#39;REC &#39; 8 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Survey Stations &#39;PSS &#39; &#39;SSTA&#39; 4 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Text Strings &#39;* &#39; &#39; &#39; 16384 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Buildings (Frontage) &#39;BF &#39; &#39; &#39; 2 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Buildings (General) &#39;BG &#39; &#39; &#39; 2 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Buildings (Solid-Sided Left) &#39;BLC &#39; &#39; &#39; 2 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Buildings (Open-Sided Left) &#39;BLO &#39; &#39; &#39; 2 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Buildings (Solid-Sided Right) &#39;BRC &#39; &#39; &#39; 2 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Buildings (Open-Sided Right) &#39;BRO &#39; &#39; &#39; 2 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Large Road Signs &#39;BSI &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Buildings (All) &#39;B &#39; &#39; &#39; 2 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Centrelines &#39;CC &#39; &#39; &#39; 2 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Carriageways/Channels &#39;C &#39; &#39; &#39; 2 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Ditches (Bottom) &#39;DB &#39; &#39; &#39; 2 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Ditches (Top) &#39;DT &#39; &#39; &#39; 2 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Ditches (All) &#39;D &#39; &#39; &#39; 2 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Earthworks (General) &#39;EG &#39; &#39; &#39; 2 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Embankments (Bottom) &#39;EMB &#39; &#39; &#39; 2 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Embankments (Top) &#39;EMT &#39; &#39; &#39; 2 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Fences (Secure) &#39;FS &#39; &#39; &#39; 2 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Fences (Open) &#39;F &#39; &#39; &#39; 2 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Gates &#39;G &#39; &#39; &#39; 2 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Hedges &#39;H &#39; &#39; &#39; 2 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Interfaces &#39;INT &#39; &#39; &#39; 2 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Irrigation Lines &#39;I &#39; &#39; &#39; 2 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Kerbs &#39;K &#39; &#39; &#39; 2 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Spot Levels &#39;L &#39; &#39; &#39; 2 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Overhead Details/Cables &#39;OVR &#39; &#39; &#39; 2 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Bracken &#39;PBA &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Conifer &#39;PCO &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Manhole Cover (Large Square) &#39;PCS &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Culverts &#39;PCU &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Deciduous Tree &#39;PDE &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Electricity Box (Pillar) &#39;PEB &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Electricity Cover (Large Round) &#39;PER &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Electricity Cover (Large Square) &#39;PES &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Fire Hydrant &#39;PFH &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Gas Cover (Large Round) &#39;PGR &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Gas Cover (Large Square) &#39;PGS &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Gullies &#39;PGU &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Gas Valve &#39;PGV &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Heathland &#39;PHT &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Large Inspection Chamber (Round) &#39;PIR &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Large Inspection Chamber(Square) &#39;PIS &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Marsh &#39;PMA &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Manhole Cover (Round) &#39;PMR &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Manhole Cover (Square) &#39;PMS &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Manhole Cover (Triangular) &#39;PMT &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; North Symbol (Patent) &#39;PNT &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Benchmarks (Ordnance Survey) &#39;POB &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Ordnance Survey Revision Point &#39;POR &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Osiers &#39;POS &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Trig Station (Ordnance Survey) &#39;POT &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Pylon &#39;PPY &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Orchard Symbol (Ordnance Survey) &#39;PRC &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Reeds &#39;PRE &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Grass (Rough) &#39;PRG &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Scrub &#39;PSC &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Bench Seats &#39;PSE &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Saltings &#39;PSL &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Stop Valve &#39;PSV &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Trees (Small) &#39;PT1 &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Trees (Medium) &#39;PT2 &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Trees (Large) &#39;PT3 &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Telecom Box (Pillar) &#39;PTB &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Benchmarks (Temporary) &#39;PTM &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Telecom Cover (Large Round) &#39;PTR &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Telecom Cover (Large Square) &#39;PTS &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Manhole Cover (Large Round) &#39;PUR &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Manhole Cover (Large Triangular) &#39;PUT &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Water Meter &#39;PWM &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Water Cover (Large Round) &#39;PWR &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Water Cover (Large Square) &#39;PWS &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Point Features (Other) &#39;P &#39; &#39; &#39; 65536 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Rails &#39;RA &#39; &#39; &#39; 2 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Stiles &#39;STY &#39; &#39; &#39; 2 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Shoulders &#39;S &#39; &#39; &#39; 2 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Verges Footpaths and Tracks &#39;V &#39; &#39; &#39; 2 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Walls (Low Left 0.1m - 0.5m) &#39;WAL &#39; &#39; &#39; 2 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Walls (Low Right 0.1m - 0.5m) &#39;WAR &#39; &#39; &#39; 2 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Walls (Retaining Left) &#39;WRL &#39; &#39; &#39; 2 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Walls (Retaining Right) &#39;WRR &#39; &#39; &#39; 2 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Contours (Normal) &#39;Y &#39; &#39; &#39; 1 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Contours (Prominent) &#39;Z &#39; &#39; &#39; 1 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; End %0 ------------------------------------|-------------- ================================================== Boundary Strings ================================================== Declare %1 2 - 019 019,BO,BDRY,4=6 019,4=-6 Options %2 817,,LIST 814,3=BOUN 805,1=2 810,DASH,5=-0.500,6=-0.500,8=-0.500,9=-0.500,7=0.000 825,2=DETA 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A001,4=-1 000001,&amp;A001&amp; 000859,7=0.000,10=0.000 000859,3=V002,4=1 000001,&amp;V002&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== Circles (Scaled) ================================================== Declare %1 2 - 019 019,CIR,CIR ,4=6 019,4=-6 Options %2 817,,LIST 814,3=CIRC 805 810,MACR,2=OBJCIRCL,5=-1 825 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A003,4=-1 000001,&amp;A003&amp; 000859,7=0.000,10=0.000 000859,3=V004,4=1 000001,&amp;V004&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== Slope Signatures ================================================== Declare %1 2 - 019 019,SS,HACE,4=6 019,4=-6 Options %2 817,,LIST 814,3=SLOP 805,1=1 810 825 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A005,4=-1 000001,&amp;A005&amp; 000859,7=0.000,10=0.000 000859,3=V006,4=1 000001,&amp;V006&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== Rectangles (Scaled) ================================================== Declare %1 2 - 019 019,REC,REC ,4=6 019,4=-6 Options %2 817,,LIST 814,3=RECT 805 810,MACR,2=OBJRECT,5=-1 825 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A007,4=-1 000001,&amp;A007&amp; 000859,7=0.000,10=0.000 000859,3=V008,4=1 000001,&amp;V008&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== Survey Stations ================================================== Declare %1 2 - 019 019,PSS,SSTA,4=6 019,4=-6 Options %2 817,,LIST 814,3=PSSA 805,1=2 806,1=2 810 825,2=DETA 