Webinar Photo acquisition

RE: Webinar Photo acquisition

Apollo Aerial Systems — Mon, 03 Feb 2020 14:10:20 GMT

Hello:

I am not exactly sure of what you are looking for. The software uses all the principles of photogrammetry If you are familiar with these principles you should be able to work through processing you images.

I have be using the software for about 8 years and while it's not perfect it does a good job of creating 3D models, ortho-photos and point clouds.

I take the aerial photos for my projects using a conventional aircraft flying about 1000 feet above the ground; I usually fly overlapping circles around the area of interest and use a Nikon D3200 camera with a 200mm lens. This type of flight plan works well for smaller projects but I am looking to integrate photos taken on the ground with the aerial images and also increasing the size of my project area.

Farouk Rohoman

RE: Webinar Photo acquisition

ioannis gavrilakis — Mon, 03 Feb 2020 07:51:47 GMT

Thanks a lot,

i have watched but he does not give more info about camera lenses that use, the procedure in workstation, very general things that we know them alreday..

I want step by step instructions and more details in order to begin right my learning curve..

RE: Webinar Photo acquisition

Apollo Aerial Systems — Sun, 02 Feb 2020 19:13:32 GMT

Hello:

I finally found the link to the webinar

https://event.on24.com/eventRegistration/EventLobbyServlet?target=reg20.jsp&partnerref=SocialMedia&eventid=2176856&sessionid=1&key=516A9D2415E41DE7598F371A01FE64B8&regTag=&sourcepage=register

It was published by Aude Camus, a Senior Product Manager at Bentley, on Linkedin. You have to register to view it

Farouk Rohoman

RE: Webinar Photo acquisition

Apollo Aerial Systems — Sun, 02 Feb 2020 19:13:32 GMT

Hello All

I finally found the link to the webinar

event.on24.com/.../EventLobbyServlet

It was published by Aude Camus, a Senior Product Manager at Bentley, on Linkedin. You have to register to view it

Farouk Rohoman

RE: Webinar Photo acquisition

Apollo Aerial Systems — Sun, 02 Feb 2020 18:08:42 GMT

Hello

I found it on the Bentley site under the SIG group a few days ago; however I can't seem to find it again, hence my post

RE: Webinar Photo acquisition

ioannis gavrilakis — Sun, 02 Feb 2020 15:42:15 GMT

Hello sir, where did you get that webinar i am interested too to view it because i have many problems in my learning curve..