Alguien tiene el archivo XML para poder detectar objetos 3D y 2D en un modelo?. El archivo que se carga en el video del enlace https://www.youtube.com/watch?v=aDYYuBaxfnU Muchas gracias de antemano

I have a DGN in which I have a reality model (3SM) and a number of 3D shapefiles. The shapefiles have a number of different attributes. Does anyone know if it is possible to turn on 3D labels that link to one more of the attributes of the shapefiles?…

Hi All I have calculated a 3D mesh from a drone capture. Now, in this mesh i would like to import a 3D model, i have drawn in 3DS max (Antenna) and afterwards export it to a 3MX file. Does anyone know, if this is possible? I have tried to do it through…

I have been attempting to export façade GeoTIFF’s from a 3sm model in ContextCapture Editor and for some reason the TIF’s are coming out completely black. I’m wondering if any of you have run into this problem or if you may know a solution. I’m not sure…

如题，用acute3d软件可以打开实景文件，但是当用ms参考该实景模型时无法显示出来。

When im trying to create new construccion, the process is on a loop where i receive a msg "Failed to Copy log file from C:/....../ with error code: 3. How can i fix this, what is creating this error? why this happens only sometimes. Thanks.

Hi everyone, As I am quite new into Bentley, could you please help here? I did the 3D mapping of the old church using P4ProV2 and did processing in ContextCapture. Two sides of the church got reconstructed quite good While the other two have gaps blurry…

In this model the seed points created do not touch the ground, they are above or below the surface of the model, they are usually groups of three points only aligned at several places of the model away from each other. Next, there are the seed points…

Hi Team, I have noticed recently that my CCEngine now displays error messages as below when running an AT. I'm not certain what is causing this error or whether it is impacting the processing time. Has anyone else found this since updating to V17…

Good morning everyone, so im working on 3 projects right now and pulling my hair out as I go. One of my jobs its showing that 450 out of 851 photos are not calibrated. Im using DJI P1 camera to do this job. This is the Smaller of the 3 jobs i tried…

In ORD Reality Modeling when I have a point cloud loaded and the Reality Model Presentation box open to the Sections tab and attempt to either use key-ins or the buttons to move a quick section forward/backward/rotate I get a pause and the spinning cursor…

Using Descartes in V8i I had keyins setup to move forward/backward/rotate and create a new quick section using F1-F4. In ORD, the keyins for moving forward/backward/rotating seem to work, but the keyins for creating quick sections do not work. I get…

Let's say I'm modelling an object which has 5 m in length and width and 3 m in height but I don't have any gps data. Is it possible to add these measurements after the model was completed? I don't know any GPS control points in the area and when I run…

I am trying to create a raster to have a 2D image of my project i can place into an ORD file. However when I try to create a raster under Ortho/DSM as a .tiff file, my images are coming out black and white, they look more like an ink blot. I created the…

Hello, Does anyone have a workflow recommendation for combining photographs with point cloud data? I'm trying to make a reconstruction of a room using photos to capture the details and the point cloud will help with the plain white walls. I am using…

Hello. I saw this video and have some question. https://youtu.be/pjyr-lDON5g I can delete car from parking or cloverleaf crossing and make flat surface instead car. How can I copy textures from nearest squares to close untextured mesh to make…

Title: SIG Virtual Workshop: Reality Modeling for North America - Using Reality Data with the iModelHub Date/Time: 06 August 2020 02:00 P.M. EDT Presenter: Casey Bentley, Application Engineer, Reality Modeling, Bentley Systems, Inc. Register Now …

Title: SIG Virtual Workshop: Reality Modeling for EMEA - Introduction to OpenCities Planner for ContextCapture Users Date/Time: July 7, 2020 8:00 A.M. BST Presenter: Faraz Ravi, Director, Reality Modeling Technical OEM Partnerships, Bentley Systems, Inc…

Title: SIG Virtual Workshop: Reality Modeling for North America - Introduction to OpenCities Planner for ContextCapture Users Date/Time: July 2. 2020 2:00 P.M. EDT Presenter: Casey Bentley, Application Engineer - Reality Modeling, Bentley Systems, Inc…

My school is undergoing a campus modeling project and we only have a cheap VLP-16 LIDAR puck scanner that we have been able to use and process through KAARTA. Because of the minimalistic setup, there is no GPS on the unit and no geographical reference…

Bentley Reality Modeling Special Interest Group for North America: Introduction to OrbitGT for ContextCapture Users Presenters: Casey Bentley and Jeroen Vermeulen, Bentley Systems, Inc. June 4, 2020 at 2:00 PM EDT Register Now The Reality Modeling…

Title: SIG Virtual Workshop: Reality Modeling – Introduction to OrbitGT for ContextCapture Users Date: June 9, 2020 8:00 A.M. BST Presenter: Faraz Ravi Director, Reality Modeling Technical OEM Partnerships, Bentley Systems, Inc. Register Now …

Hi, I have a set of images with accurate image pose acquired by RTK GPS. I imported the images and image position and it looks good. Then I ran Aerotriangulation with adjustment setting to hold image position and it fails to hold the image position. Any…

I'm using Sony A7R II with 28mm lens and I'm curious why my focal length change slightly? it's a prime lens and manufacturer spec says it's 28mm and the aero-triangulation optimized the focal length in the range of 27.13mm - 27.20mm for different photogroups…

Is there any way to predetermine the Home Position of a Reality Mesh in Context Capture?