combine different 3mx files together

Hi Oto thank you for the response I tried outside cc .mentioned below is the way i did to combine the files, still its not working is there any way you know to combine and view these file together?

{"3mxVersion": 1,
"name":"Adelaide_HV_Trench",
"description":"Scene generated by ContextCapture, copyright <a href='http://www.bentley.com' target='_blank'>Bentley</a>.",
"logo":"logo.png",
"sceneOptions":[{"navigationMode":"ORBIT"}],
"layers": [
{
"type":"meshPyramid",
"id":"mesh0",
"name":"Adelaide_HV_Trench",
"description":"Model generated by ContextCapture, copyright <a href='http://www.bentley.com' target='_blank'>Bentley</a>.",
"SRS": "PROJCS[\"HS2_Snake_2015\",GEOGCS[\"WGS 84\",DATUM[\"HS2SD_2015\",SPHEROID[\"WGS84\",6378137,298.257223563],EXTENSION[\"PROJ4_GRIDS\",\"HS2TN15_NTv2.gsb\"]],PRIMEM[\"Greenwich\",0],UNIT[\"degree\",0.0174532925199433]],PROJECTION[\"Transverse_Mercator\"],PARAMETER[\"latitude_of_origin\",52.3],PARAMETER[\"central_meridian\",-1.5],PARAMETER[\"scale_factor\",1.0],PARAMETER[\"false_easting\",198873.0046],PARAMETER[\"false_northing\",375064.3871],UNIT[\"metre\",1.0],AUTHORITY[\"Bentley\",\"201002\"]]",
"SRSOrigin": [290084,289879,0],
"root": "Data_1/Adelaide_HV_Trench.3mxb"
},
{
"type":"meshPyramid",
"id":"mesh0",
"name":"PNm3638_Adelaide_Rd_Asmbuilt_HV(3MX)",
"description":"Model generated by ContextCapture, copyright <a href='http://www.bentley.com' target='_blank'>Bentley</a>.",
"SRS": "PROJCS[\"HS2_Snake_2015\",GEOGCS[\"WGS 84\",DATUM[\"HS2SD_2015\",SPHEROID[\"WGS84\",6378137,298.257223563],EXTENSION[\"PROJ4_GRIDS\",\"HS2TN15_NTv2.gsb\"]],PRIMEM[\"Greenwich\",0],UNIT[\"degree\",0.0174532925199433]],PROJECTION[\"Transverse_Mercator\"],PARAMETER[\"latitude_of_origin\",52.3],PARAMETER[\"central_meridian\",-1.5],PARAMETER[\"scale_factor\",1.0],PARAMETER[\"false_easting\",198873.0046],PARAMETER[\"false_northing\",375064.3871],UNIT[\"metre\",1.0],AUTHORITY[\"Bentley\",\"201002\"]]",
"SRSOrigin": [290088,289874,0],
"root": "Data_2/PNm3638_Adelaide_Rd_Asmbuilt_HV(3MX).3mxb"
}
]
}

In contextcapture no. Only outside CC.

 Merging 3MX Files   Can I offset the base position of a 3MX model ? 

But it is not supported by web viewer. Multi-layers were not supported. 3mx/3sm are very limited formats.

Hi Kevin,

You should post this on ContextCapture Forum. Click on more and move this post.
communities.bentley.com/.../contextcapture-descartes-pointools-forum