Aerotriangulation endless processing loop

RE: Aerotriangulation endless processing loop

Cyril NOVEL — Fri, 18 Dec 2020 08:06:57 GMT

Hello Romain,

Great to see that you are able to process the data. I've forwarded your log to the appropriate dev, he will investigate what's going on.

- Cyril

RE: Aerotriangulation endless processing loop

Romain Rubi — Thu, 17 Dec 2020 17:17:50 GMT

Hello Cyril,

I did it on a more powerfull computer, and it fails for insufficient memory. So I extract several sub-blocks from the "big data", and process the AT and Model one by one. Thank you for your help. I well appreciate to have had a repply. For your curiosity I put the log file below.

Romaincommunities.bentley.com/.../CanalV4_2D00_insufficient-memory.zip

RE: Aerotriangulation endless processing loop

Cyril NOVEL — Thu, 17 Dec 2020 16:33:17 GMT

Hello Romain,

I looked at your logs. Since you are trying an AT with a lot of pictures (>16000), this part of the AT can be long. Can you try running the job longer and export again the log?

Thanks,

-Cyril

RE: Aerotriangulation endless processing loop

Romain Rubi — Wed, 16 Dec 2020 09:28:50 GMT

Hello Cyril,

Thanks for considering my issue. I upload the log file below.

Romain

PS I think I try on AR with too much pictures ;-)

Romain

communities.bentley.com/.../Looping_5F00_Block.zip

RE: Aerotriangulation endless processing loop

Cyril NOVEL — Wed, 16 Dec 2020 08:07:04 GMT

Hello Romain,

Can you right click on the block when the AT is running, then Export > Export log, and upload the zip file here so we can have a look at the logs to understand what's going on?

Thanks,

- Cyril