Publish result of a ContextCapture aerotriangulation for the Orbit Photo Navigation

Pascal Cloutier — Wed, 01 Jun 2022 15:40:00 GMT

Current Revision posted to ContextCapture | Descartes | Pointools | Orbit Wiki by Pascal Cloutier on 6/1/2022 3:40:00 PM

In ContextCapture Master or ContextCapture Center Master

1) Select a block resulting from Aerotriangulation.

2) Click the "Export" button and select the "Export to Orbit 3DM" option.

3) Set the "File Name" and "File Location" and ensure that the "Imagery" option is toggled ON.

4) Click the Export button.

In Orbit 3DM Import & Upload Tool

1) Download an install the Orbit 3DM Import and Upload tool.

2) Navigate to the folder that contains the ContextCapture export. In the above example, this folder is at the following location: C:\Projects\Quarry\Quarry Imagery\MappingRun.

3) Drag-and-drop the .omr file found in this folder over the Orbit 3DM Import & Upload Tool' application window.

4) The "Import and Process" section opens. Click "Start Now".

5) When the "Import & Process Run" message box opens, click OK.

6) Click the square button at the bottom-right of the "Import and Process" section to close it.

7) Click the "Optimize Imagery" option under "Aerial Mapping" in the Orbit 3DM Import & Upload Tool' application lower-left corner.

8) Select the desired image Quality and click the "Start Now" button.

9) When the "Optimize" message box opens, click OK.

10) Click the square button at the bottom-right of the "Optimize original images" section to close it.

11) Click the "Catalog" tab.

12) Select the "Aerial" radio button. The Mapping Resource will be listed.

13) Right-click on the Mapping Resouce and select the "Review Image Availability" option from the drop-down menu.

14) Right-click again on the Mapping Resouce and select the "Review Data for 3DM Viewer" option from the drop-down menu.

15) At this point, the indicator in the "3DMV" column should be green.

16) Click the "Extensions" button in the Orbit 3DM Import & Upload Tool's application upper-right corner and select the "ContextShare Upload" option.

17) Click the "Connect" button.

18) Select the destination ProjectWise Project in the "Search projects" drop-down.

19) In the "Action" section, select 'New".

20) In the "Resource" section, select "Catalog Resource".

21) In the "Local Resources" section, select the Mapping Resource that was imported from ContextCapture.

22) In the Upload section, click the "Start Now" button. You can monitor the upload status using the progress bar in this section.

Tags: Reality Data Web Viewer, ProjectWise ContextShare, Orbit 3DM Import & Upload Tool, Orbit Photo Navigation

Publish result of a ContextCapture aerotriangulation for the Orbit Photo Navigation

Pascal Cloutier — Tue, 03 Aug 2021 18:50:14 GMT

Revision 11 posted to ContextCapture | Descartes | Pointools | Orbit Wiki by Pascal Cloutier on 8/3/2021 6:50:14 PM

In ContextCapture Master or ContextCapture Center Master

1) Select a block resulting from Aerotriangulation.

2) Click the "Export" button and select the "Export to Orbit 3DM" option.

3) Set the "File Name" and "File Location" and ensure that the "Imagery" option is toggled ON.

4) Click the Export button.

In Orbit 3DM Import & Upload Tool

1) Navigate to the folder that contains the ContextCapture export. In the above example, this folder is at the following location: C:\Projects\Quarry\Quarry Imagery\MappingRun.

2) Drag-and-drop the .omr file found in this folder over the Orbit 3DM Import & Upload Tool' application window.

3) The "Import and Process" section opens. Click "Start Now".

4) When the "Import & Process Run" message box opens, click OK.

5) Click the square button at the bottom-right of the "Import and Process" section to close it.

6) Click the "Optimize Imagery" option under "Aerial Mapping" in the Orbit 3DM Import & Upload Tool' application lower-left corner.

7) Select the desired image Quality and click the "Start Now" button.

8) When the "Optimize" message box opens, click OK.

9) Click the square button at the bottom-right of the "Optimize original images" section to close it.

10) Click the "Catalog" tab.

11) Select the "Aerial" radio button. The Mapping Resource will be listed.

12) Right-click on the Mapping Resouce and select the "Review Image Availability" option from the drop-down menu.

13) Right-click again on the Mapping Resouce and select the "Review Data for 3DM Viewer" option from the drop-down menu.

