DJI P1 smart oblique photo not calibrated

Question

Anyone managed to fully process images obtained using DJI Zenmuse P1 and smart oblique? 
 Many oblique images (180 out of 400 images) are excluded from the component by error "This photo is not calibrated" 
 sample data can be obtained from the following link. 
 https://drive.google.com/drive/folders/1kRVSscz3i5t3urzx0KLTwajcr8JTK4zA

Felix James · Accepted Answer

I used the following settings with no loss of photos: 
 A. Positioning/georeferencing: - Adjustment constraints: none - Final rigid registration: photo positioning metadata B. Main settings: - Key point density: Normal - Tags or QR Codes extraction: Disabled - Pair selection mode: Default - Component construction mode: OnePass - Blockwise color equalization: Enabled - Splats: Enabled C. Estimation policies: - Tie points: Compute - Position: Compute - Rotation: Compute - Photogroup estimation mode: MultiPass - Focal length: Adjust - Principal point: Adjust - Radial distortion: Adjust - Tangential distortion: Adjust - Aspect ratio: Keep - Skew: Keep - Estimation groups: PerPhotogroup - Using low level settings: Do not use pose metadata for SfM

Felix James · Answer

Hi John 
 In the Aerotriangulation definition settings select the "Load preset " button and go to C:\Program Files\Bentley\ContextCapture\Presets\AT to select and load the " Do not use pose metadata for SfM" prese t file.. Run the aerotriangulation using this preset to resolve your issue.

Felix James · Answer

You will need to have ContextCapture Update 17. If so, you will find this in the following location: 
 C:\Program Files\Bentley\ContextCapture\data\Presets\AT

DJI P1 smart oblique photo not calibrated

Top Replies