Fit Cylinder - One Click Mode

Pascal Cloutier — Thu, 19 Mar 2020 12:25:56 GMT

Current Revision posted to ContextCapture | Descartes | Pointools | Orbit Wiki by Pascal Cloutier on 3/19/2020 12:25:56 PM

The Fit Cylinder functionality now has a new mode which works allows user to extract cylinder by only clicking a point of the point cloud modeling the cylinder to extract.

The One Click Mode works by following the points pertaining to the cylinder from both direction from the point clicked until the end of the cylinder is encounter (for example when an elbow or a pressure vessel is encounter) or until there is not enough points to continue (for example if part of the cylinder is occluded).

Here is a short video showing how easy it is to extract cylinder of various diameter just by one click :

communities.bentley.com/.../FitCylinderONeClickRMSError.mp4

Functional Tip : Note that the one click mode tool works only when a point is clicked (i.e. : you need to snap on a point of the point cloud in order to extract cylinder.

Performance Tip : For minimizing extraction failure choose a point which is near a part of the cylinder represented by a lot of point cloud's points and is as far as possible as other component(s) connecting to the cylinder to extract, if any.

Maximum RMS Error

The Maximum RMS Error setting can have an important impact on the precision extracted. The maximum RMS error is related to the distance of the points from the extracted cylinder. During the fit cylinder operation the points whose distance is less than the maximum distance between the point and the surface of the potential cylinder model are deemed pertaining to the cylinder, and thus used during the modelling of the cylinder.

The video below shows how the Maximum RMS Error can affect the precision of the extracted cylinder.

communities.bentley.com/.../FitCylinderONeClickRMSError.wmv

Performance Tip : There is a compromised to be made when setting the Maximum RMS Error. A big value will optimize the chance of finding a cylinder, at the cost of less precision, while a small value will optimize the precision of the cylinder extracted, at the higher failure rate.

Tags: Descartes, Fit Cylinder

Fit Cylinder - One Click Mode

Jesse Dringoli — Wed, 09 Mar 2016 20:38:20 GMT

Revision 10 posted to ContextCapture | Descartes | Pointools | Orbit Wiki by Jesse Dringoli on 3/9/2016 8:38:20 PM

The Fit Cylinder functionality now has a new mode which works allows user to extract cylinder by only clicking a point of the point cloud modeling the cylinder to extract.

Here is a short video showing how easy it is to extract cylinder of various diameter just by one click :

communities.bentley.com/.../FitCylinderONeClickRMSError.mp4

Functional Tip : Note that the one click mode tool works only when a point is clicked (i.e. : you need to snap on a point of the point cloud in order to extract cylinder.

Maximum RMS Error

The video below shows how the Maximum RMS Error can affect the precision of the extracted cylinder.

communities.bentley.com/.../FitCylinderONeClickRMSError.wmv

Tags: Descartes, Fit Cylinder

Fit Cylinder - One Click Mode

Mathieu St-pierre — Sun, 01 Dec 2013 02:24:51 GMT

Revision 9 posted to ContextCapture | Descartes | Pointools | Orbit Wiki by Mathieu St-pierre on 12/1/2013 2:24:51 AM

The Fit Cylinder functionality now has a new mode which works allows user to extract cylinder by only clicking a point of the point cloud modeling the cylinder to extract.

Here is a short video showing how easy it is to extract cylinder of various diameter just by one click :

communities.bentley.com/.../1588.FitCylinderOneClickMode.wmv

Functional Tip : Note that the one click mode tool works only when a point is clicked (i.e. : you need to snap on a point of the point cloud in order to extract cylinder.

Maximum RMS Error

The video below shows how the Maximum RMS Error can affect the precision of the extracted cylinder.

communities.bentley.com/.../FitCylinderONeClickRMSError.wmv

Fit Cylinder - One Click Mode

Mathieu St-pierre — Sat, 30 Nov 2013 10:52:20 GMT

Revision 8 posted to ContextCapture | Descartes | Pointools | Orbit Wiki by Mathieu St-pierre on 11/30/2013 10:52:20 AM

The Fit Cylinder functionality now has a new mode which works allows user to extract cylinder by only clicking a point of the point cloud modeling the cylinder to extract.

Here is a short video showing how easy it is to extract cylinder of various diameter just by one click :

communities.bentley.com/.../1588.FitCylinderOneClickMode.wmv

Functional Tip : Note that the one click mode tool works only when a point is clicked (i.e. : you need to snap on a point of the point cloud in order to extract cylinder.