14) At this point, the indicator in the "3DMV" column should be green.

15) Click the "Extensions" button in the Orbit 3DM Import & Upload Tool's application upper-right corner and select the "ContextShare Upload" option.

16) Click the "Connect" button.

17) Select the destination ProjectWise Project in the "Search projects" drop-down.

18) In the "Action" section, select 'New".

19) In the "Resource" section, select "Catalog Resource".

20) In the "Local Resources" section, select the Mapping Resource that was imported from ContextCapture.

21) In the Upload section, click the "Start Now" button. You can monitor the upload status using the progress bar in this section.

Tags: Reality Data Web Viewer, ProjectWise ContextShare, Orbit 3DM Import & Upload Tool, Orbit Photo Navigation

Publish result of a ContextCapture aerotriangulation for the Orbit Photo Navigation

Pascal Cloutier — Wed, 26 May 2021 19:51:10 GMT

Revision 10 posted to ContextCapture | Descartes | Pointools | Orbit Wiki by Pascal Cloutier on 5/26/2021 7:51:10 PM

In ContextCapture Master or ContextCapture Center Master

1) Select a block resulting from Aerotriangulation.

2) Click the "Export" button and select the "Export to Orbit 3DM" option.

3) Set the "File Name" and "File Location" and ensure that the "Imagery" option is toggled ON.

4) Click the Export button.

In Orbit 3DM Import & Upload Tool

1) Navigate to the folder that contains the ContextCapture export. In the above example, this folder is at the following location: C:\Projects\Quarry\Quarry Imagery\MappingRun.

2) Drag-and-drop the .omr file found in this folder over the Orbit 3DM Import & Upload Tool' application window.

3) The "Import and Process" section opens. Click "Start Now".

4) When the "Import & Process Run" message box opens, click OK.

5) Click the square button at the bottom-right of the "Import and Process" section to close it.

6) Click the "Optimize Imagery" option under "Aerial Mapping" in the Orbit 3DM Import & Upload Tool' application lower-left corner.

7) Select the desired image Quality and click the "Start Now" button.

8) When the "Optimize" message box opens, click OK.

9) Click the square button at the bottom-right of the "Optimize original images" section to close it.

10) Click the "Catalog" tab.

11) Select the "Aerial" radio button. The Mapping Resource will be listed.

12) Right-click on the Mapping Resouce and select the "Review Image Availability" option from the drop-down menu.

13) Right-click again on the Mapping Resouce and select the "Review Data for 3DM Viewer" option from the drop-down menu.

14) At this point, the indicator in the "3DMV" column should be green.

15) Click the "Extensions" button in the Orbit 3DM Import & Upload Tool's application upper-right corner and select the "ContextShare Upload" option.

16) Click the "Connect" button.

17) Select the destination ProjectWise Project in the "Search projects" drop-down.

18) In the "Action" section, select 'New".

19) In the "Resource" section, select "Catalog Resource".

20) In the "Local Resources" section, select the Mapping Resource that was imported from ContextCapture.

21) In the Upload section, click the "Start Now" button. You can monitor the upload status using the progress bar in this section.

Tags: Reality Data Web Viewer, ProjectWise ContextShare, Orbit 3DM Import & Upload Tool, Orbit Photo Navigation

Publish result of a ContextCapture aerotriangulation for the Orbit Photo Navigation

Pascal Cloutier — Wed, 26 May 2021 19:50:31 GMT

Revision 9 posted to ContextCapture | Descartes | Pointools | Orbit Wiki by Pascal Cloutier on 5/26/2021 7:50:31 PM

In ContextCapture Master or ContextCapture Center Master

1) Select a block resulting from Aerotriangulation.

2) Click the "Export" button and select the "Export to Orbit 3DM" option.

3) Set the "File Name" and "File Location" and ensure that the "Imagery" option is toggled ON.

4) Click the Export button.

In Orbit 3DM Import & Upload Tool

1) Navigate to the folder that contains the ContextCapture export. In the above example, this folder is at the following location: C:\Projects\Quarry\Quarry Imagery\MappingRun.

2) Drag-and-drop the .omr file found in this folder over the Orbit 3DM Import & Upload Tool' application window.

3) The "Import and Process" section opens. Click "Start Now".

4) When the "Import & Process Run" message box opens, click OK.

5) Click the square button at the bottom-right of the "Import and Process" section to close it.

