• zoom in and zoom out limitation in web viewer

    hello, i want to create a limitation for zoom in and zoom out and orbit in the viewer for users. what should I do and if I should write a code, then where should I write? would you please help me? thank you
  • Import object to ContextCapture

    Hi All I have calculated a 3D mesh from a drone capture. Now, in this mesh i would like to import a 3D model, i have drawn in 3DS max (Antenna) and afterwards export it to a 3MX file. Does anyone know, if this is possible? I have tried to do it through…
  • Error on LOD generation with 3MX

    LOD generation failed Did anyone get the same problem when creating 3MX model and get the same error code? There is enough space in my drive, and the directory is accessible. Can anyone help! Thanks, Scott
  • RAM configuration

    Hello, I am upgrading my setup to run render for ContextCapture. I was wandering if I need 128Gb of RAM. I read that 128Gb is only interesting for processing ultra-large blocks of photos. Is a 300 Gigapixels block relate to that? Also, what is…
  • how to run a tile that did not complete without running the whole production again

    Hello CC Community, I am probably missing something simple, but when I have a very large production, like a .3mx file, that is rendered out in tiles and only some of the tiles get completed, how do you run the remaining tiles without cancelling the…
  • Gaps and holes in 3D model

    Hi everyone, As I am quite new into Bentley, could you please help here? I did the 3D mapping of the old church using P4ProV2 and did processing in ContextCapture. Two sides of the church got reconstructed quite good While the other two have gaps blurry…
  • Extract seed points.

    In this model the seed points created do not touch the ground, they are above or below the surface of the model, they are usually groups of three points only aligned at several places of the model away from each other. Next, there are the seed points…
  • Mesh problem - holes in reconstruction

    Hello, I have a UAV surveying made with a DJI M300 that successfully pass the aerotriangulation process, but at the reconstruction step it generates a 3mx mesh with holes in it. the zone is difficult because it does not have enough visual features…
  • can't save screenshot from 3D viewer

    Hello there, I'm trying to save a screenshot from the contextcapture Acute 3D viewer (a 3mx file). All gos well, it gets me to the stage of choosing a folder to save in, and all looks normal. But after pressing "save", there's nothing in the folder…
  • Issue with OpenRoads Designer reading the georeference of my 3mx file.

    I'm attempting to bring a .3mx file into ORD so that I may convert it into a TIN file. I'll explain my steps as well as where the error with georeferencing begins, along with some screen shots. 1) Create a .3mx file, with the Production set to export…
  • STL failed to import

    Hi all, I'm fairly new to Context Capture, but is there any reason for a 3sm file to "failure to load" when attaching it as an STL? I converted a 3mx file as a 3sm file and now I'm trying to import the 3sm file in as an STL Appreciate your help…
  • Error: The 3D view is not available because the spatial reference system is not supported for display.

    I am receiving this error message while trying to view my 3MX completed production in "3D View". When I open the production in ContextCapture Viewer, my surface shows up as one thin vertical line. I have checked the accuracy of my control points, my aerotriangulation…
  • Importing FBX or OBJ files

    New to this process so I have a couple questions. What it the best format for export to a 3D mesh file? We are scaning outside objects Once we have the 3D mesh file created by ContentCapture (using the console) in FBX or OBJ format, what…
  • Updating/Patching previous ContextCapture 3D Model

    Hello everyone, I was wondering if is there any known way of "updating" a 3D model (.3mx) created in ContextCapture, just for the sake of not processing the whole project again. In other words, what I need is to process a small portion of a previously…
  • Convert .3mx to .imodel

    Hi, is there any chance to convert .3mx model to .imodel format? My client wants me to use his .3mx models with iModel.js library. As I understand from iModel documentation, accepted extensions to upload are .bim and .imodel. I've tried to publish …
  • ContextCapture Cloud: missing functions

    I've been using ContextCapture Cloud for a while now, and there are some key functions I'm missing in the software as it is today. I’ve made a list of functions I see as key to optimize the workflow. The possibility to change coordinate system before…
  • ContextCapture Editor > Deliver tab > Merge

    Well I was trying to save out a image and co-ordinates (ecw, tif, jpg) so I can pass onto a client. The "Outout Type" - single file works. Although the "Output type" - Multiple files, is haphazard. Apparently I need a File with a model that has a Grid…
  • Virtual Reality

    Hello, on which platform we can present our 3MX extension models in Context Capture with virtual reality glasses. I am currently using the Sketchfab website and converting my 3MX file to OBJ format, most of the time the file size is more than 500MB. Is…
  • 3MX file geo-referencing incorrectly into Microstation

    I'm trying to reference a 3mx file into Microstation. The mesh comes in with Easting and Northing both too large by a factor of 3.281... Living in North Carolina, I am using the GCS NAD83 EPSG:2264. This GCS is in USft. My microstation drawing and my…
  • Convert any 3D model to Reality mesh

    Is it possible to convert any 3D model(like OBJ or DGN) to S3C/3MX or 3SM format?
  • 3mx詢問

    航拍有gsd問題 但是lidar沒gsd問題 請問是要如何合成兩個3mx模型 還是本軟體還沒這項功能
  • Context Capture undefined job queue

    Hii I have been facing a problem in Context Capture for last few weeks, everytime I open one of my old project and submit a new production it shows a message "Failed to Submit Production" and says "Undefined Job Queue". Kindly help to resolve the…
  • contextcapture 3mx

    Production_1 - Tile_+017_+003_+000.zip Production_1 - Tile_+009_+008_+001.zip 同一個區域 卻會跑失敗,我看兩份文件的差別 之前有用同範圍只是區域比較小一點,但是所失敗的範圍是不同 請問是哪邊有問題 是有百分比錯誤和其他的,原因是重疊率不夠嗎
  • Image positions and orientation

    Hi, I have been using the ContextCapture for a well, for my project, I would like to output the image positions and orientation after the ContextCapture doing the aerial triangulation process. Could some one help me on how to get this information…
  • Hi i have a problem with the colour of my model ( 3MX processing)

    Hi....i have a problem with my 3D modelling...the colour of my 3d modelling are not same with original colour...anyone can help me to solve this problem?