Hello,
I have to process a flight that was done two years ago and there is no rotation info in the pics. I've always had the pictures with this info.
This is the result after first attempt.
Thanks,
Try to run aerotriangulation with tie points density:high and component construction:multi-pass
Also adding tangential distortion:adjust may help if no prior camera calibration is done.This is typical problem for starters that leaves a bad impression of Contextcapture that if data is not acquired accordingly then the results are either curved(spherical effect) or wrongly aerotriangulated. For some reason this doesn't happen for Pix4d but on the other hand Contextcapture models are more accurate.https://communities.bentley.com/products/3d_imaging_and_point_cloud_software/w/wiki/28536/the-model-appears-to-be-curved-instead-of-being-horizontal-after-athttps://communities.bentley.com/products/3d_imaging_and_point_cloud_software/w/wiki/25554/the-block-is-affected-by-a-spherical-effect-after-aerotriangulation
>was removed of the drone last year
Crashed?
I think was for better performance.