Hi
I have 10 aerial photos and want to create an AT, but it fails during keypoint extraction. The 10 photos are divided into 10 photogroups with one photo in each group. Could that be the problem and how does I fix it then?
Kind regards Peter
What camera did you use? The sensor size seems quite large
Farouk Rohoman
A3 Edge. The width of the photos are around 64.000 pixels
Peter, my experience tells me that what you're trying to do is not going to work. Am I right that you've tried to import 10 swaths from the A3 ? I see that you dont have the camera model specified. Using swaths is going to be difficult in CC. You'll need to specify the internal orientation of the images yourself and that with A3 is... mission impossible unless you export frames from LightSpeed. I remember back in the days there was a special version of LS which had (again back in the days) Acute3D support. It could export frames with orientations , together with a block ready for import in CC.
Its like adding ADS lifts in CC... wow :)
Cheers,
Ivan