• RAM configuration

    Hello, I am upgrading my setup to run render for ContextCapture. I was wandering if I need 128Gb of RAM. I read that 128Gb is only interesting for processing ultra-large blocks of photos. Is a 300 Gigapixels block relate to that? Also, what is…
  • can't save screenshot from 3D viewer

    Hello there, I'm trying to save a screenshot from the contextcapture Acute 3D viewer (a 3mx file). All gos well, it gets me to the stage of choosing a folder to save in, and all looks normal. But after pressing "save", there's nothing in the folder…
  • Issue with OpenRoads Designer reading the georeference of my 3mx file.

    I'm attempting to bring a .3mx file into ORD so that I may convert it into a TIN file. I'll explain my steps as well as where the error with georeferencing begins, along with some screen shots. 1) Create a .3mx file, with the Production set to export…
  • 3MX file geo-referencing incorrectly into Microstation

    I'm trying to reference a 3mx file into Microstation. The mesh comes in with Easting and Northing both too large by a factor of 3.281... Living in North Carolina, I am using the GCS NAD83 EPSG:2264. This GCS is in USft. My microstation drawing and my…
  • How to Check Node System engine is utilized for 3D reconstruction in context capture center grid computing?

    Dear All, I have installed Context Capture center ( Engine+Master ) in 3 system interconnected in same LAN. They are running windows10 pro 64 bit. I shared the JOB through network mapping. How i know node system utilized for 3D reconstruction. Thank…
  • Ripples and Bumps on Road in Aerial Model From ContextCapture

    We acquired high definition imagery along both sides of a roadway in order to produce a model. We were able to process the imagery with GCPs using several different settings. Each time we got the same result of a rippling or bumpy effect on the road surface…
  • Problem with 3MX mesh model generation in ContextCapture. The cameras and GCPs in the Pruduction appears to be on a line.

    Hello, I have issues with generating 3MX mesh model in ContextCapture. The Aerotriangulation phase is finished succesfully, I also use GCPs. In the reconstruction, the model still looks ok. (picture 1) The Production phase is completed without any…
  • Merging OBJ tiles for export to LumenRT

    I have created a 3d model in contextcapture in 3mx format and OBJ format. Because of the RAM usage per job, I made tiles for the production. I want to export this model to LumenRT. When i try to export the 3mx from Microstation to LumenRt, it does not…
  • Height Discrepancy when bring ContextCapture into ConceptStation

    I am trying to bring in a ContextCapture model, that is geo-referenced to the SRS of WGS 84 / UTM zone 17N, into ConceptStation. The problem is when I attach the 3D model into ConceptStation there is a vertical discrepancy of about 50 feet. The x and…
  • Failed to Submit Production

    I am trying to submit a new production on a project a coworker started. However, the software does not allow me to submit a production because it is looking for his job queue directory. Is there a way to change this setting so it recognizes my CC engine…