Hello!
in Menu Surveys (Update 19 ) it is not possible to enter tie points with the given coordinate system. And it turns out only local
You have to input either as user tie points or GCPs. User tie points are only in local photo coordinates so it is expected.
how to correctly enter anchor points with known coordinates in the survey menu, in order to anchor the model by these marks without using metadata. Choose tie point type, but you cannot enter their coordinates there, if Control point type, you can enter the coordinates in a certain coordinate system
If GCPs are measured with RTK/PPK GPS then don't use rigid method as rigid is only for innacurate data.
Thank you very much for your help. Yes, I am reading the contextcapture documentation, but apparently I have misunderstood these nuances. The control points I determine with the GNSS receiver and I want to link to these markers by photo model
And if I get the coordinates of the photo centers in RTK mode of the drone using the D-RTK base, which settings are better to use?
For RTK you would set adjustment to photo position metadata and use GCPs as checkpoints or controlpoints. For best results then do not run aerotriangulation before adding GCPs. For RTK mostly the altitude needs to be adjusted.
There is one more undocumented step when using RTK - https://communities.bentley.com/products/3d_imaging_and_point_cloud_software/f/contextcapture-descartes-pointools-forum/185980/offset-in-altitude-after-at-with-p4-rtk/545231#545231
Thanks, Oto very much for your help