• 3D model not matching with input

    Hi, I have a 3D model which was modelled from pointcloud in POD format. The modelling was done in Descartes. But when it was finally checked against the input pointcloud in another format e57 it was having a shift in xy. What might be the reason and…

  • Migrating from V8i SS4, PROBLEMS

    Greetings all, My Co. are just starting to use Bentley Connect and Descartes after extensively using V8i SS4 Versions of these products There seems to be issues with: Creating clips - The point cloud completely disappears? Viewing Point Cloud sections…

  • RE: Point Clouds for a newbie

    You can use Descartes "Smart Snap" to select the highest point along the top of rail to trace the rails or the 3D line follow tool if you have intensities to your point cloud. This will give you a rough horizontal alignment. fyi- InRoads ss3 has a …

  • Descartes SS4 + NVidia crash

    Hi all, I got a new laptop and installed Descartes SS4 straight away. To my dismay when drawing with a POD loaded, the display driver kept stopping about every 10-20 seconds. Screen goes black, then recovers and goes back to normal, only about 2-3…

  • Converting point clouds to PODs

    There are quite a few settings to think about when converting to POD format. They are not all obviously useful, but each is there for a reason. Each point cloud format is designed to serve the need of it’s creator, and often the hardware with which it…
Communities
Support and Services
Training and Learning
Social Media