6) Click the "Optimize Imagery" option under "Aerial Mapping" in the Orbit 3DM Import & Upload Tool' application lower-left corner.

7) Select the desired image Quality and click the "Start Now" button.

8) When the "Optimize" message box opens, click OK.

9) Click the square button at the bottom-right of the "Optimize original images" section to close it.

10) Click the "Catalog" tab.

11) Select the "Aerial" radio button. The Mapping Resource will be listed.

12) Right-click on the Mapping Resouce and select the "Review Image Availability" option from the drop-down menu.

13) Right-click again on the Mapping Resouce and select the "Review Data for 3DM Viewer" option from the drop-down menu.

14) At this point, the indicator in the "3DMV" column should be green.

15) Click the "Extensions" button in the Orbit 3DM Import & Upload Tool's application upper-right corner and select the "ContextShare Upload" option.

16) Click the "Connect" button.

17) Select the destination ProjectWise Project in the "Search projects" drop-down.

18) In the "Action" section, select 'New".

19) In the "Resource" section, select "Catalog Resource".

20) In the "Local Resources" section, select the Mapping Resource that was imported from ContextCapture.

21) In the Upload section, click the "Start Now" button. You can monitor the upload status using the progress bar in this section.

Import Image Collection and Orientation in ContextCapture

Open a Mapping Resource Reality Data in the Orbit Photo Navigation

Tags: Reality Data Web Viewer, ProjectWise ContextShare, Orbit 3DM Import & Upload Tool, Orbit Photo Navigation

Publish result of a ContextCapture aerotriangulation for the Orbit Photo Navigation

Pascal Cloutier — Wed, 26 May 2021 19:26:15 GMT

Revision 8 posted to ContextCapture | Descartes | Pointools | Orbit Wiki by Pascal Cloutier on 5/26/2021 7:26:15 PM

In ContextCapture Master or ContextCapture Center Master

1) Select a block resulting from Aerotriangulation.

2) Click the "Export" button and select the "Export to Orbit 3DM" option.

3) Set the "File Name" and "File Location" and ensure that the "Imagery" option is toggled ON.

4) Click the Export button.

In Orbit 3DM Import & Upload Tool

1) Navigate to the folder that contains the ContextCapture export. In the above example, this folder is at the following location: C:\Projects\Quarry\Quarry Imagery\MappingRun.

2) Drag-and-drop the .omr file found in this folder over the Orbit 3DM Import & Upload Tool' application window.

3) The "Import and Process" section opens. Click "Start Now".

4) When the "Import & Process Run" message box opens, click OK.

5) Click the square button at the bottom-right of the "Import and Process" section to close it.

6) Click the "Optimize Imagery" option under "Aerial Mapping" in the Orbit 3DM Import & Upload Tool' application lower-left corner.

7) Select the desired image Quality and click the "Start Now" button.

8) When the "Optimize" message box opens, click OK.

9) Click the square button at the bottom-right of the "Optimize original images" section to close it.

10) Click the "Catalog" tab.

11) Select the "Aerial" radio button. The Mapping Resource will be listed.

12) Right-click on the Mapping Resouce and select the "Review Image Availability" option from the drop-down menu.

13) Right-click again on the Mapping Resouce and select the "Review Data for 3DM Viewer" option from the drop-down menu.

14) At this point, the indicator in the "3DMV" column should be green.

15) Click the "Extensions" button in the Orbit 3DM Import & Upload Tool's application upper-right corner and select the "ContextShare Upload" option.

16) Click the "Connect" button.

17) Select the destination ProjectWise Project in the "Search projects" drop-down.

18) In the "Action" section, select 'New".

19) In the "Resource" section, select "Catalog Resource".

20) In the "Local Resources" section, select the Mapping Resource that was imported from ContextCapture.

21) In the Upload section, click the "Start Now" button. You can monitor the upload status using the progress bar in this section.

Open a Mapping Resource Reality Data in the Orbit Photo Navigation

Tags: Reality Data Web Viewer, ProjectWise ContextShare, Orbit 3DM Import & Upload Tool, Orbit Photo Navigation

Publish result of a ContextCapture aerotriangulation for the Orbit Photo Navigation

Pascal Cloutier — Wed, 05 May 2021 12:37:01 GMT

Revision 7 posted to ContextCapture | Descartes | Pointools | Orbit Wiki by Pascal Cloutier on 5/5/2021 12:37:01 PM

In ContextCapture Master or ContextCapture Center Master

1) Select a block resulting from Aerotriangulation.

