Hello!
in Menu Surveys (Update 19 ) it is not possible to enter tie points with the given coordinate system. And it turns out only local
You have to input either as user tie points or GCPs. User tie points are only in local photo coordinates so it is expected.
how to correctly enter anchor points with known coordinates in the survey menu, in order to anchor the model by these marks without using metadata. Choose tie point type, but you cannot enter their coordinates there, if Control point type, you can enter the coordinates in a certain coordinate system
You either import Survey points from txt or choose coordinate system manually for each control point if created by add. If it is WGS84 coordinate then choose this if it is local then choose local arbitrary. Best is to define custom coordinate system if it is not in database.
Not really clear what is a problem?
Yes, I choose coordinate system manually for each control point if created by add. If it is WGS84.
Next, I put a marker on the photo
The problem is how to further calculate the 3D model attached to these markers. What should be the settings in the reconstruction parameters? Thanks.
You have to run aerotriangulation again and adjust to control points.
At least 3 control points are needed and each marked at least in 3 photos only then it will allow to select it in aerotriangulation.