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A009,4=-1 000001,&amp;A009&amp; 000859,7=0.000,10=0.000 000859,3=V00A,4=1 000001,&amp;V00A&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== Text Strings ================================================== Declare %1 1 - * Options %2 817,,LIST 814,3=TEXT 806 808,4=0.180 830 805 806 808,4=0.180 000810 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A00B,4=-1 000001,&amp;A00B&amp; 000859,7=0.000,10=0.000 000859,3=V00C,4=1 000001,&amp;V00C&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== Buildings (Frontage) ================================================== Declare %1 1 - BF Options %2 817,,LIST 814,3=BLDS 805,1=5 810,MACR,2=FRONTAGE,5=-1,6=-0.5 825 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A00D,4=-1 000001,&amp;A00D&amp; 000859,7=0.000,10=0.000 000859,3=V00E,4=1 000001,&amp;V00E&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== Buildings (General) ================================================== Declare %1 1 - BG Options %2 817,,LIST 814,3=BLDS 805,1=5 810 825 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A00F,4=-1 000001,&amp;A00F&amp; 000859,7=0.000,10=0.000 000859,3=V010,4=1 000001,&amp;V010&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== Buildings (Solid-Sided Left) ================================================== Declare %1 1 - BLC Options %2 817,,LIST 814,3=BLDS 805,1=5 810,MACR,2=BUILDNGL,5=-1,6=-0.1 825 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A011,4=-1 000001,&amp;A011&amp; 000859,7=0.000,10=0.000 000859,3=V012,4=1 000001,&amp;V012&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== Buildings (Open-Sided Left) ================================================== Declare %1 1 - BLO Options %2 817,,LIST 814,3=BLDS 805,1=5 810,MACR,2=OPNBLDGL,8=-8.000,6=-1.000 825 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A013,4=-1 000001,&amp;A013&amp; 000859,7=0.000,10=0.000 000859,3=V014,4=1 000001,&amp;V014&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== Buildings (Solid-Sided Right) ================================================== Declare %1 1 - BRC Options %2 817,,LIST 814,3=BLDS 805,1=5 810,MACR,2=BUILDNGR,5=-1,6=-0.1 825 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A015,4=-1 000001,&amp;A015&amp; 000859,7=0.000,10=0.000 000859,3=V016,4=1 000001,&amp;V016&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== Buildings (Open-Sided Right) ================================================== Declare %1 1 - BRO Options %2 817,,LIST 814,3=BLDS 805,1=5 810,MACR,2=BUILDNGR,8=-4.000,6=-1.000 825 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A017,4=-1 000001,&amp;A017&amp; 000859,7=0.000,10=0.000 000859,3=V018,4=1 000001,&amp;V018&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== Large Road Signs ================================================== Declare %1 1 - BSI Options %2 817,,LIST 814,3=BSIG 805 810,MACR,2=BIGSIGNS,8=-2.000 825 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A019,4=-1 000001,&amp;A019&amp; 000859,7=0.000,10=0.000 000859,3=V01A,4=1 000001,&amp;V01A&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== Buildings (All) ================================================== Declare %1 1 - B Options %2 817,,LIST 814,3=BLDS 805,1=5 810 825 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A01B,4=-1 000001,&amp;A01B&amp; 000859,7=0.000,10=0.000 000859,3=V01C,4=1 000001,&amp;V01C&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== Centrelines ================================================== Declare %1 1 - CC Options %2 817,,LIST 814,3=CCEN 805,1=2 810 825 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A01D,4=-1 000001,&amp;A01D&amp; 000859,7=0.000,10=0.000 000859,3=V01E,4=1 000001,&amp;V01E&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== Carriageways/Channels ================================================== Declare %1 1 - C Options %2 817,,LIST 814,3=CHAN 805,1=6 810 825 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A01F,4=-1 000001,&amp;A01F&amp; 000859,7=0.000,10=0.000 000859,3=V020,4=1 000001,&amp;V020&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== Ditches (Bottom) ================================================== Declare %1 1 - DB Options %2 817,,LIST 814,3=DTCH 805,1=9 810 825,2=DETA 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A021,4=-1 000001,&amp;A021&amp; 000859,7=0.000,10=0.000 000859,3=V022,4=1 000001,&amp;V022&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== Ditches (Top) ================================================== Declare %1 1 - DT Options %2 817,,LIST 814,3=DTCH 805,1=9 810 825,2=DETA 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A023,4=-1 000001,&amp;A023&amp; 000859,7=0.000,10=0.000 000859,3=V024,4=1 000001,&amp;V024&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== Ditches (All) ================================================== Declare %1 1 - D Options %2 817,,LIST 814,3=DTCH 805,1=9 810,DASH,5=2.000,6=0.500,8=0.500,9=0.500,7=0.000 825 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A025,4=-1 000001,&amp;A025&amp; 000859,7=0.000,10=0.000 000859,3=V026,4=1 000001,&amp;V026&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== Earthworks (General) ================================================== Declare %1 1 - EG Options %2 817,,LIST 814,3=EWRK 805,1=6 810 825 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A027,4=-1 000001,&amp;A027&amp; 000859,7=0.000,10=0.000 000859,3=V028,4=1 000001,&amp;V028&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== Embankments (Bottom) ================================================== Declare %1 1 - EMB Options %2 817,,LIST 814,3=EMBM 805 810 825 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A029,4=-1 000001,&amp;A029&amp; 000859,7=0.000,10=0.000 000859,3=V02A,4=1 000001,&amp;V02A&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== Embankments (Top) ================================================== Declare %1 1 - EMT Options %2 817,,LIST 814,3=EMBM 805 810 825 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A02B,4=-1 000001,&amp;A02B&amp; 000859,7=0.000,10=0.000 000859,3=V02C,4=1 000001,&amp;V02C&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== Fences (Secure) ================================================== Declare %1 1 - FS Options %2 817,,LIST 814,3=FENS 805,1=7 810,MACR,2=SECFENCE,8=-10.000,6=-1.000 825 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A02D,4=-1 000001,&amp;A02D&amp; 000859,7=0.000,10=0.000 000859,3=V02E,4=1 000001,&amp;V02E&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== Fences (Open) ================================================== Declare %1 1 - F Options %2 817,,LIST 814,3=FENO 805,1=7 810,MACR,2=OPNFENCE,8=-30.000,6=-1.000 825 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A02F,4=-1 000001,&amp;A02F&amp; 000859,7=0.000,10=0.000 000859,3=V030,4=1 000001,&amp;V030&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== Gates ================================================== Declare %1 1 - G Options %2 817,,LIST 814,3=GATE 805,1=7 810,MACR,2=GATESYMB,5=-2,6=-1 825 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A031,4=-1 000001,&amp;A031&amp; 000859,7=0.000,10=0.000 000859,3=V032,4=1 000001,&amp;V032&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== Hedges ================================================== Declare %1 1 - H Options %2 817,,LIST 814,3=HEDG 805,1=3 810,MACR,2=HEDGE,8=-10.000 825 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A033,4=-1 000001,&amp;A033&amp; 000859,7=0.000,10=0.000 000859,3=V034,4=1 000001,&amp;V034&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== Interfaces ================================================== Declare %1 1 - INT Options %2 817,,LIST 814,3=INTE 805,1=104 810,DASH,5=-0.500,6=-1.000,8=-1.500,9=-1.000,7=0.000 825 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A035,4=-1 000001,&amp;A035&amp; 000859,7=0.000,10=0.000 000859,3=V036,4=1 000001,&amp;V036&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== Irrigation Lines ================================================== Declare %1 1 - I Options %2 817,,LIST 814,3=IRRI 805,1=4 810 825 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A037,4=-1 000001,&amp;A037&amp; 000859,7=0.000,10=0.000 000859,3=V038,4=1 000001,&amp;V038&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== Kerbs ================================================== Declare %1 1 - K Options %2 817,,LIST 814,3=KERB 805,1=8 810 825 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A039,4=-1 000001,&amp;A039&amp; 000859,7=0.000,10=0.000 000859,3=V03A,4=1 000001,&amp;V03A&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== Spot Levels ================================================== Declare %1 1 - L Options %2 817,,LIST 814,3=SPOT 805 810 806 825,2=DETA 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A03B,4=-1 000001,&amp;A03B&amp; 000859,7=0.000,10=0.000 000859,3=V03C,4=1 000001,&amp;V03C&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== Overhead Details/Cables ================================================== Declare %1 1 - OVR Options %2 817,,LIST 814,3=OVRH 805 810,MACR,2=OVERHEAD,8=-36.000,6=-6.000 825 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A03D,4=-1 000001,&amp;A03D&amp; 000859,7=0.000,10=0.000 000859,3=V03E,4=1 000001,&amp;V03E&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== Bracken ================================================== Declare %1 1 - PBA Options %2 817,,LIST 814,3=PBAK 805,1=3 810 861,2=BRACKENS,4=0.500,7=0.500 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A03F,4=-1 000001,&amp;A03F&amp; 000859,7=0.000,10=0.000 000859,3=V040,4=1 000001,&amp;V040&amp; 000825 815 End Options %3 ================================================== Conifer ================================================== Declare %1 1 - PCO Options %2 817,,LIST 814,3=PCON 805,1=3 810 861,2=CONIFERS,4=0.500,7=0.500 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A041,4=-1 000001,&amp;A041&amp; 000859,7=0.000,10=0.000 000859,3=V042,4=1 000001,&amp;V042&amp; 000825 815 End Options %3 ================================================== Manhole Cover (Large Square) ================================================== Declare %1 1 - PCS Options %2 817,,LIST 814,3=PUCS 805 810 861,2=SQMHNOID,4=0.465,7=0.150 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A043,4=-1 000001,&amp;A043&amp; 000859,7=0.000,10=0.000 000859,3=V044,4=1 000001,&amp;V044&amp; 000825 815 End Options %3 ================================================== Culverts ================================================== Declare %1 1 - PCU Options %2 817,,LIST 814,3=DCUL 805,1=9 810,MACR,2=DIDRCULV,8=-18.000 825 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A045,4=-1 000001,&amp;A045&amp; 000859,7=0.000,10=0.000 000859,3=V046,4=1 000001,&amp;V046&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== Deciduous Tree ================================================== Declare %1 1 - PDE Options %2 817,,LIST 814,3=PDEC 805,1=3 810 861,2=DECIDUOS,4=0.500,7=0.500 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A047,4=-1 000001,&amp;A047&amp; 000859,7=0.000,10=0.000 000859,3=V048,4=1 000001,&amp;V048&amp; 000825 815 End Options %3 ================================================== Electricity Box (Pillar) ================================================== Declare %1 1 - PEB Options %2 817,,LIST 814,3=PEBP 805 810 861,2=ELECBOXP,4=0.375,7=0.150 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A049,4=-1 000001,&amp;A049&amp; 000859,7=0.000,10=0.000 000859,3=V04A,4=1 000001,&amp;V04A&amp; 000825 815 End Options %3 ================================================== Electricity Cover (Large Round) ================================================== Declare %1 1 - PER Options %2 817,,LIST 814,3=PECR 805 810 861,2=ROUNDECR,4=0.465,7=0.150 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A04B,4=-1 000001,&amp;A04B&amp; 000859,7=0.000,10=0.000 000859,3=V04C,4=1 000001,&amp;V04C&amp; 000825 815 End Options %3 ================================================== Electricity Cover (Large Square) ================================================== Declare %1 1 - PES Options %2 817,,LIST 814,3=PECS 805 810 861,2=SQUAREEC,4=0.465,7=0.150 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A04D,4=-1 000001,&amp;A04D&amp; 000859,7=0.000,10=0.000 000859,3=V04E,4=1 000001,&amp;V04E&amp; 000825 815 End Options %3 ================================================== Fire Hydrant ================================================== Declare %1 1 - PFH Options %2 817,,LIST 814,3=PFHY 805 810 861,2=FIREHYDR,4=0.375,7=0.150 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A04F,4=-1 000001,&amp;A04F&amp; 000859,7=0.000,10=0.000 000859,3=V050,4=1 000001,&amp;V050&amp; 000825 815 End Options %3 ================================================== Gas Cover (Large Round) ================================================== Declare %1 1 - PGR Options %2 817,,LIST 814,3=PGCR 805 810 861,2=ROUNDGCR,4=0.465,7=0.150 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A051,4=-1 000001,&amp;A051&amp; 000859,7=0.000,10=0.000 000859,3=V052,4=1 000001,&amp;V052&amp; 000825 815 End Options %3 ================================================== Gas Cover (Large Square) ================================================== Declare %1 1 - PGS Options %2 817,,LIST 814,3=PGCS 805 810 861,2=SQUAREGC,4=0.465,7=0.150 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A053,4=-1 000001,&amp;A053&amp; 000859,7=0.000,10=0.000 000859,3=V054,4=1 000001,&amp;V054&amp; 000825 815 End Options %3 ================================================== Gullies ================================================== Declare %1 1 - PGU Options %2 817,,LIST 814,3=GULY 805 810 861,2=GULLY,4=-0.450,10=0.000 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A055,4=-1 000001,&amp;A055&amp; 000859,7=0.000,10=0.000 000859,3=V056,4=1 000001,&amp;V056&amp; 000825 815 End Options %3 ================================================== Gas Valve ================================================== Declare %1 1 - PGV Options %2 817,,LIST 814,3=PGVL 805 810 861,2=GASVALVE,4=0.375,7=0.150 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A057,4=-1 000001,&amp;A057&amp; 000859,7=0.000,10=0.000 000859,3=V058,4=1 000001,&amp;V058&amp; 000825 815 End Options %3 ================================================== Heathland ================================================== Declare %1 1 - PHT Options %2 817,,LIST 814,3=PHTH 805,1=3 810 861,2=HETHLAND,4=0.500,7=0.500 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A059,4=-1 000001,&amp;A059&amp; 000859,7=0.000,10=0.000 000859,3=V05A,4=1 000001,&amp;V05A&amp; 000825 815 End Options %3 ================================================== Large Inspection Chamber (Round) ================================================== Declare %1 1 - PIR Options %2 817,,LIST 814,3=PICR 805 810 861,2=ROUNDICR,4=0.390,7=0.150 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A05B,4=-1 000001,&amp;A05B&amp; 000859,7=0.000,10=0.000 000859,3=V05C,4=1 000001,&amp;V05C&amp; 000825 815 End Options %3 ================================================== Large Inspection Chamber(Square) ================================================== Declare %1 1 - PIS Options %2 817,,LIST 814,3=PICS 805 810 861,2=SQUAREIC,4=0.390,7=0.150 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A05D,4=-1 000001,&amp;A05D&amp; 000859,7=0.000,10=0.000 000859,3=V05E,4=1 000001,&amp;V05E&amp; 000825 815 End Options %3 ================================================== Marsh ================================================== Declare %1 1 - PMA Options %2 817,,LIST 814,3=PMAR 805,1=3 810 861,2=MARSHSSS,4=0.500,7=0.500 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A05F,4=-1 000001,&amp;A05F&amp; 000859,7=0.000,10=0.000 000859,3=V060,4=1 000001,&amp;V060&amp; 000825 815 End Options %3 ================================================== Manhole Cover (Round) ================================================== Declare %1 1 - PMR Options %2 817,,LIST 814,3=PMHR 805 810 861,2=ROUNDMHL,4=0.465,7=0.150 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A061,4=-1 000001,&amp;A061&amp; 000859,7=0.000,10=0.000 000859,3=V062,4=1 000001,&amp;V062&amp; 000825 815 End Options %3 ================================================== Manhole Cover (Square) ================================================== Declare %1 1 - PMS Options %2 817,,LIST 814,3=PMHS 805 810 861,2=SQUAREMH,4=0.465,7=0.150 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A063,4=-1 000001,&amp;A063&amp; 000859,7=0.000,10=0.000 000859,3=V064,4=1 000001,&amp;V064&amp; 000825 815 End Options %3 ================================================== Manhole Cover (Triangular) ================================================== Declare %1 1 - PMT Options %2 817,,LIST 814,3=PMHT 805 810 861,2=TRIAGRMH,4=0.465,7=0.150 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A065,4=-1 000001,&amp;A065&amp; 000859,7=0.000,10=0.000 000859,3=V066,4=1 000001,&amp;V066&amp; 000825 815 End Options %3 ================================================== North Symbol (Patent) ================================================== Declare %1 1 - PNT Options %2 817,,LIST 814,3=PNTH 805 810 861,2=NORTHING,4=4.000,7=2.500 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A067,4=-1 000001,&amp;A067&amp; 000859,7=0.000,10=0.000 000859,3=V068,4=1 000001,&amp;V068&amp; 000825 815 End Options %3 ================================================== Benchmarks (Ordnance Survey) ================================================== Declare %1 1 - POB Options %2 817,,LIST 814,3=POBM 805 810 861,2=ORDSRVBM,4=0.300,7=0.300 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A069,4=-1 000001,&amp;A069&amp; 000859,7=0.000,10=0.000 000859,3=V06A,4=1 000001,&amp;V06A&amp; 000825 815 End Options %3 ================================================== Ordnance Survey Revision Point ================================================== Declare %1 1 - POR Options %2 817,,LIST 814,3=PORP 805 810 861,2=OSRVSNPT,4=0.300,7=0.300 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A06B,4=-1 000001,&amp;A06B&amp; 000859,7=0.000,10=0.000 000859,3=V06C,4=1 000001,&amp;V06C&amp; 000825 815 End Options %3 ================================================== Osiers ================================================== Declare %1 1 - POS Options %2 817,,LIST 814,3=POSI 805,1=3 810 861,2=POSIERSS,4=0.500,7=0.500 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A06D,4=-1 000001,&amp;A06D&amp; 000859,7=0.000,10=0.000 000859,3=V06E,4=1 000001,&amp;V06E&amp; 000825 815 End Options %3 ================================================== Trig Station (Ordnance Survey) ================================================== Declare %1 1 - POT Options %2 817,,LIST 814,3=POSN 805,1=1 810 861,2=OSTRGSTN,4=0.300,7=0.300 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A06F,4=-1 000001,&amp;A06F&amp; 000859,7=0.000,10=0.000 000859,3=V070,4=1 000001,&amp;V070&amp; 000825 815 End Options %3 ================================================== Pylon ================================================== Declare %1 1 - PPY Options %2 817,,LIST 814,3=PEPY 805 810 861,2=ELEPYLON,4=0.465,7=0.150 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A071,4=-1 000001,&amp;A071&amp; 000859,7=0.000,10=0.000 000859,3=V072,4=1 000001,&amp;V072&amp; 000825 815 End Options %3 ================================================== Orchard Symbol (Ordnance Survey) ================================================== Declare %1 1 - PRC Options %2 817,,LIST 814,3=PRCH 805,1=3 810 861,2=ORCHARDS,4=0.500,7=0.500 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A073,4=-1 000001,&amp;A073&amp; 000859,7=0.000,10=0.000 000859,3=V074,4=1 000001,&amp;V074&amp; 000825 815 End Options %3 ================================================== Reeds ================================================== Declare %1 1 - PRE Options %2 817,,LIST 814,3=PRED 805,1=3 810 861,2=REEDSSSS,4=0.500,7=0.500 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A075,4=-1 000001,&amp;A075&amp; 000859,7=0.000,10=0.000 000859,3=V076,4=1 000001,&amp;V076&amp; 000825 815 End Options %3 ================================================== Grass (Rough) ================================================== Declare %1 1 - PRG Options %2 817,,LIST 814,3=PGRS 805,1=3 810 861,2=RUGHGRAS,4=0.500,7=0.500 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A077,4=-1 000001,&amp;A077&amp; 000859,7=0.000,10=0.000 000859,3=V078,4=1 000001,&amp;V078&amp; 000825 815 End Options %3 ================================================== Scrub ================================================== Declare %1 1 - PSC Options %2 817,,LIST 814,3=PSCR 805,1=3 810 861,2=SCRUBSSS,4=0.500,7=0.500 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A079,4=-1 000001,&amp;A079&amp; 000859,7=0.000,10=0.000 000859,3=V07A,4=1 000001,&amp;V07A&amp; 000825 815 End Options %3 ================================================== Bench Seats ================================================== Declare %1 1 - PSE Options %2 817,,LIST 814,3=PSET 805 810 861,2=SEATSYMB,4=0.700,7=0.265 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A07B,4=-1 000001,&amp;A07B&amp; 000859,7=0.000,10=0.000 000859,3=V07C,4=1 000001,&amp;V07C&amp; 000825 815 End Options %3 ================================================== Saltings ================================================== Declare %1 1 - PSL Options %2 817,,LIST 814,3=PSLT 805,1=3 810 861,2=SALTINGS,4=0.500,7=0.500 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A07D,4=-1 000001,&amp;A07D&amp; 000859,7=0.000,10=0.000 000859,3=V07E,4=1 000001,&amp;V07E&amp; 000825 815 End Options %3 ================================================== Stop Valve ================================================== Declare %1 1 - PSV Options %2 817,,LIST 814,3=SVLV 805,1=1 810 861,2=STOPVALV,4=0.375,7=0.150 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A07F,4=-1 000001,&amp;A07F&amp; 000859,7=0.000,10=0.000 000859,3=V080,4=1 000001,&amp;V080&amp; 000825 815 End Options %3 ================================================== Trees (Small) ================================================== Declare %1 1 - PT1 Options %2 817,,LIST 814,3=PTR1 805,1=3 810 861,2=TREESYMB,4=0.800,7=0.800 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A081,4=-1 000001,&amp;A081&amp; 000859,7=0.000,10=0.000 000859,3=V082,4=1 000001,&amp;V082&amp; 000825 815 End Options %3 ================================================== Trees (Medium) ================================================== Declare %1 1 - PT2 Options %2 817,,LIST 814,3=PTR2 805,1=3 810 861,2=TREESYMB,4=1.400,7=1.400 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A083,4=-1 000001,&amp;A083&amp; 000859,7=0.000,10=0.000 000859,3=V084,4=1 000001,&amp;V084&amp; 000825 815 End Options %3 ================================================== Trees (Large) ================================================== Declare %1 1 - PT3 Options %2 817,,LIST 814,3=PTR3 805,1=3 810 861,2=TREESYMB,4=2.000,7=2.000 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A085,4=-1 000001,&amp;A085&amp; 000859,7=0.000,10=0.000 000859,3=V086,4=1 000001,&amp;V086&amp; 000825 815 End Options %3 ================================================== Telecom Box (Pillar) ================================================== Declare %1 1 - PTB Options %2 817,,LIST 814,3=PTBX 805 810 861,2=TELECBOX,4=0.390,7=0.150 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A087,4=-1 000001,&amp;A087&amp; 000859,7=0.000,10=0.000 000859,3=V088,4=1 000001,&amp;V088&amp; 000825 815 End Options %3 ================================================== Benchmarks (Temporary) ================================================== Declare %1 1 - PTM Options %2 817,,LIST 814,3=PTBM 805 810 861,2=TBMSYMB,4=0.875,7=0.275 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A089,4=-1 000001,&amp;A089&amp; 000859,7=0.000,10=0.000 000859,3=V08A,4=1 000001,&amp;V08A&amp; 000825 815 End Options %3 ================================================== Telecom Cover (Large Round) ================================================== Declare %1 1 - PTR Options %2 817,,LIST 814,3=PTCR 805 810 861,2=ROUNDTCR,4=0.465,7=0.150 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A08B,4=-1 000001,&amp;A08B&amp; 000859,7=0.000,10=0.000 000859,3=V08C,4=1 000001,&amp;V08C&amp; 000825 815 End Options %3 ================================================== Telecom Cover (Large Square) ================================================== Declare %1 1 - PTS Options %2 817,,LIST 814,3=PTCS 805 810 861,2=SQUARETC,4=0.465,7=0.150 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A08D,4=-1 000001,&amp;A08D&amp; 000859,7=0.000,10=0.000 000859,3=V08E,4=1 000001,&amp;V08E&amp; 000825 815 End Options %3 ================================================== Manhole Cover (Large Round) ================================================== Declare %1 1 - PUR Options %2 817,,LIST 814,3=PMHS 805 810 861,2=ROUNDMHL,4=0.465,7=0.150 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A08F,4=-1 000001,&amp;A08F&amp; 000859,7=0.000,10=0.000 000859,3=V090,4=1 000001,&amp;V090&amp; 000825 815 End Options %3 ================================================== Manhole Cover (Large Triangular) ================================================== Declare %1 1 - PUT Options %2 817,,LIST 814,3=PUCT 805 810 861,2=TRMHNOID,4=0.465,7=0.150 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A091,4=-1 000001,&amp;A091&amp; 000859,7=0.000,10=0.000 000859,3=V092,4=1 000001,&amp;V092&amp; 000825 815 End Options %3 ================================================== Water Meter ================================================== Declare %1 1 - PWM Options %2 817,,LIST 814,3=PWMR 805 810 861,2=WATERMTR,4=0.390,7=0.150 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A093,4=-1 000001,&amp;A093&amp; 000859,7=0.000,10=0.000 000859,3=V094,4=1 000001,&amp;V094&amp; 000825 815 End Options %3 ================================================== Water Cover (Large Round) ================================================== Declare %1 1 - PWR Options %2 817,,LIST 814,3=PWCR 805 810 861,2=ROUNDWCR,4=0.465,7=0.150 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A095,4=-1 000001,&amp;A095&amp; 000859,7=0.000,10=0.000 000859,3=V096,4=1 000001,&amp;V096&amp; 000825 815 End Options %3 ================================================== Water Cover (Large Square) ================================================== Declare %1 1 - PWS Options %2 817,,LIST 814,3=PWCS 805 810 861,2=SQUAREWC,4=0.465,7=0.150 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A097,4=-1 000001,&amp;A097&amp; 000859,7=0.000,10=0.000 000859,3=V098,4=1 000001,&amp;V098&amp; 000825 815 End Options %3 ================================================== Point Features (Other) ================================================== Declare %1 1 - P Options %2 817,,LIST 814,3=PONT 805 806 825,2=DETA 805 806 808,4=0.180 000810 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A099,4=-1 000001,&amp;A099&amp; 000859,7=0.000,10=0.000 000859,3=V09A,4=1 000001,&amp;V09A&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== Rails ================================================== Declare %1 1 - RA Options %2 817,,LIST 814,3=RAIL 805 810 825 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A09B,4=-1 000001,&amp;A09B&amp; 000859,7=0.000,10=0.000 000859,3=V09C,4=1 000001,&amp;V09C&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== Stiles ================================================== Declare %1 1 - STY Options %2 817,,LIST 814,3=STYL 805 810,MACR,2=STILESYM,8=-10.000,6=-3.000 825 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A09D,4=-1 000001,&amp;A09D&amp; 000859,7=0.000,10=0.000 000859,3=V09E,4=1 000001,&amp;V09E&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== Shoulders ================================================== Declare %1 1 - S Options %2 817,,LIST 814,3=SHDR 805,1=9 810 825 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A09F,4=-1 000001,&amp;A09F&amp; 000859,7=0.000,10=0.000 000859,3=V0A0,4=1 