2) Click the "Export" button and select the "Export to Orbit 3DM" option.

3) Set the "File Name" and "File Location" and ensure that the "Imagery" option is toggled ON.

4) Click the Export button.

In Orbit 3DM Import & Upload Tool

1) Navigate to the folder that contains the ContextCapture export. In the above example, this folder is at the following location: C:\Projects\Quarry\Quarry Imagery\MappingRun.

2) Drag-and-drop the .omr file found in this folder over the Orbit 3DM Import & Upload Tool' application window.

3) The "Import and Process" section opens. Click "Start Now".

4) When the "Import & Process Run" message box opens, click OK.

5) Click the square button at the bottom-right of the "Import and Process" section to close it.

6) Click the "Optimize Imagery" option under "Aerial Mapping" in the Orbit 3DM Import & Upload Tool' application lower-left corner.

7) Select the desired image Quality and click the "Start Now" button.

8) When the "Optimize" message box opens, click OK.

9) Click the square button at the bottom-right of the "Optimize original images" section to close it.

10) Click the "Catalog" tab.

11) Select the "Aerial" radio button. The Mapping Resource will be listed.

12) Right-click on the Mapping Resouce and select the "Review Image Availability" option from the drop-down menu.

13) Right-click again on the Mapping Resouce and select the "Review Data for 3DM Viewer" option from the drop-down menu.

14) At this point, the indicator in the "3DMV" column should be green.

15) Click the "Extensions" button in the Orbit 3DM Import & Upload Tool's application upper-right corner and select the "ContextShare Upload" option.

16) Click the "Connect" button.

17) Select the destination ProjectWise Project in the "Search projects" drop-down.

18) In the "Action" section, select 'New".

19) In the "Resource" section, select "Catalog Resource".

20) In the "Local Resources" section, select the Mapping Resource that was imported from ContextCapture.

21) In the Upload section, click the "Start Now" button. You can monitor the upload status using the progress bar in this section.

Open a Mapping Resource Reality Data in the Orbit Photo Navigation

Tags: Reality Data Web Viewer, Orbit 3DM Import & Upload Tool, Orbit Photo Navigation

Publish result of a ContextCapture aerotriangulation for the Orbit Photo Navigation

Pascal Cloutier — Wed, 05 May 2021 12:36:15 GMT

Revision 6 posted to ContextCapture | Descartes | Pointools | Orbit Wiki by Pascal Cloutier on 5/5/2021 12:36:15 PM

In ContextCapture Master or ContextCapture Center Master

1) Select a block resulting from Aerotriangulation.

2) Click the "Export" button and select the "Export to Orbit 3DM" option.

3) Set the "File Name" and "File Location" and ensure that the "Imagery" option is toggled ON.

4) Click the Export button.

In Orbit 3DM Import & Upload Tool

1) Navigate to the folder that contains the ContextCapture export. In the above example, this folder is at the following location: C:\Projects\Quarry\Quarry Imagery\MappingRun.

2) Drag-and-drop the .omr file found in this folder over the Orbit 3DM Import & Upload Tool' application window.

3) The "Import and Process" section opens. Click "Start Now".

4) When the "Import & Process Run" message box opens, click OK.

5) Click the square button at the bottom-right of the "Import and Process" section to close it.

6) Click the "Optimize Imagery" option under "Aerial Mapping" in the Orbit 3DM Import & Upload Tool' application lower-left corner.

7) Select the desired image Quality and click the "Start Now" button.

8) When the "Optimize" message box opens, click OK.

9) Click the square button at the bottom-right of the "Optimize original images" section to close it.

10) Click the "Catalog" tab.

11) Select the "Aerial" radio button. The Mapping Resource will be listed.

12) Right-click on the Mapping Resouce and select the "Review Image Availability" option from the drop-down menu.

13) Right-click again on the Mapping Resouce and select the "Review Data for 3DM Viewer" option from the drop-down menu.

14) At this point, the indicator in the "3DMV" column should be green.

15) Click the "Extensions" button in the Orbit 3DM Import & Upload Tool's application upper-right corner and select the "ContextShare Upload" option.

16) Click the "Connect" button.