Maximum RMS Error

The video below shows how the Maximum RMS Error can affect the precision of the extracted cylinder.

communities.bentley.com/.../FitCylinderONeClickRMSError.wmv

Performance Tip :

Fit Cylinder - One Click Mode

Mathieu St-pierre — Thu, 28 Nov 2013 16:24:10 GMT

Revision 7 posted to ContextCapture | Descartes | Pointools | Orbit Wiki by Mathieu St-pierre on 11/28/2013 4:24:10 PM

The Fit Cylinder functionality now has a new mode which works allows user to extract cylinder by only clicking a point of the point cloud modeling the cylinder to extract.

Here is a short video showing how easy it is to extract cylinder of various diameter just by one click :

communities.bentley.com/.../1588.FitCylinderOneClickMode.wmv

Functional Tip : Note that the one click mode tool works only when a point is clicked (i.e. : you need to snap on a point of the point cloud in order to extract cylinder.

Maximum RMS Error

Fit Cylinder - One Click Mode

Mathieu St-pierre — Thu, 28 Nov 2013 14:46:40 GMT

Revision 6 posted to ContextCapture | Descartes | Pointools | Orbit Wiki by Mathieu St-pierre on 11/28/2013 2:46:40 PM

The Fit Cylinder functionality now has a new mode which works allows user to extract cylinder by only clicking a point of the point cloud modeling the cylinder to extract.

Here is a short video showing how easy it is to extract cylinder of various diameter just by one click :

communities.bentley.com/.../1588.FitCylinderOneClickMode.wmv

Functional Tip : Note that the one click mode tool works only when a point is clicked (i.e. : you need to snap on a point of the point cloud in order to extract cylinder.

Maximum RMS Error

Fit Cylinder - One Click Mode

Mathieu St-pierre — Thu, 28 Nov 2013 05:05:08 GMT

Revision 5 posted to ContextCapture | Descartes | Pointools | Orbit Wiki by Mathieu St-pierre on 11/28/2013 5:05:08 AM

The Fit Cylinder functionality now has a new mode which works allows user to extract cylinder by only clicking a point of the point cloud modeling the cylinder to extract.

Here is a short video showing how easy it is to extract cylinder of various diameter just by one click :

communities.bentley.com/.../1588.FitCylinderOneClickMode.wmv

Functional Tip : Note that the one click mode tool works only when a point is clicked (i.e. : you need to snap on a point of the point cloud in order to extract cylinder.

Maximum RMS Error

Fit Cylinder - One Click Mode

Mathieu St-pierre — Thu, 28 Nov 2013 04:59:02 GMT

Revision 4 posted to ContextCapture | Descartes | Pointools | Orbit Wiki by Mathieu St-pierre on 11/28/2013 4:59:02 AM

The Fit Cylinder functionality now has a new mode which works allows user to extract cylinder by only clicking a point of the point cloud modeling the cylinder to extract.

Here is a short video showing how easy it is to extract cylinder of various diameter just by one click :

communities.bentley.com/.../1588.FitCylinderOneClickMode.wmv

Functional Tips : Note that the one click mode tool works only when a point is clicked (i.e. : you need to snap on a point of the point cloud in order to extract cylinder.

Fit Cylinder - One-click mode

Mathieu St-pierre — Thu, 28 Nov 2013 04:19:42 GMT

Revision 3 posted to ContextCapture | Descartes | Pointools | Orbit Wiki by Mathieu St-pierre on 11/28/2013 4:19:42 AM

The Fit Cylinder functionality now has a new mode which works allows user to extract cylinder by only clicking a point of the point cloud modeling the cylinder to extract.

Fit Cylinder - One-click mode

Mathieu St-pierre — Thu, 28 Nov 2013 04:18:42 GMT

Revision 2 posted to ContextCapture | Descartes | Pointools | Orbit Wiki by Mathieu St-pierre on 11/28/2013 4:18:42 AM

Fit Cylinder - One-click mode

The Fit Cylinder functionality now has a new mode which works allows user to extract cylinder by only clicking a point of the point cloud modeling the cylinder to extract.

One-click cylinder extraction

Mathieu St-pierre — Thu, 28 Nov 2013 04:17:23 GMT

Revision 1 posted to ContextCapture | Descartes | Pointools | Orbit Wiki by Mathieu St-pierre on 11/28/2013 4:17:23 AM

The Fit Cylinder functionality now has a new mode which works allows user to extract cylinder by only clicking a point of the point cloud modeling the cylinder to extract.