000001,&amp;V0A0&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== Verges Footpaths and Tracks ================================================== Declare %1 1 - V Options %2 817,,LIST 814,3=VERG 805,1=9 810,MACR,2=VRGFPTRK,8=-12.000 825 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A0A1,4=-1 000001,&amp;A0A1&amp; 000859,7=0.000,10=0.000 000859,3=V0A2,4=1 000001,&amp;V0A2&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== Walls (Low Left 0.1m - 0.5m) ================================================== Declare %1 1 - WAL Options %2 817,,LIST 814,3=WALL 805,1=2 810,MACR,2=LOWWALLL,8=-5.000,6=-0.500 825 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A0A3,4=-1 000001,&amp;A0A3&amp; 000859,7=0.000,10=0.000 000859,3=V0A4,4=1 000001,&amp;V0A4&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== Walls (Low Right 0.1m - 0.5m) ================================================== Declare %1 1 - WAR Options %2 817,,LIST 814,3=WALL 805,1=2 810,MACR,2=LOWWALLR,8=-5.000,6=-0.500 825 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A0A5,4=-1 000001,&amp;A0A5&amp; 000859,7=0.000,10=0.000 000859,3=V0A6,4=1 000001,&amp;V0A6&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== Walls (Retaining Left) ================================================== Declare %1 1 - WRL Options %2 817,,LIST 814,3=WALL 805,1=2 810,MACR,2=RETWALLL,8=-10.000,6=-1.000 825 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A0A7,4=-1 000001,&amp;A0A7&amp; 000859,7=0.000,10=0.000 000859,3=V0A8,4=1 000001,&amp;V0A8&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== Walls (Retaining Right) ================================================== Declare %1 1 - WRR Options %2 817,,LIST 814,3=WALL 805,1=2 810,MACR,2=RETWALLR,8=-10.000,6=-1.000 825 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A0A9,4=-1 000001,&amp;A0A9&amp; 000859,7=0.000,10=0.000 000859,3=V0AA,4=1 000001,&amp;V0AA&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== Contours (Normal) ================================================== Declare %1 1 - Y Options %2 817,,LIST 814,3=CONN 805,1=7 810 825 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A0AB,4=-1 000001,&amp;A0AB&amp; 000859,7=0.000,10=0.000 000859,3=V0AC,4=1 000001,&amp;V0AC&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== Contours (Prominent) ================================================== Declare %1 1 - Z Options %2 817,,LIST 814,3=CONI 805,1=8 810 825 805 806 808,4=0.180 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A0AD,4=-1 000001,&amp;A0AD&amp; 000859,7=0.000,10=0.000 000859,3=V0AE,4=1 000001,&amp;V0AE&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 </pre></p> <p></p> <p>Through Alignment Design (TAD) style set used.&nbsp;&quot;MXRAIL track 5001.3.pss&quot; file contents:</p> <p><pre class="ui-code" data-mode="text"> Style Set Created by version 1 of the Style Set Editor on the 02/10/2000 ================================================== Style Set Editor file: MXRAIL track 5001 ================================================== *** Manual alterations to this file are not advised! *** Global Options Start 000GLOBAL AUTOCAD LAYERNAME = 000GLOBAL MICROSTATION LEVEL NAME = 000GLOBAL MICROSTATION LEVEL NUMBER = 0 000805,1=1,4=0.300 000806,1=1 000808,4=0.180,5=3,6=1.000 000810 000812,1=MOSS,4=0.100 Global Options End String Naming Convention Feature | Partial Name | Subreference| String Type | AutoCAD Grouped Feature Layer Name | MicroStation Grouped Feature Level Name | MicroStation level Number | Default CAD Grouped Feature | ------------------------------------|---------------|-------------|-------------|------------------------------------|-----------------------------------------|---------------------------|-----------------------------| Start %0 SandC Text &#39;*T &#39; &#39; &#39; 16384 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Cant Details &#39;C &#39; &#39; &#39; 2 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Track Centrelines (Geometry) &#39;GC &#39; &#39; &#39; 4096 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; SandC Centrelines (Geometry) &#39;GT &#39; &#39; &#39; 4096 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; SandC IP Lines (Geometry) &#39;GU &#39; &#39; &#39; 4096 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Track Centre Lines &#39;MC &#39; &#39; &#39; 64 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; SandC Centre Lines &#39;MT &#39; &#39; &#39; 64 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; SandC IP Lines &#39;MU &#39; &#39; &#39; 64 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; Rails &#39;R &#39; &#39; &#39; 2 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; SandC IP Tick &#39;TI &#39; &#39; &#39; 2 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; SandC Nose Tick &#39;TN &#39; &#39; &#39; 2 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; SandC Toe Lines &#39;TT &#39; &#39; &#39; 2 &#39;&#39; &#39;&#39; &#39;0&#39; &#39;False&#39; End %0 ------------------------------------|-------------- ================================================== SandC Text ================================================== Declare %1 1 - *T Options %2 817,,LIST 814,3=STXT 805,1=3,4=0.010 806,1=3 810 830,7=0.050 805 806 808,4=0.180 810 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A001,4=-1 000001,&amp;A001&amp; 000859,7=0.000,10=0.000 000859,3=V002,4=1 000001,&amp;V002&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== Cant Details ================================================== Declare %1 1 - C Options %2 817,,LIST 814,3=CANT 805,1=1 810 806,1=1 808,4=0.180 000812,1=MOSS,4=0.100 000825 000858,2=D001 000858,3=A003,4=-1 000001,&amp;A003&amp; 000859,2=D002,7=0.000,10=0.000 000859,3=V004,4=-11 000001,&amp;V004&amp; 000860,4=0.100 000812,1=OFF 815 End Options %3 ================================================== Track Centrelines (Geometry) ================================================== Declare %1 1 - GC Options %2 817,,LIST 814,3=GEOM 805,1=3 810 806 808,4=0.180 809,1=HTPS,2=ONES,9=0.000 861,2=IADSYMB1,4=-1.000 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A005,4=-1 000001,&amp;A005&amp; 000859,7=0.000,10=0.000 000859,3=V006,4=1 000001,&amp;V006&amp; 000825 815 End Options %3 ================================================== SandC Centrelines (Geometry) ================================================== Declare %1 1 - GT Options %2 817,,LIST 814,3=GEOM 805,1=3 810 806 808,4=0.180 809,1=HTPS,2=ONES,9=0.000 861,2=IADSYMB1,4=-1.000 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A007,4=-1 000001,&amp;A007&amp; 000859,7=0.000,10=0.000 000859,3=V008,4=1 000001,&amp;V008&amp; 000825 815 End Options %3 ================================================== SandC IP Lines (Geometry) ================================================== Declare %1 1 - GU Options %2 817,,LIST 814,3=GEOM 805,1=2 810 806 808,4=0.180 000812,1=MOSS,4=0.100 000825 809,1=HIPS,2=ONES,9=0.000 000866,7=1.000 000869,4=-25 863,2=1,4=1.000 000812,1=OFF 815 End Options %3 ================================================== Track Centre Lines ================================================== Declare %1 1 - MC Options %2 817,,LIST 814,3=MTRK 805,1=2,4=0.010 806,1=2 810 825,2=DETA,7=100.000 808,4=0.100,5=1,6=0.700 810 805 806 808,4=0.180 810 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A009,4=-1 000001,&amp;A009&amp; 000859,7=0.000,10=0.000 000859,3=V00A,4=1 000001,&amp;V00A&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== SandC Centre Lines ================================================== Declare %1 1 - MT Options %2 817,,LIST 814,3=MTRK 805,1=2,4=0.010 810 825 805 806 808,4=0.180 810 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A00B,4=-1 000001,&amp;A00B&amp; 000859,7=0.000,10=0.000 000859,3=V00C,4=1 000001,&amp;V00C&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== SandC IP Lines ================================================== Declare %1 1 - MU Options %2 817,,LIST 814,3=MAST 805,1=2 810 806,1=2 808,4=0.180 000812,1=MOSS,4=0.100 000825 000866,7=1.000,10=100.000 000869,4=-11 000860,4=0.100 000812,1=OFF 815 End Options %3 ================================================== Rails ================================================== Declare %1 1 - R Options %2 817,,LIST 814,3=RAIL 805,1=6,4=0.010 810 825 805 806 808,4=0.180 810 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A00D,4=-1 000001,&amp;A00D&amp; 000859,7=0.000,10=0.000 000859,3=V00E,4=1 000001,&amp;V00E&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== SandC IP Tick ================================================== Declare %1 1 - TI Options %2 817,,LIST 814,3=SIPT 805,1=6,4=0.010 810 825 805 806 808,4=0.180 810 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A00F,4=-1 000001,&amp;A00F&amp; 000859,7=0.000,10=0.000 000859,3=V010,4=1 000001,&amp;V010&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== SandC Nose Tick ================================================== Declare %1 1 - TN Options %2 817,,LIST 814,3=SNST 805,1=6,4=0.010 810 825 805 806 808,4=0.180 810 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A011,4=-1 000001,&amp;A011&amp; 000859,7=0.000,10=0.000 000859,3=V012,4=1 000001,&amp;V012&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 ================================================== SandC Toe Lines ================================================== Declare %1 1 - TT Options %2 817,,LIST 814,3=STOE 805,1=6,4=0.010 810 825 805 806 808,4=0.180 810 000812,1=MOSS,4=0.100 000858,7=0.000 000858,3=A013,4=-1 000001,&amp;A013&amp; 000859,7=0.000,10=0.000 000859,3=V014,4=1 000001,&amp;V014&amp; 000861,2=MXMACRO,4=1.000,7=1.000,10=0.000 815 End Options %3 </pre></p> <p></p> <p>The &quot;MXRAIL track 5001.3.pss&quot; is used for both our TAD files, as well as for the actual designs produced. Is it possible to use the MX *.pss files in ORD, or is there some equivalent files that can be produced, or a conversion process? Currently, if I try to import a TAD GENIO file, for instance, it doesn&#39;t display the green &quot;dumb-bells&quot; as expected, instead displaying them&nbsp;as a series of points connected together. Here&#39;s how it should look when imported (in ORD those dumb-bells wouldn&#39;t be showing by default, instead creating random lines stretching across left, right and centre lines):</p> <p></p> <p><img alt=" " src="/resized-image/__size/500x320/__key/communityserver-discussions-components-files/5921/TAD-in-MX-using-Track-5001.3.pss-Display-Setting.png" /></p> <p>Any help would be much appreciated.