17) Select the destination ProjectWise Project in the "Search projects" drop-down.

18) In the "Action" section, select 'New".

19) In the "Resource" section, select "Catalog Resource".

20) In the "Local Resources" section, select the Mapping Resource that was imported from ContextCapture.

21) In the Upload section, click the "Start Now" button. You can monitor the upload status using the progress bar in this section.

Open a Mapping Resource Reality Data in the Orbit Photo Navigation

Tags: Reality Data Web Viewer, Orbit 3DM Import & Upload Tool, Orbit Photo Navigation

Publish result of a ContextCapture aerotriangulation for the Orbit Photo Navigation

Pascal Cloutier — Tue, 04 May 2021 20:07:31 GMT

Revision 5 posted to ContextCapture | Descartes | Pointools | Orbit Wiki by Pascal Cloutier on 5/4/2021 8:07:31 PM

In ContextCapture Master or ContextCapture Center Master

1) Select a block resulting from Aerotriangulation.

2) Click the "Export" button and select the "Export to Orbit 3DM" option.

3) Set the "File Name" and "File Location" and ensure that the "Imagery" option is toggled ON.

4) Click the Export button.

In Orbit 3DM Import & Upload Tool

1) Navigate to the folder that contains the ContextCapture export. In the above example, this folder is: C:\Projects\Quarry\Quarry Imagery\MappingRun.

2) Drag-and-drop the .omr file found in this folder over the Orbit 3DM Import & Upload tool application's window.

3) The "Import and Process" section opens. Click "Start Now".

4) When the "Import & Process Run" message box opens, click OK.

5) Click the square button at the bottom-right of the "Import and Process" section to close it.

6) Click the "Optimize Imagery" option under "Aerial Mapping" in the Orbit 3DM Import & Upload tool application's lower-left corner.

7) Select the desired Quality and click the "Start Now" button.

8) When the "Optimize" message box opens, click OK.

9) Click the square button at the bottom-right of the "Optimize original images" section to close it.

10) Click the "Catalog" tab.

11) Select the "Aerial" radio button. The Mapping Resource will be listed.

12) Right-click on the Mapping Resouce and select the "Review Image Availability" option from the drop-down menu.

13) Right-click again on the Mapping Resouce and select the "Review Data for 3DM Viewer" option from the drop-down menu.

14) At this point, the indicator in the "3DMV" column should be green.

15) Click the "Extensions" button in the Orbit 3DM Import & Upload tool application's upper-right corner and select the "ContextShare Upload" option.

16) Click the "Connect" button.

17) Select the destination project in the "Search projects" drop-down.

18) In the "Action" section, select 'New".

19) In the "Resource" section, select "Catalog Resource".

20) In the "Local Resources" section, select the resource that corresponds to the Mapping Resource imported from ContextCapture.

21) In the Upload section, click the "Start Now" button. You can monitor the upload using the progress bar in this section.

Open a Mapping Resource Reality Data in the Orbit Photo Navigation

Tags: Reality Data Web Viewer, Orbit 3DM Import & Upload Tool, Orbit Photo Navigation

Publish result of a ContextCapture aerotriangulation for the Orbit Photo Navigation

Pascal Cloutier — Tue, 04 May 2021 20:07:12 GMT

Revision 4 posted to ContextCapture | Descartes | Pointools | Orbit Wiki by Pascal Cloutier on 5/4/2021 8:07:12 PM

In ContextCapture Master or ContextCapture Center Master

1) Select a block resulting from Aerotriangulation.

2) Click the "Export" button and select the "Export to Orbit 3DM" option.

3) Set the "File Name" and "File Location" and ensure that the "Imagery" option is toggled ON.

4) Click the Export button.

In Orbit 3DM Import & Upload Tool

1) Navigate to the folder that contains the ContextCapture export. In the above example, this folder is: C:\Projects\Quarry\Quarry Imagery\MappingRun.

2) Drag-and-drop the .omr file found in this folder over the Orbit 3DM Import & Upload tool application's window.

3) The "Import and Process" section opens. Click "Start Now".

4) When the "Import & Process Run" message box opens, click OK.

5) Click the square button at the bottom-right of the "Import and Process" section to close it.

6) Click the "Optimize Imagery" option under "Aerial Mapping" in the Orbit 3DM Import & Upload tool application's lower-left corner.

7) Select the desired Quality and click the "Start Now" button.

