Hi, sorry for my english, my first language is spanish. i want to know what hardware part of pc is the most important to make a quickly process!, SSd, ram, cpu, board and /or gpu?????? with context capture! i have this computer: 2 Xeon Silver 4208 2…

I've been searching the forum and read all the manuals avalible for Context Capture Master and the process of aerotriangulation and productions of orthophotos. But I'm still uncertain on how the process should be conducted in order to achive best result…

I'm desperately searching for a page I've recently seen on the forum (or was it the Wiki?), describing the maths and process on how to determine a good distance between GCP;s on a large land survey project. - Is there anyone out there who know what…

For our ContextCapture projects we have two customers. One customer needs Nad83(2011) NCSP NAVD88 Geoid 18 (xyz units us survey foot), the other customer needs Local Space Rectangular. The difference between the two SRS's is normally a scale factor. Knowing…

Hi, I use Dji Phantom 4 RTK for mapping surveying. I have problem with aerial dataset, when i import photos of 1400 meters length road and start AT, it becomes curved. I tried this solution https://communities.bentley.com/products/3d_imaging_and_point_cloud_software…

Hi, Just a quick question and apologies if I have missed this in the forum. Is Context Capture Master able to perform the aero triangulation stage using both portrait and landscape orientated images in the same dataset? When running a job it wants to…

Is there any benefit to processing one set of pictures then adding more pictures and processing again? does it keep the original main component and add to it or does it start over completely? I am asking because I am trying to get pictures from an XT2…

Hello, Does anyone have a workflow recommendation for combining photographs with point cloud data? I'm trying to make a reconstruction of a room using photos to capture the details and the point cloud will help with the plain white walls. I am using…

Hi, I have a set of images with accurate image pose acquired by RTK GPS. I imported the images and image position and it looks good. Then I ran Aerotriangulation with adjustment setting to hold image position and it fails to hold the image position. Any…

I'm using Sony A7R II with 28mm lens and I'm curious why my focal length change slightly? it's a prime lens and manufacturer spec says it's 28mm and the aero-triangulation optimized the focal length in the range of 27.13mm - 27.20mm for different photogroups…

Today I´ve benn trying to procces the AT in a block of 932 pictures, but always that I start the AT it seems like CC will start it but it inmediatly fails and the CCEngine gives "[2020-Mar-11 23:51:16] Error: task failed (returned : 1)". Please help with…

Bentley Reality Modeling SIG: ContextCapture CONNECT Edition – Update 15 Host: Casey Bentley, Application Engineer - Reality Modeling, Bentley Systems, Inc. Date/Time: 06 February 2020 - 02:00 P.M. EST Register Now Get up to speed on the latest…

I'm having trouble aligning a photo dataset to a LiDAR pointcloud that was taken at the same time. Is there any better guides (more detailed than the 3 min example on youtube) or detailed settings i should be using? (suspect its spatial coord issue…

Hello, help deal with the problem. After aerotriangulation, most of the photos were not determined. In the Acquisition Report writes that: disconnected photos - 60%. In the Surveys tab, writes that the photo is not calibrated. And this problem concerns…

We acquired high definition imagery along both sides of a roadway in order to produce a model. We were able to process the imagery with GCPs using several different settings. Each time we got the same result of a rippling or bumpy effect on the road surface…

I want to do aerotraingulation of 20,000 aerial images taken with sony a6000 Camera, 20MP camera. How to complete this process. Please suggest?

I have 359 Geo-referenced images. These were taken from Drone with Nadir pose in straight line. All photos facing downwards. After aerotrigulation from context capture, those photos are aligned in a circular arc instead of straight path which is the actual…

Hello Everyone, I am testing Context Capture for processing large number of UAV images. I currently have 90 Gigapixel and 150 Gigapixels size dataset. I want to process that in context capture. I have submitted all images(90 gigapixels) for aerotriangulation…

I have a project that has nearly 6000 images. I am trying to do aerotraigulation on that without any sub-block. My pc got hung in pairs matching (25%) step of aerotriangulation. Do I have to do Aerotiangulation in sub-blocks? Previously I was using PIX4D…

AT setting for Component construction mode there is a setting for "one pass" or "multi pass". Just now I was reprocessing some of the previous jobs that were done at "one pass" before. Now I run them with "multi pass" setting. I noticed a reasonable…

Hi All, I have noticed in the later stages of AT that my computer's resources are not being used to their fullest. I have an i7 5700 with a GTX 1080 GPU and 32GB ram. The project in question is 34gigpixels (2036 images). The AT sat at 64% for 3hours…

Can ContextCapture Center aerotriangulate using multiple Engines to speed up the processing? I found in the ContextCapture User manual underneath the ContextCapture Engine section that you can specialize the Engines . It says by default the Engine…

Join Benoit Fredericque and Arnaud Durante online Thursday, October 27, for the next Bentley Reality Modeling Special Interest Group (SIG) workshop, Optimize Your Cluster and Hardware Configuration . Register today and invite your colleagues! Complimentary…

Hi! I'm testing the accuracy of the photogrammetry process. So I use GCP and check point (CP). When I use only GCP the aerial triangulation's error is not relevant and the result is good but when i use GCP and CP the CP's error is higher than GCP's…