Raster image is currently reprojected message when trying to clip a raster

fmcallis — Wed, 11 Nov 2015 17:11:42 GMT

Current Revision posted to ContextCapture | Descartes | Pointools | Orbit Wiki by fmcallis on 11/11/2015 5:11:42 PM

	Product(s):	MicroStation
	Version(s):	08.11.09.608
	Environment:	N\A
	Area:	Raster
	Subarea:	N\A

Problem

I am unable to clip a raster image that has been reprojected. When I ty to clip the raster image I get “Raster image is currently reprojected” message.

Solution

Enhancement # 75391 has been filed. The following steps can be done in Bentley Descartes for MicroStation to resolve the problem. The steps cannot been in MicroStation to resolve the problem.

1. Use Raster Manager to select raster image, right click on it and Save-As. Assign a new name

2. Click the Options button.

3. In the Options section set Resampled to Yes.

4. If you get the option then Set Reprojected to Yes.

The new image is created and attached.

You will now be able to clip your raster image.

If you only have MicroStation and do not have Bentley Descartes for MicroStation you can unprotect the raster image, edit the raster image and then reproject it once it has been clipped. If it requires that your raster image stay in the reprojected location then the following steps will not work.

1) Double click on the raster image name.

2) Under Geometry/Geocoding

a. Make note of the Name and Description

b. (You can reapply this later if needed)

c. (Make note of coordinate system used so you will know what coordinate system when you reproject your raster image)

3) Select the field to the left of Name (Still under Geocoding)

4) Select the icon with the red X through it

5) You can now clip the image

6) Double click on the raster image name.

7) Under Geometry/Geocoding

8) Click Name

9) In drop down > Select Coordinate system

10) Select coordinate system that was used when original reprojection was done

a. Clipped raster image will be reprojected to the location that it was located prior to the clipping being done.

Raster image is currently reprojected message when trying to clip a raster

fmcallis — Wed, 11 Nov 2015 17:10:17 GMT

Revision 4 posted to ContextCapture | Descartes | Pointools | Orbit Wiki by fmcallis on 11/11/2015 5:10:17 PM

	Product(s):	MicroStation
	Version(s):	08.11.09.608
	Environment:	N\A
	Area:	Raster
	Subarea:	N\A

Problem

I am unable to clip a raster image that has been reprojected. When I ty to clip the raster image I get “Raster image is currently reprojected” message.

Solution

Enhancement # 75391 has been filed. The following steps can be done in Bentley Descartes for MicroStation to resolve the problem. The steps cannot been in MicroStation to resolve the problem.

1. Use Raster Manager to select raster image, right click on it and Save-As. Assign a new name

2. Click the Options button.

3. In the Options section set Resampled to Yes.

4. If you get the option then Set Reprojected to Yes.

The new image is created and attached.

You will now be able to clip your raster image.

1) Double click on the raster image name.

2) Under Geometry/Geocoding

a. Make note of the Name and Description

b. (You can reapply this later if needed)

c. (Make note of coordinate system used so you will know what coordinate system when you reproject your raster image)

3) Select the field to the left of Name (Still under Geocoding)

4) Select the icon with the red X through it

5) You can now clip the image

6) Double click on the raster image name.

7) Under Geometry/Geocoding

8) Click Name

9) In drop down > Select Coordinate system

10) Select coordinate system that was used when original reprojection was done

a. Clipped raster image will be reprojected to the location that it was located prior to the clipping being done.

Raster image is currently reprojected message when trying to clip a raster

fmcallis — Wed, 11 Nov 2015 17:06:13 GMT

Revision 3 posted to ContextCapture | Descartes | Pointools | Orbit Wiki by fmcallis on 11/11/2015 5:06:13 PM

	Product(s):	MicroStation
	Version(s):	08.11.09.608
	Environment:	N\A
	Area:	Raster
	Subarea:	N\A

Problem

I am unable to clip a raster image that has been reprojected. When I ty to clip the raster image I get “Raster image is currently reprojected” message.

Solution

Enhancement # 75391 has been filed. The following steps can be done in Bentley Descartes for MicroStation to resolve the problem. The steps cannot been in MicroStation to resolve the problem.

1. Use Raster Manager to select raster image, right click on it and Save-As. Assign a new name

2. Click the Options button.

3. In the Options section set Resampled to Yes.

4. If you get the option then Set Reprojected to Yes.

The new image is created and attached.