8) When the "Optimize" message box opens, click OK.

9) Click the square button at the bottom-right of the "Optimize original images" section to close it.

10) Click the "Catalog" tab.

11) Select the "Aerial" radio button. The Mapping Resource will be listed.

12) Right-click on the Mapping Resouce and select the "Review Image Availability" option from the drop-down menu.

13) Right-click again on the Mapping Resouce and select the "Review Data for 3DM Viewer" option from the drop-down menu.

14) At this point, the indicator in the "3DMV" column should be green.

15) Click the "Extensions" button in the Orbit 3DM Import & Upload tool application's upper-right corner and select the "ContextShare Upload" option.

16) Click the "Connect" button.

17) Select the destination project in the "Search projects" drop-down.

18) In the "Action" section, select 'New".

19) In the "Resource" section, select "Catalog Resource".

20) In the "Local Resources" section, select the resource that corresponds to the Mapping Resource imported from ContextCapture.

21) In the Upload section, click the "Start Now" button. You can monitor the upload using the progress bar in this section.

Next step:

Open a Mapping Resource Reality Data in the Orbit Photo Navigation

Tags: Reality Data Web Viewer, Orbit 3DM Import & Upload Tool, Orbit Photo Navigation

Publish result of a ContextCapture aerotriangulation for the Orbit Photo Navigation

Pascal Cloutier — Tue, 04 May 2021 20:06:52 GMT

Revision 3 posted to ContextCapture | Descartes | Pointools | Orbit Wiki by Pascal Cloutier on 5/4/2021 8:06:52 PM

In ContextCapture Master or ContextCapture Center Master

1) Select a block resulting from Aerotriangulation.

2) Click the "Export" button and select the "Export to Orbit 3DM" option.

3) Set the "File Name" and "File Location" and ensure that the "Imagery" option is toggled ON.

4) Click the Export button.

In Orbit 3DM Import & Upload Tool

1) Navigate to the folder that contains the ContextCapture export. In the above example, this folder is: C:\Projects\Quarry\Quarry Imagery\MappingRun.

2) Drag-and-drop the .omr file found in this folder over the Orbit 3DM Import & Upload tool application's window.

3) The "Import and Process" section opens. Click "Start Now".

4) When the "Import & Process Run" message box opens, click OK.

5) Click the square button at the bottom-right of the "Import and Process" section to close it.

6) Click the "Optimize Imagery" option under "Aerial Mapping" in the Orbit 3DM Import & Upload tool application's lower-left corner.

7) Select the desired Quality and click the "Start Now" button.

8) When the "Optimize" message box opens, click OK.

9) Click the square button at the bottom-right of the "Optimize original images" section to close it.

10) Click the "Catalog" tab.

11) Select the "Aerial" radio button. The Mapping Resource will be listed.

12) Right-click on the Mapping Resouce and select the "Review Image Availability" option from the drop-down menu.

13) Right-click again on the Mapping Resouce and select the "Review Data for 3DM Viewer" option from the drop-down menu.

14) At this point, the indicator in the "3DMV" column should be green.

15) Click the "Extensions" button in the Orbit 3DM Import & Upload tool application's upper-right corner and select the "ContextShare Upload" option.

16) Click the "Connect" button.

17) Select the destination project in the "Search projects" drop-down.

18) In the "Action" section, select 'New".

19) In the "Resource" section, select "Catalog Resource".

20) In the "Local Resources" section, select the resource that corresponds to the Mapping Resource imported from ContextCapture.

21) In the Upload section, click the "Start Now" button. You can monitor the upload using the progress bar in this section.

Open a Mapping Resource Reality Data in the Orbit Photo Navigation

Tags: Reality Data Web Viewer, Orbit 3DM Import & Upload Tool, Orbit Photo Navigation

Publish result of a ContextCapture aerotriangulation for the Orbit Photo Navigation

Pascal Cloutier — Tue, 04 May 2021 20:02:52 GMT

Revision 2 posted to ContextCapture | Descartes | Pointools | Orbit Wiki by Pascal Cloutier on 5/4/2021 8:02:52 PM

ContextCapture Master or ContextCapture Center Master

1) Select a block resulting from Aerotriangulation.

2) Click the "Export" button and select the "Export to Orbit 3DM" option.

3) Set the "File Name" and "File Location" and ensure that the "Imagery" option is toggled ON.

