error when building a point cloud and 3d model. (task error (returned: 273965065) version update 18 v10.18.0.232

RE: error when building a point cloud and 3d model. (task error (returned: 273965065) version update 18 v10.18.0.232

Cyril NOVEL — Thu, 02 Dec 2021 13:44:01 GMT

Hello Igor,

"Abnormal program termination: memory exhausted" is what I can see from the logs. Please try smaller tiles if possible.

Thanks

RE: error when building a point cloud and 3d model. (task error (returned: 273965065) version update 18 v10.18.0.232

Igor XXX — Thu, 25 Nov 2021 11:13:41 GMT

What could be the problem in building the modelcommunities.bentley.com/.../Production_5F00_3.zip

RE: error when building a point cloud and 3d model. (task error (returned: 273965065) version update 18 v10.18.0.232

Igor XXX — Thu, 25 Nov 2021 07:40:37 GMT

I'm sorry, I found it.

RE: error when building a point cloud and 3d model. (task error (returned: 273965065) version update 18 v10.18.0.232

Igor XXX — Thu, 25 Nov 2021 07:33:51 GMT

Why does this warning appear?

I can't find CC Settings

RE: error when building a point cloud and 3d model. (task error (returned: 273965065) version update 18 v10.18.0.232

Igor XXX — Thu, 25 Nov 2021 07:10:55 GMT

Thanks.

RE: error when building a point cloud and 3d model. (task error (returned: 273965065) version update 18 v10.18.0.232

Sylvain Lotteau — Wed, 24 Nov 2021 08:15:10 GMT

Hello Igor,

presets are still available in update 19. Please see attached screenshot. Just click on the folder icon in the aerotriangulation settings page and load your preset.

Thanks

Sylvain

RE: error when building a point cloud and 3d model. (task error (returned: 273965065) version update 18 v10.18.0.232

Oto — Tue, 23 Nov 2021 14:51:48 GMT

Metashape/Pix4D uses internal precalibration so it cheats a little bit and is more fool-proof. CC will give more accurate results without doing blackbox adjustments.

RE: error when building a point cloud and 3d model. (task error (returned: 273965065) version update 18 v10.18.0.232

Igor XXX — Tue, 23 Nov 2021 14:06:21 GMT

on the computer on Agisoft Metashape software there is no such thing

RE: error when building a point cloud and 3d model. (task error (returned: 273965065) version update 18 v10.18.0.232

Igor XXX — Tue, 23 Nov 2021 14:02:49 GMT

the latest firmware versions are installed

RE: error when building a point cloud and 3d model. (task error (returned: 273965065) version update 18 v10.18.0.232

Oto — Tue, 23 Nov 2021 13:09:39 GMT

Try to reuse calibration from 3D flight. It is also better to fly higher above forests. Upgrade DJI firmware as it seems Zenmuse is capturing part of UAV or you will have to add mask in left corner.

RE: error when building a point cloud and 3d model. (task error (returned: 273965065) version update 18 v10.18.0.232

Igor XXX — Tue, 23 Nov 2021 12:37:47 GMT

After triangulation, it turns out like this. Part of the photo flew upwards

RE: error when building a point cloud and 3d model. (task error (returned: 273965065) version update 18 v10.18.0.232

Oto — Tue, 23 Nov 2021 12:06:03 GMT

In latest version this preset is no longer needed. You could reuse it from older version if needed.

Also try legacy engine preset.

RE: error when building a point cloud and 3d model. (task error (returned: 273965065) version update 18 v10.18.0.232

Igor XXX — Tue, 23 Nov 2021 12:00:57 GMT

using DJI Zenmuse P1 in smart oblique mode

RE: error when building a point cloud and 3d model. (task error (returned: 273965065) version update 18 v10.18.0.232

Igor XXX — Tue, 23 Nov 2021 11:43:21 GMT

Thanks. One question. In update 19 not file preset "Do not use pose metadata for SfM". in Folder C:\Program Files\Bentley\ContextCapture\Presets\AT. Problem with DJI p1 aerotriangulation. Not all foto calibrated. This problem was raised earlier in the forum https://communities.bentley.com/products/3d_imaging_and_point_cloud_software/f/contextcapture-descartes-pointools-forum/211116/dji-p1-smart-oblique-photo-not-calibrated. Where to find this preset file?

RE: error when building a point cloud and 3d model. (task error (returned: 273965065) version update 18 v10.18.0.232

Oto — Mon, 22 Nov 2021 10:30:43 GMT

Update to U19 if possible.