ContextCapture | Descartes | Pointools | Orbit
By highest score
Ideas you submitted
Ideas you voted on
With any status
With any open status
With any closed status
With held votes
Currently 'Under Review'
Currently 'Future Consideration'
A problem that disturb me for a month.
Hello guys, Here has a problem that disturb me for a month need you guys' help. When I run the Context Capture, no matter what data I use, it always shows Aerotriangulation failed at the beginning of the process. And the log just shows false without...
Tue, Nov 24 2020 10:08 PM
Adopt circular coded & uncoded (RAD) markers for better registration
Circular targets offer better subpixel accuracies and are easier to read than QR codes. This should be introduced within the software to allow better registration and more accurate results. Also detecting them from the pictures before AT would remove...
Tue, Jul 21 2020 8:39 AM
Help! Operation failed.
您好！我在计算模型的时候，很多tile总是计算到百分七八十以后失败，提示的是operation failed，换了好几个测试区域都会出现tile失败的问题，这里附上我的log file,麻烦帮忙看看可能是什么问题。万分感谢！ YongTai20200526_S3c - Tile_+017_+002.zip
Wed, May 27 2020 2:57 AM
你好 请问工程师 我的三维重建发生了错误
如图所示 我的计算机闪存是50GB以上，我设置的分割块闪存是18GB 但是仍然告诉我内存不足 存储硬盘空间也很充裕 闪存也很充裕
Thu, Apr 30 2020 7:48 AM
On CC Editor - Capability to make a ground extraction based on multiple Reality Meshes
Jacques - McKit
Today we are able to create a ground extraction process on CC Editor based on only one reality mesh. It could be a good Idea to be able to make ground extraction based on multiple georeferenced meshes instead of only one.
Wed, Jan 8 2020 11:17 AM
重叠度纵向89 横向91 行高130米 无人机型号大疆御2pro 拍摄倾斜摄影 模型质量很低
Sat, Dec 7 2019 9:47 PM
Detect QR Codes and Tags BEFORE aerotriangulation to set constraints
I want to be able to detect specifically April tags and set constraints before aerotriangulation so that the camera positions are accurate before reconstruction. I have a requirement to export the scaled camera positions but this doesn't seem possible...
Wed, Sep 11 2019 6:20 AM
AT pair selection modes for multiple photo groups
Hello. It would be helpful if the "sequential", "loop" settings in the "Pair Selection" option in air triangulation(AT) could be extended to work on rigs of multiple cameras. Currently these options are only available if the block has a single photo...
Tue, Sep 3 2019 10:57 AM
[Contextcapture] point cloud size limit
The current 500M points size limit in ContextCapture non-Center edition is too low. This is helping Autodesk Recap sales as in case when large merged E57 point cloud(exported from ReCap) is received from surveyors(with one building as interior and exterior...
Fri, Aug 23 2019 3:42 AM
Recreate an AT+ production based only with the added new photos
Jacques - McKit
Some times on the working process we need to add photos in order to have a better model, or in order to replace bad ones. in a case that we already create a model we need to recreate all the model again. It could be nice and time saving if we could...
Thu, Aug 22 2019 12:44 PM
Context Capture : Orthophoto production format
It could be great to have the ability to generate directly ECW and/or JPG2000 tiles instead of TIF tiles that consume a lot a space. An option to fuse all the tiles in one file would be a must!
Tue, Jun 4 2019 9:48 AM
[Contextcapture] Fix 3D viewer rotation glitch
When we could expect fix for the annoying rotation glitch(pan-rotate-pan results in unexpected model flip) in vertical view when using Acute3D or Contextcapture 3D view? see video
Mon, May 27 2019 10:20 AM
Reconstruction from panoramic photos
Hello, It will be great to be abble to remodel mesh or point clouds from panoramic photos. it is possible for some other software, so i would be nice to be as powerfull as otherone an use photos from google street view or Iris 360. For exemple, the...
Fri, May 10 2019 10:39 AM
New graphics card causes ContextCapture Engine to crash
I installed the NVidia Titan RTX graphics card into my machine and now the ContextCapture Engine closes after it opens up when running a .LAS production. Has anyone seen this with any other graphics card?
Fri, Feb 1 2019 6:45 PM
I can not perform aerotriangulation
Hi, i have a problem wiht aerotriangulation step. Context Capture Master gives error Error: task failed (returned : -1073741819) In my project i have 257 images an 5 gcp
Wed, Nov 7 2018 9:17 AM
contextcapture popup info window needed
hi, when i use context capture to generate web 3d mesh,web ready interface doesn't support add marker or popup info window to my model,sometimes we need to mark a building or popup a infowindow to show detail text to my customer.can you add this function...
Wed, Oct 31 2018 2:38 AM
Option to add camera parameter along with image position alignment module to avoid aerotriangulation?
I have already aligned images in 3rd party photogrammetric software(AT completed). I have accurate camera calibration information and image position details (LPS blockfile, Inpho PRJ file etc). I need camera and image position import parameter option...
Fri, Oct 19 2018 3:21 AM
Delete unwanted tie points?
After triangulation, unwanted tie points can be deleted using fence selection option in 3D tab.
Fri, Oct 19 2018 2:24 AM
Add a tools to export/import tiling settings so to do fast and easily a new reconstrution using the same boundary and tiling that will be usefull in case you have to merge or replace tile.
Mon, Oct 15 2018 5:13 AM
Able to produce 3D Mesh within polygon boundary, not depend to rectangular grid tiles.
Tue, Oct 2 2018 4:10 AM
Creating contours with ContextCapture
Hi, I am General Manager in a Bentley's Peruvian Channel Partner, one of our prospect client, uses P4D but is trying a temporary licence from ContextCapture Connect Edition, update9-v126.96.36.1996 for migrating Bentley soft, but they talk that one of all...
Thu, Jun 28 2018 3:39 PM
Add a mask tool inside CC
It will be usefull have a simple editor inside CC to create photo mask easily and faster .
Thu, May 24 2018 6:03 AM
CC mobile app issue - 3D model processing failed
I downloaded the CC app for android. Walked out to the parking lot and took some pics. I get the error below when submitting the photos for modeling. Any ideas on this issue? Cliff
Tue, Feb 27 2018 1:10 PM
Photo file name in Acquisition Report
When an issue has been identified and not all photos are connected the report just show the photo not connected in main component. Could be more useful have the photo file name aren't connected so you can easily find it and add some tie point if possible...
Fri, Feb 23 2018 5:57 AM
ContextCapture - 3D view Measurements dialog units choices
The default measurement system displayed such as Metric or Imperial should be based on that used in the Spatial reference system. Allow user the option to select the units/system of measure to be displayed, such as ftUS, inches, meters, centimeters...
Thu, Aug 31 2017 7:47 PM
Secure File Upload
Support and Services
Subscription Services Portal
Training and Learning
About Bentley Institute
My Learning History
© 2021 Bentley Systems, Incorporated