You will now be able to clip your raster image.

1) Double click on the raster image name.

2) Under Geometry/Geocoding

a. Make note of the Name and Description

b. (You can reapply this later if needed)

c. (Make note of coordinate system used so you will know what coordinate system when you reproject your raster image)

3) Select the field to the left of Name (Still under Geocoding)

4) Select the icon with the red X through it

5) You can now clip the image

6) Double click on the raster image name.

7) Under Geometry/Geocoding

8) Click Name

9) In drop down > Select Coordinate system

10) Select coordinate system that was used when original reprojection was done

a. Clipped raster image will be reprojected to the location that it was located prior to the clipping being done.

Raster image is currently reprojected message when trying to clip a raster

fmcallis — Wed, 11 Nov 2015 17:00:03 GMT

Revision 2 posted to ContextCapture | Descartes | Pointools | Orbit Wiki by fmcallis on 11/11/2015 5:00:03 PM

	Product(s):	MicroStation
	Version(s):	08.11.09.608
	Environment:	N\A
	Area:	Raster
	Subarea:	N\A

Problem

I am unable to clip a raster image that has been reprojected. When I ty to clip the raster image I get “Raster image is currently reprojected” message.

Solution

Enhancement # 75391 has been filed. The following steps can be done in Bentley Descartes for MicroStation to resolve the problem. The steps cannot been in MicroStation to resolve the problem.

1. Use Raster Manager to select raster image, right click on it and Save-As. Assign a new name

2. Click the Options button.

3. In the Options section set Resampled to Yes.

4. If you get the option then Set Reprojected to Yes.

The new image is created and attached.

You will now be able to clip your raster image.

1) Double click on the raster image name.

2) Under Geometry/Geocoding

a. Make note of the Name and Description

b. (You can reapply this later if needed)

c. (Make note of coordinate system used so you will know what coordinate system when you reproject your raster image)

3) Select the field to the left of Name (Still under Geocoding)

4) Select the icon with the red X through it

5) You can now clip the image

6) Double click on the raster image name.

7) Under Geometry/Geocoding

8) Click Name

9) In drop down > Select Coordinate system

10) Select coordinate system that was used when original reprojection was done

a. Clipped raster image will be reprojected to the location that it was located prior to the clipping being done.

Raster image is currently reprojected message when trying to clip a raster

fmcallis — Wed, 11 Nov 2015 16:31:02 GMT

Revision 1 posted to ContextCapture | Descartes | Pointools | Orbit Wiki by fmcallis on 11/11/2015 4:31:02 PM

	Product(s):	MicroStation
	Version(s):	08.11.09.608
	Environment:	N\A
	Area:	Raster
	Subarea:	N\A

Problem

I am unable to clip a raster image that has been reprojected. When I ty to clip the raster image I get “Raster image is currently reprojected” message.

Solution

Enhancement # 75391 has been filed. The following steps can be done in Bentley Descartes for MicroStation to resolve the problem. The steps cannot been in MicroStation to resolve the problem.

1. Use Raster Manager to select raster image, right click on it and Save-As. Assign a new name

2. Click the Options button.

3. In the Options section set Resampled to Yes.

4. If you get the option then Set Reprojected to Yes.

The new image is created and attached.

You will now be able to clip your raster image.

1) Double click on the raster image name.

2) Under Geometry/Geocoding

a. Make note of the Name and Description

b. (You can reapply this later if needed)

c. (Make note of coordinate system used so you will know what coordinate system when you reproject your raster image)

3) Select the field to the left of Name (Still under Geocoding)

4) Select the icon with the red X through it

5) You can now clip the image

6) Double click on the raster image name.

7) Under Geometry/Geocoding

8) Click Name

9) In drop down > Select Coordinate system

10) Select coordinate system that was used when original reprojection was done

a. Clipped raster image will be reprojected to the location that it was located prior to the clipping being done.

Raster image is currently reprojected message when trying to clip a raster

Raster image is currently reprojected message when trying to clip a raster

Problem

Solution

See Also

Raster image is currently reprojected message when trying to clip a raster

Problem

Solution

See Also

Raster image is currently reprojected message when trying to clip a raster

Problem

Solution

See Also

Raster image is currently reprojected message when trying to clip a raster

Problem

Solution

See Also

Raster image is currently reprojected message when trying to clip a raster

Problem

Solution

See Also