</p> <p></p> <p>There is also the matter of the pre-set preferences file NR uses: &quot;UK_metric.+prm&quot; - is this something that is incorporated already in ORD, or is it something that can be added in?</p> <p><pre class="ui-code" data-mode="text">* Version=08050000 * Do not edit this line * * * ============================================================================== * * PARAMETER FILE * -------------- * THIS IS A DATA FILE WHICH HOLDS THE USER-CHANGEABLE SYSTEM DEFAULTS FOR * MOSS. * * ============================================================================== * * * FILE FORMAT * ----------- * * A) ANY DATA FOLLOWING AN ASTERISK &#39;*&#39; IS DESIGNATED A COMMENT * AND IS IGNORED. * * * B) EACH LINE OF DATA MUST BEGIN WITH A KEYWORD, WHICH MUST CONTAIN * 8 CHARACTERS AND BEGIN IN COLUMN 1. * * C) A KEYWORD MUST BE IMMEDIATELY FOLLOWED BY AN EQUALS SIGN &#39;=&#39;. * THERE MUST BE NO SPACES BETWEEN THE KEYWORD AND THE EQUALS SIGN. * * * D) THE EQUALS SIGN MUST BE IMMEDIATELY FOLLOWED BY THE VALUE TO BE * ASSIGNED TO THE SYSTEM PARAMETER. THERE MUST BE NO SPACES * BETWEEN THE EQUALS SIGN AND THE VALUE. THE VALUE CAN BE REAL, * INTEGER OR CHARACTER, BUT IT MUST BE OF THE SAME TYPE AS THE * EXISTING PARAMETER. * * * E) WHEN CHARACTER VALUES ARE USED THEY ARE ASSUMED TO BE 8 * CHARACTERS IN LENGTH. IF THE VALUE IS SHORTER THAN 8 CHARACTERS * IT MUST BE PADDED OUT TO 8 CHARACTERS USING BLANKS. * * * * F) FOR TRANSLATION PURPOSES. INSERT A * IN COLUMN 9 FOR EVERY 5 OR * SO LINES OF CONTINUOUS COMMENTS * * ============================================================================== * PARAMETERS FOR METRIC/IMPERIAL CONVERSIONS * ------------------------------------------ * ****************************************************************** * THESE PARAMETERS MUST PRECEDE ANY OTHER PARAMETERS WHICH ARE INPUT * IN METRIC OR IMPERIAL DISTANCES * ****************************************************************** * METR_IMP=1.0 * UNITS OF LINEAR MEASURE : 1.0=METRIC , 0.3048=IMPERIAL. * MET2IMP2=1.0 * IMPERIAL/METRIC CONVERSION FACTOR(USED IN DRAW) * 1.0 -METRIC * 2.54-IMPERIAL * (CAN BE SET BY KODE18) * * SYSTEM PARAMETERS * ----------------- * * LINEPAGE=60 * NUMBER OF LINES PER PAGE. * MUST BE &gt; 5 * OR -1 TO TURN PAGING OFF * BANNEROP=1 * MOSS BANNER OUTPUT SWITCH * 0 - NO BANNER OUTPUT * 1 - BANNER OUTPUT (DEFAULT) * LGSWITCH=1 * LOGGING FILE SWITCH * 0 - NO LOG OF INPUT PRODUCED * 1 - LOG OF INPUT PRODUCED ON MOSSV92INP.LOG * LGIGSWCH=2 * LOGGING FILE SWITCH(IMOSS CURSOR HITS) * 0 - NO LOG OF INPUT PRODUCED * 1 - LOG OF INPUT PRODUCED ON MOSSV92IGM.LOG * 2 - LOG OF INPUT BUT NO ARCHIVE. * TRIAPRNT=1000 * MIN. NUMBER OF POINTS FOR TRIANGLE TRACE * MUST BE &gt;1 * READINFO=00 * NUMBER OF TIMES README FILE MESSAGE IS INVOKED * * MODELIST=2 * MODEL LIST SORT ORDER * 0 - AS STORED ON MODEL FILE * 1 - ALPHABETICAL SORT * 2 - DATE LAST USED IN REVERSE (DEFAULT) * * UNIT PARAMETERS * --------------- * * IN_ANGLE=0 * EXPECTED ANGULAR MEASURE INPUT UNITS. * THIS VALUE CAN BE MODIFIED DURING EXECUTION WITH 017 * 0 = DEG MIN SEC FOR MOST OPTIONS,DEG AND DEC FOR SOME * 1 = DEGREES MINUTES AND SECONDS THROUGHOUT * 2 = GRADS * 3 = DEGREES AND DECIMAL DEGREES * 4 = RADIANS * 5 = QUADRANT BEARINGS * OUT_ANGL=0 * EXPECTED ANGULAR MEASURE OUTPUT UNITS. * THIS VALUE CAN BE MODIFIED DURING EXECUTION WITH 017 * 0 = DEG MIN SEC FOR MOST OPTIONS,DEG AND DEC FOR SOME * 1 = DEGREES MINUTES AND SECONDS THROUGHOUT * (IF QUAD_BER=1 THEN BEARINGS ARE OUTPUT IN * QUAD. BEARINGS) * 2 = GRADS * 3 = DEGREES AND DECIMAL DEGREES * 4 = RADIANS * QUAD_BER=0 * INDICATOR FOR QUADRANT BEARING ANGULAR MEASURE OUTPUT. * THIS VALUES CAN BE MODIFIED DURING EXECUTION WITH 017 * 0 = NO QUADRANT BEARINGS REQUIRED * 1 = QUADRANT BERINGS REQUIRED * (IF THIS IS SET TO 1 THEN SET OUT_ANGL = 1) * YXORD_IN=0 * INDICATOR FOR USA COORDINATE NOTATION FOR INPUT DATA. * THIS VALUE CAN BE MODIFIED DURING EXECUTION WITH 017 * 0 = BRITISH,DANISH AND CZECH2 NOTATION * 1 = USA,CZECH1,FAR EAST NOTATION * YXORDOUT=0 * INDICATOR FOR USA COORDINATE NOTATION FOR OUTPUT DATA. * THIS VALUE CAN BE MODIFIED DURING EXECUTION WITH 017 * 0 = BRITISH NOTATION X/Y - EG. EASTING THEN NORTHING * 1 = USA NOTATION Y/X _ EG. NORTHING THEN EASTING * 2 = DANISH NOTATION Y/X _ EG. NORTHING THEN WESTING * 3 = CZECH1 NOTATION X/Y _ EG. SOUTHING THEN WESTING * 4 = CZECH2 NOTATION Y/X _ EG. WESTING THEN SOUTHING * 5 = FAR EAST NOTATION X/Y _ EG. NORTHING THEN EASTING * X_OSHIFT=0.0 * VALUE NEEDED TO BE ADDED TO NEGATIVE X COORDINATES * TO ENSURE ALL POSITIVE VALUES INTERNALLY * TYPICAL EXAMPLE 10000000.0 * Y_OSHIFT=0.0 * VALUE NEEDED TO BE ADDED TO NEGATIVE Y COORDINATES * TO ENSURE ALL POSITIVE VALUES INTERNALLY * TYPICAL EXAMPLE 10000000.0 * * ADDITIONAL OPTION 017 PARAMETERS * -------------------------------- * CURVEFIT=1 * CURVE FITTING INDICATOR * 0 - CURVE FITTING OFF * 1 - CURVE FITTING ON (DEFAULT) * TRIAECHO=0 * TRIANGLE ECHO ERROR * 0 - NO ECHO (DEFAULT) * 1 - NORMAL ECHO * 2 - DOUBLE ECHO * FLATTRIA=1 * ALLOW/BAN PRODUCTION OF FLAT TRIANGLES * O - DISALLOW FLAT TRIANGLES * 1 - ALLOW FLAT TRIANGLES (DEFAULT) * NVOFFSET=0 * SELECT NORMAL OR VERTICAL OFFSETS WITHIN * DESIGN OPTIONS THAT ALLOW NORMAL OFFSETS * 0 - USE VERTICAL OFFSETS * 1 - USE NORMAL OFFSETS * SSTATLAB=PSSA * SURVEY STATION STRING LABEL * SINTTOLE=20.0 * SECONDARY INTERPOLATION TOLERANCE * POINTTOL=0.01 * POINT SEARCH TOLERANCE * SECTOFFL=-100.0 * LEFT SECTION OFFSET * SECTOFFR=100.0 * RIGHT SECTION OFFSET * BASEBEAR=0.0 * SECTION BASELINE BEARING * (SEE IN_ANGLE FOR UNITS = DECIMAL DEGREES) * SINTOFFS=20.0 * SECONDARY INTERPOLATION OFFSET * * DESIGN PARAMETERS * ----------------- * AHDETOLR=0.100 * Default Chord-to-Arc tolerance * The chord-to-arc tolerance parameter only affects the * addition of points to the design / survey (202) ; it has NO * effect on the drawing. * MRSWITCH=1 * RADIUS/M-VALUE SWITCH(USED IN VALGN)-FRENCH REQUIREMENT. * 0 - M-VALUE USED WITHIN VALGN * 1 - RADIUS USED WITHIN VALGN * 2 - K-VALUE USED WITHIN VALGN * RLADEFLT=0 * DEFAULT VALUE FOR TRANSITION USAGE (RL/A). USED IN * HALGN AND DRAW. * 0 - RL * 1 - A * FDESWTCH=0 * FRENCH DESIGN 133 SWITCH - FRENCH REQUIREMENT. * 0 - DESIGN 133 USES ENGLISH RULES * 1 - DESIGN 133 USES FRENCH RULES * CUBIFACT=0 * METHOD OF CUBIC TRANSITION CURVE CALCULATION * 0 - WITHOUT FACTOR ADDED * 1 - WITH FACTOR ADDED AND ENHANCED CURVE TO * CURVE CUBIC THEORY * 3 - WITH NSW FACTOR ADDED * SEE USER MANUAL FOR DETAILS OF CUBIC FORMULA * CUBILENG=0 * INPUT DEFINITION CUBIC TRANSITION LENGTH * 0 - CURVE lENGTH * 1 - TANGENT lENGTH * SEE USER MANUAL FOR DETAILS OF * CUBIC TRANSITION LENGTH CALCULATION * TRANLENG=1 * INPUT DEFINITION CURVE TO CURVE SAME HAND * TRANSITION LENGTH * 0 - SPECIFIED LENGTH TO TRANSITION ORIGIN * 1 - SPECIFIED LENGTH IS ACTUAL LENGTH * *=============================================================================== * * PLOTTER PARAMETERS. * ------------------- * *PEN COLOURS REMOVED TO DRCOLOURS FILE * INIMV_X1=0.0 * THESE THREE VALUES DETERMINE THE INITIAL PEN MOVE. INIMV_Y1=0.0 * THEY ARE USED THUS: CALL PLOT(X1,Y1,3) INIMV_Y2=0.0 * + CALL PLOT(X1,Y2,-3) * SET THE THREE VALUES TO 0.0 IF YOU DON&#39;T WANT AN * INITIAL PEN MOVE * SET THE THREE VALUES AS FOLLOWS TO MOVE THE PEN * TO RIGHT HAND SIDE FOR A DRUM PLOTTER * INIMV_X1=10.0 * INIMV_Y1=-75.0 * INIMV_Y2=-70.0 * ARSWITCH=0 * EXTENDED .PIC FILE FUNCTIONALLITY. * 0 - NOT EXTENDED * 1 - EXTENDED * PICOORDS=1.0 * UNITS IN WHICH COORDINATES ARE HELD ON THE PICTURE FILE. * 1.0 - CENTIMETRES. * 0.3937009 - INCHES. * CHARATIO=100 * CHARACTER WIDTH/HEIGHT RATIO*100. IF YOUR INSTALLATION&#39;S * SUBROUTINE SYMBOL ALLOWS TEXT TO BE CONTINUED WITH * THE X=999.0,Y=999.0 FACILITY, USE VALUE -1. * * *=============================================================================== * * DRAW PARAMETERS. * ---------------- * DPAPORIN=1 * SHEET ORIENTATION : 1 = LANDSCAPE * : 2 = PORTRAIT * DPAPTYPE=0 * PAPER TYPE (800) : 0 = INTERACTIVE * : 1 = PLOTTER * DEFPAGLN=84.1 * DEFAULT PAGE LENGTH (800) : +VE REAL NO. * : (EG. &#39;A1&#39; LENGTH = 84.1) * DEFPAGWD=59.4 * DEFAULT PAGE WIDTH (800) : +VE REAL NO. * : (EG. &#39;A1&#39; WIDTH = 59.4) * DPAGMAXL=400.0 * MAXIMUM ALLOWABLE PAGE : +VE REAL NO. (INSTALLATION * LENGTH (800) : DEPENDENT) * DPAGMAXW=400.0 * MAXIMUM ALLOWABLE PAGE : +VE REAL NO. (INSTALLATION * WIDTH (800) : DEPENDENT) * DFACPLOX=1.0 * X PLOT FACTOR (800) : +VE REAL NO. * DFACPLOY=1.0 * Y PLOT FACTOR (800) : +VE REAL NO. * DMARSIZE=5.0 * MARGIN SIZE (802) : +VE REAL NO. * DPAGEING=0 * P AGEING (803) : 0 = NO PAGEING * : 1 = PAGEING * DATRUNCN=1 * TRUNCATION (803) : 0 = NO TRUNCATION * : 1 = TRUNCATION * DPENCOLR=1 * PEN COLOUR (805 AND 806) : 1 = BLACK * : 2 = RED * : 3 = GREEN * : 4 = BLUE * : 5 = CYAN * : 6 = YELLOW * : 7 = ORANGE * : 8 = PINK * : 9 = GREY * : 10= PALEBLUE * : (INSTALLATION DEPENDENT, * : IN DRCOLOURS.DAT) * DCHRTYPE=N * CHARACTER TYPE (808) : N = NO CONVERSION * : L = ALL CHARACTERS LOWERCASE * : (MACHINE DEPENDENT) * : U = ALL CHARACTERS UPPERCASE * DCHARHYT=0.18 * CHARACTER HEIGHT (808) : +VE REAL NO. * DNUMDECP=3 * NO. OF DECIMAL PLACES (808): +VE INTEGER NO. * DCHRATIO=1.0 * CHARACTER ASPECT RATIO : +VE REAL NO. (GKS MACHINE * (WIDTH/HEIGHT) (808) : DEPENDENT) * DCHARSPC=0.0 * CHARACTER SPACING (808) : +VE REAL NO. (GKS MACHINE * : DEPENDENT) * DLINSPAC=0.5 * LINE SPACING INTERVAL : +VE REAL NO. RELATED TO * FOR TEXT (808) : CHARACTER HEIGHT * RATIO OF CH. HT. * * DFONTYPE= * DEFAULT FONT NAME (808) : = USE H/W FONT * : SOF1 = DEFAULT S/W FONT1.MFF * : SOFn = USER S/W FONT n * FONT2.MFF to * FONT9.MFF * DFRAMTYP=0 * FRAME TYPE (821) : 0 = NO FRAME * : 1 = FRAME * : 2 = WINDOW * : 3 = REGISTRATION MARKS * DGRDTIKX=1.0 * GRID X TICK SIZE (822) : +VE REAL NO. * DGRDTIKY=1.0 * GRID Y TICK SIZE (822) : +VE REAL NO. * DINTSEQP=1 * POINT SEQUENCE NUMBER : +VE INTEGER NO. * INTERVAL (825) : * DLABTYPE=0 * LABELS (825 AND 826) : 0 = NO LABEL * : 1 = LABEL * DPIPLENG=0.1 * PIP LENGTH (825 AND 860) : +VE REAL NO. * DSYMLENG=1.0 * STANDARD SYMBOL LENGTH AS : +VE REAL NO. * A PROPORTION OF CURRENT : * CHARACTER SIZE (825(DETA)): * DCHMAINT=100.0 * CHAINAGE MARKING INTERVAL : +VE REAL NO. * (826,866,867) : * DOFFSEQP=0.5 * TEXT OFFSET OF POINT : REAL NO. * SEQUENCE NUMBER (PSN)(865): * DPSNMINT=1 * PSN MARKING INTERVAL (865) : +VE INTEGER NO. * DCHAMPIP=0.1 * CHAINAGE MARKING PIP : +VE REAL NO. * SIZE (866) : * DCHAMOFF=0.5 * CHAINAGE MARKING TEXT : REAL NO. * OFFSET (866) : * DCHAMAPI=0.1 * CHAINAGE-BOTH-SIDE-MARKING : +VE REAL NO. * PIP SIZE (867) : * DCHAMAOF=-0.5 * CHAINAGE-BOTH-SIDE-MARKING : REAL NO. * TEXT OFFSET (867) : * DSPOTLEV=0.5 * SPOT LEVEL TEXT : REAL NO. * OFFSET (868) : * DSTRAOFF=0.5 * STRING DIMENSION ANNOTATION: REAL NO. * TEXT OFFSET (869) : * DHATANGL=0.0 * HATCHING ANGLE (DEGREES) : REAL NO. * (875,877,879,891,892,893) : * * DHATSPAC=0.25 * HATCH SPACING (CMS) : REAL NO. * (875,877,879,891,892,893) : * * DGRADTYP=0 * GRADIENT IN PERCENT = 0 : INTEGER NO. * PERMILLE = 1 : * (864,7=-23) * THIS SWITCH WILL ONLY OPERATE IF PERCENT HAS * BEEN REQUESTED ON OPTION 809 OR SET BY * THE KEYWORD XFCANDEF (BELOW) * DCLOTHTY=0 * CLOTHOID ANNOTATION : INTEGER NO. * CL = 0 * RP = 1 * (869,4=-25) * DRDSCALE=1000.0 * DEFAULT DRAWING SCALE : REAL NO. * (803) * DINFISYM=1 * MACRO SYMBOL SWITCH FOR INFINITY RADII * 0 - PRINT OUT &quot;INFINITY&quot; * 1 - USE MACRO SYMBOL * * DREALINT=0 * SWITCH TO DETERMINE WHETHER PARTIAL DISTANCES * ARE CALCULATED USING REAL OR INTERPOLATED POINTS * ON A PAGED DRAWING * 0 - USE REAL POINTS * 1 - USE INTERPOLATED POINTS * DGSTGCOD=1 * GEOMETRY STRING CODES :INTEGER NO. * VALID CODES: * 1. HTPS - HORIZONTAL TANGENT POINTS * 2. HIPS - HORIZONTAL INTERSECTION POINTS * 3. HCEN - HORIZONTAL ARC CENTRES * 4. VTPS - VERTICAL TANGENT POINTS * 5. VIPS - VERTICAL INTERSECTION POINTS * 6. VFPS - VERTICAL FLAT POINTS * 7. VMOS - VERTICAL MID-ORDINATE POINTS * 8. SUPE - SUPERELEVATION ANNOTATION * XFCANDEF=11 * SUPERELEVATION UNITS * (809,field 4) * * This value is interpreted as two columns. * 10&#39;s column : * CROSSFALL UNITS 1* = PERCENT * 2* = DECIMAL PERCENT * 3* = 1:N * * units value if metric : * CANT UNITS (METRIC) *1 = METRES * *2 = CENTIMETRES * *3 = MILLIMETRES * * units value if imperial : * CANT UNITS (IMPERIAL) *1 = DECIMAL FEET * *2 = DECIMAL INCHES * CLUTTEXT=1 * CLUTTERED TEXT SWITCH * 0 - DO NOT REMOVE CLUTTERED TEXT * 1 - REMOVE CLUTTERED TEXT *=============================================================================== * * GEOMETRY STRING ANNOTATION * -------------------------- * * * Draw minor option 869 allows you to output Horizontal and Vertical * Tangent point data start/end labels * * * The default start/end labels are shown for Horizontal and Vertical * between - and =, the definition of the label is shown after the *. * * * To change the label appended to the drawing using DRAW minor option * 869 field 4=-46; * * * Enter after the = strt and end labels * Examples * ABCD/ABCD gives start label ABCD and end label ABCD * ABCD/EFGH gives start label ABCD and end label EFGH * /EFGH gives end label EFGH only * ABCD/ gives start label ABCD only * * * Notes * If between = and * is blank, the code between - and = is used. * A maximum of 4 characters are permitted either side of the /. * ************************************************************ * THE CODES ARE UNNECESSARY FOR BRITISH ANNOTATION AND HAVE * THEREFORE BEEN COMMENTED OUT IN THE FOLLOWING LINES * IF THE SPECIAL ANNOTATION IS REQUIRED - REMOVE THE * ASTERISK AND SPACE IN FRONT OF EACH LINE COMMENCING * WITH GEH OR GEV BELOW. ************************************************************ * * * HORIZONTAL ELEMENT BEFORE CODE ELEMENT AFTER * GEH-PBT =/GA * NONE PBT STRAIGHT * GEH-PBC =/BA * NONE PBC ARC * GEH-PAT =GE/ * STRAIGHT PAT NONE * GEH-PAC =BE/ * ARC PAC NONE * GEH-TS =GE/UA * STRAIGHT TS SPIRAL * GEH-ST =UE/GA * SPIRAL ST STRAIGHT * GEH-CS =BE/UA * ARC CS SPIRAL * GEH-SC =UE/BA * SPIRAL SC ARC * GEH-SS =UE/UA * SPIRAL SS SPIRAL * GEH-PC =GE/BA * STRAIGHT PC ARC * GEH-PT =BE/GA * ARC PT STRAIGHT * GEH-PRC =BE/BA * ARC PRC ARC * GEH-PCC =BE/BA * ARC PCC ARC * * * * * VERTICAL ELEMENT BEFORE CODE ELEMENT AFTER * GEV-PBT =/GA * NONE PBT GRADE * GEV-PBC =/BA * NONE PBC CURVE * GEV-PAT =GE/ * GRADE PAT NONE * GEV-PAC =GA/ * CURVE PAC NONE * GEV-PT =BE/GA * CURVE PT GRADE * GEV-PC =GE/BA * GRADE PC CURVE * GEV-TT =GE/GA * GRADE TT GRADE * GEV-VX =BE/BA * CURVE VX CURVE * * * Curve high or low point * GEV-VM =BE/BA * CURVE VM CURVE * * Curve middle ordinate point * GEV-PCC =BE/BA * CURVE PCC CURVE * * Curve same sense * GEV-PRC =BE/BA * CURVE PRC CURVE * * Curve opposite sense * GEV-VMX =BE/BA * CURVE VMX CURVE * * * Curve coincident high or low * * and middle ordinate point * *=============================================================================== * * * STANDARD/CURVED INTERFACE PARAMETERS * ---------------------------------------- * GRADINTR=0.667 * DEFAULT GRADIENT FOR STANDARD/CURVED INTERFACE * TANGINTR=3.0 * DEFAULT TANGENT LENGTH FOR STANDARD/CURVED INTERFACE * WDTHINTR=2.0 * DEFAULT DITCH WIDTH FOR STANDARD/CURVED INTERFACE * DPTHINTR=0.3 * DEFAULT DITCH DEPTH FOR STANDARD/CURVED INTERFACE * *=============================================================================== * * * ALIGNMENT PARAMETERS * ==================== * * * HORIZONTAL DISPLAY * ------------------ * * Available colours Available line styles * ----------------- --------------------- * * 1 --- Black 1 --- Solid * 2 --- Red 2 --- Dashed * 3 --- Green 3 -- Dotted * 4 --- Blue 4 -- Dot/dash * 5 --- Cyan * 6 --- Yellow * 7 --- Orange * 8 --- Pink * 9 --- Grey * 10--- Paleblue * * * AHDIBGDC=5 * Background colour * AHDIBGDS=1 * Background style * AHDISGDC=5 * Spline Background colour * AHDISGDS=1 * Spline Background style * AHDIELEC=6 * Element colour/working colour * AHDIELES=1 * Element style/working style * AHDISLEC=6 * Spline element colour/working colour (splines) * AHDISLES=1 * Spline element style/working style (splines) * AHDISTRC=5 * Straights colour * AHDISTRS=1 * Straights style * AHDIARCC=3 * Arcs colour * AHDIARCS=1 * Arcs style * AHDITRNC=6 * Trans colour * AHDITRNS=1 * Trans style * AHDIDIRA=1 * Direction arrows 1 --- Drawn * 2 --- Not drawn * AHDITPTM=1 * Tangent point markers 1 --- Drawn * 2 --- Not drawn * AHDITXAN=1 * Auto annotation switch 1 --- Yes * 2 --- No * * * HORIZONTAL DESIGN * ----------------- * * The chord-to-arc tolerance is held in AHDETOLR under the DESIGN * parameters. * AHDEDESP=120.000 * Design speed * AHDEMINR=250.000 * Minimum radius for spline alignments * AHDERCLA=0.300 * Maximum RCLA * AHDEDESM=1 * Design methods 1 --- Element * 2 --- I.P. * 3 --- Spline * AHDERADU=1 * 1 --- Radius * 2 --- DOC (A) * 3 --- DOC (C) * AHDECRVI=1 * Curve intersection methods (I.P. only ) * 1 --- 3IPS * 2 --- ALL IPS * AHDETRNR=1 * Transition rules 1 --- None * 2 --- French roads * 3 --- Dutch rail * 4 --- German rail * AHDETRNF=6 * Transition formulae 1 --- Clothoid * 2 --- Bloss * 3 --- Cubic * 4 --- Bi-quadratic * 5 --- Sine * 6 --- Notrans AHDECDBY=6 * Clothoid defined by * 1 --- Rules * 2 --- N/A * 3 --- A value * 4 --- RL value * 5 --- Speed * 6 --- Length AHDECOBY=2 * Clothoid overriden by * 1 --- N/A * 2 --- Length * 3 --- RL value * 4 --- A value * 5 --- Speed * * AHDEC__A=400.000 * Clothoid defined by A value * AHDEC_RL=114590.0 * Clothoid defined by RL value * AHDEC_SP=100.000 * Clothoid defined by SPEED * * DUTCH TRANSITION * ---------------- * * AHDTDESS=0.000 * Design speed * AHDTDEFF=0 * Default deficiency