4) Click the Export button.

Orbit 3DM Import & Upload Tool

1) Navigate to the folder that contains the ContextCapture export. In the above example, this folder is: C:\Projects\Quarry\Quarry Imagery\MappingRun.

2) Drag-and-drop the .omr file found in this folder over the Orbit 3DM Import & Upload tool application's window.

3) The "Import and Process" section opens. Click "Start Now".

4) When the "Import & Process Run" message box opens, click OK.

5) Click the square button at the bottom-right of the "Import and Process" section to close it.

6) Click the "Optimize Imagery" option under "Aerial Mapping" in the Orbit 3DM Import & Upload tool application's lower-left corner.

7) Select the desired Quality and click the "Start Now" button.

8) When the "Optimize" message box opens, click OK.

9) Click the square button at the bottom-right of the "Optimize original images" section to close it.

10) Click the "Catalog" tab.

11) Select the "Aerial" radio button. The Mapping Resource will be listed.

12) Right-click on the Mapping Resouce and select the "Review Image Availability" option from the drop-down menu.

13) Right-click again on the Mapping Resouce and select the "Review Data for 3DM Viewer" option from the drop-down menu.

14) At this point, the indicator in the "3DMV" column should be green.

15) Click the "Extensions" button in the Orbit 3DM Import & Upload tool application's upper-right corner and select the "ContextShare Upload" option.

16) Click the "Connect" button.

17) Select the destination project in the "Search projects" drop-down.

18) In the "Action" section, select 'New".

19) In the "Resource" section, select "Catalog Resource".

20) In the "Local Resources" section, select the resource that corresponds to the Mapping Resource imported from ContextCapture.

21) In the Upload section, click the "Start Now" button. You can monitor the upload using the progress bar in this section.

Tags: Reality Data Web Viewer, Orbit 3DM Import & Upload Tool, Orbit Photo Navigation

Publishing result of a ContextCapture aerotriangulation for the Orbit Photo Navigation

Pascal Cloutier — Tue, 04 May 2021 20:00:18 GMT

Revision 1 posted to ContextCapture | Descartes | Pointools | Orbit Wiki by Pascal Cloutier on 5/4/2021 8:00:18 PM

ContextCapture Master or ContextCapture Center Master

1) Select a block resulting from Aerotriangulation.

2) Click the "Export" button and select the "Export to Orbit 3DM" option.

3) Set the "File Name" and "File Location" and ensure that the "Imagery" option is toggled ON.

4) Click the Export button.

Orbit 3DM Import & Upload Tool

1) Navigate to the folder that contains the ContextCapture export. In the above example, this folder is: C:\Projects\Quarry\Quarry Imagery\MappingRun.

2) Drag-and-drop the .omr file found in this folder over the Orbit 3DM Import & Upload tool application's window.

3) The "Import and Process" section opens. Click "Start Now".

4) When the "Import & Process Run" message box opens, click OK.

5) Click the square button at the bottom-right of the "Import and Process" section to close it.

6) Click the "Optimize Imagery" option under "Aerial Mapping" in the Orbit 3DM Import & Upload tool application's lower-left corner.

7) Select the desired Quality and click the "Start Now" button.

8) When the "Optimize" message box opens, click OK.

9) Click the square button at the bottom-right of the "Optimize original images" section to close it.

10) Click the "Catalog" tab.

11) Select the "Aerial" radio button. The Mapping Resource will be listed.

12) Right-click on the Mapping Resouce and select the "Review Image Availability" option from the drop-down menu.

13) Right-click again on the Mapping Resouce and select the "Review Data for 3DM Viewer" option from the drop-down menu.

14) At this point, the indicator in the "3DMV" column should be green.

15) Click the "Extensions" button in the Orbit 3DM Import & Upload tool application's upper-right corner and select the "ContextShare Upload" option.

16) Click the "Connect" button.

17) Select the destination project in the "Search projects" drop-down.

18) In the "Action" section, select 'New".

19) In the "Resource" section, select "Catalog Resource".

20) In the "Local Resources" section, select the resource that corresponds to the Mapping Resource imported from ContextCapture.

21) In the Upload section, click the "Start Now" button. You can monitor the upload using the progress bar in this section.

Tags: Reality Data Web Viewer, Orbit 3DM Import & Upload Tool, Orbit Photo Navigation