Anyone managed to fully process images obtained using DJI Zenmuse P1 and smart oblique?
Many oblique images (180 out of 400 images) are excluded from the component by error "This photo is not calibrated"
sample data can be obtained from the following link.
https://drive.google.com/drive/folders/1kRVSscz3i5t3urzx0KLTwajcr8JTK4zA
Hi John
In the Aerotriangulation definition settings select the "Load preset " button and go to C:\Program Files\Bentley\ContextCapture\Presets\AT to select and load the "Do not use pose metadata for SfM" preset file.. Run the aerotriangulation using this preset to resolve your issue.
Where do you get the "Do not use pose metadata for SfM" preset file? I do not have it under presets, could you provide it?
You will need to have ContextCapture Update 17. If so, you will find this in the following location:
C:\Program Files\Bentley\ContextCapture\data\Presets\AT
I am unsure how to get that update? I'm on the latest version.
Sorry that was a typing error. The latest version is update 17 which is what I had meant to type. If you have this version please look in the location I gave for the preset. If it is not there then your installation is incomplete so I would suggest a reinstallation.