Hi, sorry for my english, my first language is spanish. i want to know what hardware part of pc is the most important to make a quickly process!, SSd, ram, cpu, board and /or gpu?????? with context capture! i have this computer: 2 Xeon Silver 4208 2…

I've been searching the forum and read all the manuals avalible for Context Capture Master and the process of aerotriangulation and productions of orthophotos. But I'm still uncertain on how the process should be conducted in order to achive best result…

We collect thousands of photos from our municipality with our little drone and our goal is to create survey grade ortophotos and a presentable 3D model for the web. When adding the photos to Context Capture I assume camera data would be the same for all…

Hello CC community, When solving AT, it is difficult to measure GCPs for the Large Format Aerial Images. Drone images are zoomed in to pixel size to measure GCPs. But I have trouble to measure GCPs to solve AT for the Large format images as IGI…

For our ContextCapture projects we have two customers. One customer needs Nad83(2011) NCSP NAVD88 Geoid 18 (xyz units us survey foot), the other customer needs Local Space Rectangular. The difference between the two SRS's is normally a scale factor. Knowing…

Hi. I recently updated to U18 and I've been hàving issues with AT. I'm using a drone to map areas and ever since updating many photos end up with wildly wrong positioning. Since I'm using the drone's gps for positioning however, the positioning isn…

Hi Bentley communities, We are using Bentley context capture software's for past couple of years, Unfortunately we got some issues recently while processing point cloud in Context capture master. We got continuous error as a Engine failure while processing…

Hi Bentley Communities, I am reaching out to see if anyone can help with the below problem. Essentially we are having problems transforming our data sets from WGS84 to MGA2020. We are capturing photos with a P4 RTK Drone connected to the CORS network…

Hi, I use Dji Phantom 4 RTK for mapping surveying. I have problem with aerial dataset, when i import photos of 1400 meters length road and start AT, it becomes curved. I tried this solution https://communities.bentley.com/products/3d_imaging_and_point_cloud_software…

Hi everyone, Im trying to realize an AT of a block with 910 but I'm getting an error when matching key points, the proccess stalls at 75% and the engine's message is: [2021-Mar-01 10:27:24] Error: task failed (returned : -1073741819). Ther is happening…

Let's say I'm modelling an object which has 5 m in length and width and 3 m in height but I don't have any gps data. Is it possible to add these measurements after the model was completed? I don't know any GPS control points in the area and when I run…

"Houston, we have a problem" I think the new update broke ContextCapture, because with the old update I had oriented 68 images without any problem, and now with the new update and using the same settings and the same images the software only orients…

I created a project. I went to Tools and saw that April tags need to be at least 35x35 pixels. If I am flying a job with a Phantom 4 RTK at an altitude of 71m AGL that gives me a GSD if 1.95 cm/px If we calculate that out to 35px by 35px that gives us…

Dear Bentley Community, Usually everything is working fine until the last aerotriangulation... the engine is stuck with one process. The percentage progression starts an endless loop from 66% to 74% and again 66% to 74% and again and again... The…

Hello, this message follows the problem of AT processing with integration of facade photos. I have integrated Tie Points and control points common to both groups of photos. I have selected the "tie points" and "control points" adjustments I applied "high…

hello, I encounter a difficulty during the aerotriangulation stage on photos of facades. My competitor on PHOTOSCAN with the same photos manages to have a successful calculation and a coherent global rendering. Here is the link to report the result which…

I have photos from an XT2 that I can't get to process. There must be some trick to it that I can't figure out. We flew the site at 90% overlap and it looks like there is plenty of overlap but they will not process. Do I need accurate camera/lens properties…

Hello, Does anyone have a workflow recommendation for combining photographs with point cloud data? I'm trying to make a reconstruction of a room using photos to capture the details and the point cloud will help with the plain white walls. I am using…

I have a project with sUAS photos and GCP's. I submitted Aerotriangulation, in the NAD83(2011) EPSG6447 projected coordinate system, with adjustment constraints on the control points only. All looks great and it is georeferenced. My issue is when creating…

Today I´ve benn trying to procces the AT in a block of 932 pictures, but always that I start the AT it seems like CC will start it but it inmediatly fails and the CCEngine gives "[2020-Mar-11 23:51:16] Error: task failed (returned : 1)". Please help with…

I'm flying a corridor that's approximately 2100ft x 387ft and I'm running into some issues with aerotriangulation and production results. I flew nadir pose with 75% front and side overlap at an altitude of 100 ft (restricted airspace), and came up with…

Bentley Reality Modeling SIG: ContextCapture CONNECT Edition – Update 15 Host: Casey Bentley, Application Engineer - Reality Modeling, Bentley Systems, Inc. Date/Time: 06 February 2020 - 02:00 P.M. EST Register Now Get up to speed on the latest…

I've been using ContextCapture Cloud for a while now, and there are some key functions I'm missing in the software as it is today. I’ve made a list of functions I see as key to optimize the workflow. The possibility to change coordinate system before…

I'm having trouble aligning a photo dataset to a LiDAR pointcloud that was taken at the same time. Is there any better guides (more detailed than the 3 min example on youtube) or detailed settings i should be using? (suspect its spatial coord issue…

Is there any good documentation or videos on how to interpret the various components of the aerial triangulation report ? Farouk Rohoman