Model Mesh from point cloud in Context Capture

RE: Model Mesh from point cloud in Context Capture

Mathieu St-pierre — Fri, 22 Feb 2019 13:34:07 GMT

Hi Ricardo,

One of my colleague told me that it might be that you didn't specify the SRS (geocoordinate system) during import.

We could further investigate the issue if you could send us the logs file, which can be done by right clicking on failed tiles then choose "Export log file for technical support".

Thanks,

Mathieu

RE: Model Mesh from point cloud in Context Capture

Ricardo Garnica — Thu, 21 Feb 2019 06:11:40 GMT

Hi Mathieu, I have a problem. I tried to create a mesh using LAS data from USGS, little areas, but I can't obtain results, the process stops in 72% and never finish. I have ContextCapture version 4.4.9. Thank you

RE: Model Mesh from point cloud in Context Capture

Mathieu St-pierre — Wed, 09 Jan 2019 20:42:19 GMT

Hi Michal,

FYI scanner position for each points could be made available whatever the coordinates used. It really depends on the data provider.

Here is a short video showing point cloud import (https://www.youtube.com/watch?v=GmHt3AtXzu0).

HTH,

Mathieu

RE: Model Mesh from point cloud in Context Capture

Michał Wójcik — Tue, 08 Jan 2019 19:49:59 GMT

My point cloud was made from lidar data. All points have coordinates in Pl 2000 EPSG 2178 so i don't have scanner position.

RE: Model Mesh from point cloud in Context Capture

Mathieu St-pierre — Wed, 02 Jan 2019 14:24:04 GMT

Hi Micha,

There is a requirement for the imported point cloud to have the scanner position for each points. Is your point cloud fulfilling this requirement?

HTH,

Mathieu