factor * AHDTGRDT=1 * Default gradient type * 1 --- 1:10V * 2 --- 1:8V * AHDTMITC=20.000 * Minimum theoretical crossfall * AHDTMATC=270.000 * Maximum theoretical crossfall * AHDTMAAC=150.000 * Maximum allowable crossfall * * * FRENCH TRANSITION * ----------------- * * AHFTDESS=1 * Design speed 1 --- 40 * 2 --- 60 * 3 --- 80 * 4 --- 100 * 5 --- 120 * AHFTNOLA=1 * Number of lanes 1 --- 2 * 2 --- 3 * 3 --- 4 * AHFTRDCL=1 * Road classification 1 --- AR * 2 --- RP * 3 --- UR * * * VERTICAL DISPLAY * ---------------- * * * Available colours Available line styles * ----------------- --------------------- * * 1 --- Black 1 --- Solid * 2 --- Red 2 --- Dashed * 3 --- Green 3 --- Dotted * 4 --- Blue 4 --- Dot/dash * 5 --- Cyan * 6 --- Yellow * 7 --- Orange * 8 --- Pink * 9 --- Grey * 10--- Paleblue * * * AVDIBGDC=5 * Background colour * AVDIBGDS=1 * Background style * AVDISGDC=5 * Spline Background colour * AVDISGDS=1 * Spline Background style * AVDIELEC=6 * Element colour/working colour * AVDIELES=1 * Element style/working style * AVDISLEC=6 * Spline element colour/working colour * AVDISLES=1 * Spline element style/working style * AVDIGRDC=5 * Grades colour * AVDIGRDS=1 * Grades style * AVDIHOGC=2 * Hog curves colour * AVDIHOGS=1 * Hog curves style * AVDISAGC=3 * Sag curve colour * AVDISAGS=1 * Sag curve style * AVDIVTPS=1 * Vertical T.P&#39;s * AVDIDIRM=1 * Direction markers 1 --- Drawn * 2 --- Not drawn * AVDIHTPS=1 * Horizontal T.P&#39;s 1 --- Drawn * 2 --- Not drawn * AVDIVERM=1 * Vertex markers 1 --- Drawn * 2 --- Not drawn * AVDITXAN=1 * Auto annotation switch 1 --- Yes * 2 --- No * * * VERTICAL DESIGN * --------------- * * AVDEDESM=4 * Design method 4 --- Element * 5 --- IP * 6 --- Spline AVDECURP=2 * Curve parameter 1 --- M-value * 2 --- Radius * 3 --- K-value * AVDECUIM=1 * Curve intersection method (I.P. only) * 1 --- 3-IPS * 2 --- ALL IPS * AVDEEMHG=0.000 * Extreme M value, hog * AVDEEMSG=0.000 * Extreme M value, sag * AVDEERHG=0.000 * Extreme radius, hog * AVDEERSG=0.000 * Extreme radius, sag * AVDEEKHG=0.000 * Extreme K value, hog * AVDEEKSG=0.000 * Extreme K value, sag * AVDEMAGD=0.000 * Maximum gradient * AVDEMIGD=0.000 * Minimum gradient * AVDEDMHG=10.000 * Default M value, hog * AVDEDMSG=10.000 * Default M value, sag * AVDEDRHG=1000.0 * Default radius, hog * AVDEDRSG=1000.0 * Default radius, sag * AVDEDKHG=10.000 * Default K value, hog * AVDEDKSG=10.000 * Default K value, sag * AVDEMICL=0.000 * Minimum curve length * AVDEDLHG=100.000 * Default length, hog * AVDEDLSG=100.000 * Default length, sag * AVDEKVAL=1 * K value 1 --- UK * 2 --- AASHTO * AVDEDESS=120 * Design speed * AVDECREC=2 * Crest criterion * 1 --- Overtake * 2 --- Desmin * 3 --- Absmin * *=============================================================================== * * SUPERELEVATION PARAMETERS * ========================= * * SUPERELEVATION DISPLAY * ---------------------- * SUPCOLOR=2 * Superelevation applied colour * See HORIZONTAL DISPLAY for available * colours * * SUPERELEVATION DESIGN * --------------------- * SUPAPPLI=1 * Application 0 --- None * 1 --- Crossfall * 2 --- Cant * * CROSSFALL PARAMETERS * -------------------- * CROSUNIT=2 * Crossfall units 1 --- Percent * 2 --- Decimal * percent * 3 --- 1 : N * CROSTHEO=0 * Theoretical Crossfall 0 --- Not applied * 1 --- Applied * CROSFACT=2.828 *Theoretical Crossfall factor * CROSROUN=1 * Rounding for crossfall 1 --- Nearest * 2 --- Up * 3 --- Down * CROSTLPC=0.5 * Round up, down or to the nearest * (percent) CROSTLDC=0.005 * Round up, down or to the nearest * (decimal percent) CROSTL1N=20.0 * Round up, down or to the nearest (1:N) * CROSMNPC=2.5 * Minimum crossfall (percent) CROSMNDC=0.025 * Minimum crossfall (decimal percent) CROSMN1N=40.0 * Minimum crossfall (1:N) * CROSMXPC=7.0 * Maximum crossfall (percent) CROSMXDC=0.07 * Maximum crossfall (decimal percent) CROSMX1N=15.0 * Maximum crossfall (1:N) * CROSINPC=2.5 * Inflection crossfall (percent) CROSINDC=0.025 * Inflection crossfall (decimal percent) CROSIN1N=40.0 * Inflection crossfall (1:N) * * CANT PARAMETERS * --------------- * CANTUNMT=1 * Cant units (metric) 1 --- mms * 2 --- cms * 3 --- metres CANTUNIM=1 * Cant units (Imperial) 1 --- inches * 2 --- feet * CANTTHEO=0 * Theoretical Cant 0 --- Not applied * 1 --- Applied * CANTFACT=0.085 * Theoretical Cant factor * CANTROUN=1 * Rounding for cant 1 --- Nearest * 2 --- Up * 3 --- Down * CANTTLMM=5.0 * Round up, down or to the nearest (mm) CANTTLCM=0.5 * Round up, down or to the nearest (cm) CANTTLMT=0.05 * Round up, down or to the nearest (metre) CANTTLIN=0.5 * Round up, down or to the nearest (inch) CANTTLFT=0.042 * Round up, down or to the nearest (foot) * CANTMNMM=0.0 * Minimum cant (mm) CANTMNCM=0.0 * Minimum cant (cm) CANTMNMT=0.0 * Minimum cant (metre) CANTMNIN=0.0 * Minimum cant (inch) CANTMNFT=0.0 * Minimum cant (foot) * CANTMXMM=150.0 * Maximum cant (mm) CANTMXCM=15.0 * Maximum cant (cm) CANTMXMT=0.15 * Maximum cant (metre) CANTMXIN=6.0 * Maximum cant (inch) CANTMXFT=0.5 * Maximum cant (foot) * CANTINMM=0.0 * Inflection cant (mm) CANTINCM=0.0 * Inflection cant (cm) CANTINMT=0.0 * Inflection cant (metre) CANTININ=0.0 * Inflection cant (inch) CANTINFT=0.0 * Inflection cant (foot) * * END OF SUPERELEVATION PARAMETERS * -------------------------------- * * CREATE M-STRING PARAMETERS * -------------------------- * CRMCHINT=10.0 * Chainage interval * CRMDRAWM=1 * Draw master string 1 = Yes * 0 = No * * END OF CREATE M-STRING PARAMETERS * --------------------------------- * * Railway params: TOGLCON1=1 * component library * * 1=Type 1 * * 2=Type 2 * RAILGAUG=1435.0 * STANDARD RAIL GAUGE PARAMETER (millimeters) * *=============================================================================== * * PARAMETERS FOR 3 CENTRE CURVES * ------------------------------ * TCCANG01=15.75 * SUBTENDED ANGLE OF ARC 1. * (SEE IN_ANGLE FOR UNITS = DECIMAL DEGREES) TCCANG03=20.25 * SUBTENDED ANGLE OF ARC 3. * (SEE IN_ANGLE FOR UNITS = DECIMAL DEGREES) TCCRAT01=2.0 * RATIO OF RADIUS OF ARC 1 TO RADIUS OF ARC 2 TCCRAT03=3.0 * RATIO OF RADIUS OF ARC 3 TO RADIUS OF ARC 2 * * PARAMETERS FOR ITALIAN 3 CENTRE CURVES * -------------------------------------- * TCCANC =0.6 * MAX LATERAL ACCELERATION TCCANCD =0.6 * MAX LATERAL ACCELERATION (FREIGHT COMPONENT) TCCC =0.15 * RATE OF CHANGE OF LATERAL ACCELERATION TCCI01 =0.2 * CANT GRADIENT (V&gt;75) TCCI02 =0.15 * CANT GRADIENT (75&lt;V&lt;=100) TCCI03 =0.1 * CANT GRADIENT (100&lt;V&lt;=125) TCCI04 =0.1 * CANT GRADIENT (125&lt;V&lt;=160) TCCVELO =155.0 * ITALIAN DESIGN SPEED * * * DRAINAGE PARAMETERS * DRAIPROG=4 * Default program 1 --- Wallrus * 2 --- MicroRAT * 3 --- MicroDrainage Windes Version 5 * 4 --- MicroDrainage Windes Version 6/7 * DRAIMEAS=2 * Default measurement method 1 --- edge to edge * 2 --- centre to centre * DRAIRETP=1 * Global variable 1 - Return period (years-max=99) DRAILOCA=1 * Global variable 2 - Location (1=Eng&amp;Wales) DRAIM560=15 * Global variable 5 - M5-60 (mm) DRAIRATI=0.5 * Global variable 6 - Ratio DRAIMXRF=20 * Global variable 8 - Maximum rainfall (mm) DRAIGTOE=5 * Global variable 13- Global time of entry (mins) * PROXCHCK=1 * Manhole and branch proximity check with carriageway * 1 = on * 2 = off * PIPEDIST=1.0 * Minimum distance for pipe proximity check PIPESIZE=0.15 * Nominal pipe size for pipe proximity check (diameter m) MANHDIST=0.5 * Minimum distance for manhole proximity check * DEFMASK1=C * Default mask 1 to be included in mask for proximity check DEFMASK2=C * Default mask 2 to be included in mask for proximity check DEFMASK3=C * Default mask 3 to be included in mask for proximity check DEFMASK4=C * Default mask 4 to be included in mask for proximity check * The above masks can only be 4 characters long and must be * the first 4 characters after the = sign * LNGTCHCK=1 * Drainage length checking as manholes are linked * 1 = on * 2 = off * LNGTDIST=100.0 * Maximum distance for drainage pipe length checking * * * IGMACRO COLOURS * * Available colours * ----------------- * * 1 --- Black * 2 --- Red * 3 --- Green * 4 --- Blue * 5 --- Cyan * 6 --- Yellow * 7 --- Orange * 8 --- Pink * 9 --- Grey * 10--- Paleblue * MACMESH1=5 * Mesh 1 colour MACMESH2=4 * Mesh 2 colour MACORIGN=2 * Origin colour MACPDPER=3 * Pen Down permiable line colour MACPDIMP=6 * Pen Down impermiable line colour MACPUIMP=1 * Pen up impermiable line colour * * * COMPRESS FLAG COMPRESS=0 * During COMPRESS create archive file as * 0 = Temporary file * 1 = Permanent file * * SKEWSECT=0 * set skew section flag KINKBLOC=0 * set kink block flag * * *Survey Parameters *------------------------ * CURVCORR=0 * Curvature correction : 0 = Curvature correction OFF * (Survey minor option 200 field 8) : 1 = Curvature correction ON * *Working v Final Drawing Parameter *--------------------------------- * MXAPPDRG=0 * 0 = Use working drawings * 1 = Use final drawings * *SWITCH TO DETERMINE WHETHER TO INTERPOLATE OR PUT A DISCONTINUITY WHERE NO INTERFACE IS FOUND INTERDIS=0 * 0 - IF THERE IS NO INTERFACE FOUND * AT A SECTION THEN INTERPOLATE BETWEEN THE SECTIONS * 1 - IF THERE IS NO INTERFACE FOUND * PUT A DISCNTINUITY BETWEEN THE SECTIONS STRINGNC=0 * 0 - String Naming Convention will not be enabled * when a new project is created * 1 - String Naming Convention will be enabled * when a new project is created FINI </pre></p><div style="clear:both;"></div>