Dear Bentley Community,
Usually everything is working fine until the last aerotriangulation... the engine is stuck with one process.
The percentage progression starts an endless loop from 66% to 74% and again 66% to 74% and again and again...
The problem is that I don't have error message or "real" fail because of the endless loop
Do you have any ideas or solution ?
Best regards
Hello Romain,
Great to see that you are able to process the data. I've forwarded your log to the appropriate dev, he will investigate what's going on.
- Cyril
Hello Cyril,
I did it on a more powerfull computer, and it fails for insufficient memory. So I extract several sub-blocks from the "big data", and process the AT and Model one by one. Thank you for your help. I well appreciate to have had a repply. For your curiosity I put the log file below.
RomainCanalV4-insufficient memory.zip
I looked at your logs. Since you are trying an AT with a lot of pictures (>16000), this part of the AT can be long. Can you try running the job longer and export again the log?
Thanks,
-Cyril
Thanks for considering my issue. I upload the log file below.
Romain
PS I think I try on AR with too much pictures ;-)
Looping_Block.zip
Can you right click on the block when the AT is running, then Export > Export log, and upload the zip file here so we can have a look at the logs to understand what's going on?