Create XYZ file and Reduce Density

Pascal Cloutier — Thu, 19 Mar 2020 12:20:17 GMT

Current Revision posted to ContextCapture | Descartes | Pointools | Orbit Wiki by Pascal Cloutier on 3/19/2020 12:20:17 PM


	Applies To

	Product(s):	MicroStation
	Version(s):	08.11.09.459
	Environment:	N/A
	Area:	Point Cloud
	Subarea:
	Original Author:	Frank McAllister, Bentley Technical Support Group

Problem Description

User would like to convert their Point Cloud POD file to an XYZ format file and reduce the density of the Point Cloud.

Steps to Resolve

Double click POD file name

In Element Information > Metadata make note of the Number of Points

In MicroStation > Point Cloud highlight POD file

File > Export

In Export Point Cloud box

Change Format to ASCII Files (*.xyz)

Change Density to the value that you want it to be set to

Click OK

Export Point Cloud > Enter the name of the XYZ file that you want to create

If you would like to verify that the Density has changed you can do the following steps:

Point Cloud > File > Convert

Enter XYZ file name that you want to convert

In Convert ASCII Files you can change Spatial Filtering and Spatial Spacing if you chose.

Look at:

http://communities.bentley.com/products/3d_imaging_and_point_cloud_software/w/wiki/13718.best-practices-for-creating-and-working-with-point-cloud-files-in-bentley-products.aspx

Enter file name of the POD file that you want to create

If you double click on the POD file name and in Element Information > Metadata you will see that Number of Points number is smaller.

Tags: SELECTsupport

Create XYZ file and Reduce Density

Felix James — Mon, 01 Dec 2014 15:04:14 GMT

Revision 4 posted to ContextCapture | Descartes | Pointools | Orbit Wiki by Felix James on 12/1/2014 3:04:14 PM


	Applies To

	Product(s):	MicroStation
	Version(s):	08.11.09.459
	Environment:	N/A
	Area:	Point Cloud
	Subarea:
	Original Author:	Frank McAllister, Bentley Technical Support Group

Problem Description

User would like to convert their Point Cloud POD file to an XYZ format file and reduce the density of the Point Cloud.

Steps to Resolve

Double click POD file name

In Element Information > Metadata make note of the Number of Points

In MicroStation > Point Cloud highlight POD file

File > Export

In Export Point Cloud box

Change Format to ASCII Files (*.xyz)

Change Density to the value that you want it to be set to

Click OK

Export Point Cloud > Enter the name of the XYZ file that you want to create

If you would like to verify that the Density has changed you can do the following steps:

Point Cloud > File > Convert

Enter XYZ file name that you want to convert

In Convert ASCII Files you can change Spatial Filtering and Spatial Spacing if you chose.

Look at:

http://communities.bentley.com/products/3d_imaging_and_point_cloud_software/w/wiki/13718.best-practices-for-creating-and-working-with-point-cloud-files-in-bentley-products.aspx

Enter file name of the POD file that you want to create

If you double click on the POD file name and in Element Information > Metadata you will see that Number of Points number is smaller.

Tags: SELECTsupport

Create XYZ file and Reduce Density

Felix James — Mon, 01 Dec 2014 14:58:56 GMT

Revision 3 posted to ContextCapture | Descartes | Pointools | Orbit Wiki by Felix James on 12/1/2014 2:58:56 PM


	Applies To

	Product(s):	MicroStation
	Version(s):	08.11.09.459
	Environment:	N/A
	Area:	Point Cloud
	Subarea:
	Original Author:	Frank McAllister, Bentley Technical Support Group

Problem Description

User would like to convert their Point Cloud POD file to an XYZ format file and reduce the density of the Point Cloud.

Steps to Resolve

Double click POD file name

In Element Information > Metadata make note of the Number of Points

In MicroStation > Point Cloud highlight POD file

File > Export

In Export Point Cloud box

Change Format to ASCII Files (*.xyz)

Change Density to the value that you want it to be set to

Click OK

Export Point Cloud > Enter the name of the XYZ file that you want to create

If you would like to verify that the Density has changed you can do the following steps:

Point Cloud > File > Convert

Enter XYZ file name that you want to convert

In Convert ASCII Files you can change Spatial Filtering and Spatial Spacing if you chose.

Look at:

http://communities.bentley.com/products/3d_imaging_and_point_cloud_software/w/wiki/13718.best-practices-for-creating-and-working-with-point-cloud-files-in-bentley-products.aspx

Enter file name of the POD file that you want to create

If you double click on the POD file name and in Element Information > Metadata you will see that Number of Points number is smaller.

Tags: SELECTsupport

Create XYZ file and Reduce Density

Felix James — Mon, 01 Dec 2014 14:51:55 GMT

Revision 2 posted to ContextCapture | Descartes | Pointools | Orbit Wiki by Felix James on 12/1/2014 2:51:55 PM


	Applies To

	Product(s):	MicroStation
	Version(s):	08.11.09.459
	Environment:	N/A
	Area:	Point Cloud
	Subarea:
	Original Author:	Frank McAllister, Bentley Technical Support Group

Problem Description

User would like to convert their Point Cloud POD file to an XYZ format file and reduce the density of the Point Cloud.

Steps to Resolve

Double click POD file name

In Element Information > Metadata make note of the Number of Points

In MicroStation > Point Cloud highlight POD file

File > Export

In Export Point Cloud box

Change Format to ASCII Files (*.xyz)

Change Density to the value that you want it to be set to

Click OK

Export Point Cloud > Enter the name of the XYZ file that you want to create

If you would like to verify that the Density has changed you can do the following steps

Point Cloud > File > Convert

Enter XYZ file name that you want to convert

In Convert ASCII Files you can change Spatial Filtering and Spatial Spacing if you chose.

Look at:

http://communities.bentley.com/products/3d_imaging_and_point_cloud_software/w/wiki/13718.best-practices-for-creating-and-working-with-point-cloud-files-in-bentley-products.aspx

Enter file name of the POD file that you want to create

If you double click on the POD file name and in Element Information > Metadata you will see that Number of Points number is smaller.

Tags: SELECTsupport

Create XYZ file and Reduce Density

Felix James — Mon, 01 Dec 2014 14:45:50 GMT

Revision 1 posted to ContextCapture | Descartes | Pointools | Orbit Wiki by Felix James on 12/1/2014 2:45:50 PM


	Applies To

	Product(s):	MicroStation
	Version(s):	08.11.09.459
	Environment:	N/A
	Area:	Point Cloud
	Subarea:
	Original Author:	Frank McAllister, Bentley Technical Support Group

Problem Description

User would like to convert their Point Cloud POD file to an XYZ format file and reduce the density of the Point Cloud.

Steps to Resolve

Double click POD file name

In Element Information > Metadata make note of the Number of Points

In MicroStation > Point Cloud highlight POD file

File > Export

In Export Point Cloud box

Change Format to ASCII Files (*.xyz)

Change Density to the value that you want it to be set to

Click OK

Export Point Cloud > Enter the name of the XYZ file that you want to create

If you would like to verify that the Density has changed you can do the following steps

Point Cloud > File > Convert

Enter XYZ file name that you want to convert

In Convert ASCII Files you can change Spatial Filtering and Spatial Spacing if you chose.

Look at:

http://communities.bentley.com/products/3d_imaging_and_point_cloud_software/w/wiki/13718.best-practices-for-creating-and-working-with-point-cloud-files-in-bentley-products.aspx

Enter file name of the POD file that you want to create

If you double click on the POD file name and in Element Information > Metadata you will see that Number of Points number is smaller.

Tags: SELECTsupport