How to use Copy, Cut and Paste in Bentley Descartes for MicroStation

fmcallis — Thu, 20 Oct 2016 21:12:24 GMT

Current Revision posted to ContextCapture | Descartes | Pointools | Orbit Wiki (Türkçe) by fmcallis on 10/20/2016 9:12:24 PM

	Product(s):	Bentley Descartes for MicroStation
	Version(s):	08.11.09.601
	Environment:	N\A
	Area:	Tools
	Subarea:	Edit

Problem

How do I copy or cut data in one raster image and place the data that has been cut or copied into a different raster image

Solution

In Descartes data that is in one raster image can be copied or cut in one raster image and then place into a different raster image.

1.) In Raster Manager select Edit

2.) Highlight source raster image containing area to be copied or cut

3.) Select either copy or cut command

4.) Place a fence or block around the area to be copied or cut

· Copy command will make a copy to data that is in the fence or block area

· Cut will cut the area that in the fence or block area and remove it from the raster image

5.) Accept

6.) Highlight destination raster image where data is to be pasted

7.) Select Raster Manager > Edit

8.) Select Paste

9.) Drag copy or cut area to location in destination raster image to where it to be placed

10.) Left mouse click to Accept

11.) Right mouse click to Reset

See Video

https://youtu.be/-cQBRlMkbb8

Video demonstrates how to use the Copy, Cut and Paste commands in Bentley Descartes for MicroStation. The key to using the commands is to highlight the appropriate Source and Destination raster images when you use the Copy, Cut and Paste commands.

Original Author:

Frank McAllister

Tags: Descartes, 08.11.09.601, Bentley Descartes for MicroStation, edit, en, SELECTsupport, Tools