Superman could see through walls. In Microstation we can too with the wireframe view display type, but we don't get any visual depth clues. The "Superman" view is a way to setup your models so that you can see through the other disciplines' models but have all of your discipline's geometry appear solid. This works well in all of the BIM products, no matter what discipline you are:
.
You will now be able to see through walls, columns, ducts, etc. while your elements will remain solid. (This is a similar effect to the Transparent view display mode in v8i, except, in Transparent, everything is see- through. In the "Superman" view the objects in the active file are still solid.)
Stuart,
If all you want to change is the Transparency, the correct key-in appears to be:
reference adjustcolors 100,100,,,,50
The key-in will set the values in the dialog.
Here's the syntax:
REFERENCE ADJUSTCOLORS (Value 0-100), Saturation (0-100), Print Adjusted colors(0 for off or 1 for on), Adjustment Factor(0 or blank) or Fixed (1), Hue(Blank for off or 0-100 for value and on), Transparency(0-100)
-Noel