User adding own dgnlib cuts out existing menu customisations?

Question

As a user entering a new workplace/workspace I am wanting to add my own dgnlib containing MenuBar customisations. I can do this by either using the Workspace>Customize menu and appending my dgnlib or manually entering it into the ucf file such that it has a line reading; 
 MS_DGNLIBLIST > C:/User/User.dgnlib 
 This works and I can see my new MenuBar customizations, but I then find that the existing company MenuBar customizations (Menus) have dissappeared. I would have thought that simply using append(or >) rather than the "=" operator would avoid this scenario but it doesn't so I must be missing something?

Carl Myhill · Accepted Answer

Thanks for posting the debug files, these show which *.cfg files are processed and the defined variables within each *.cfg, at the bottom there is a summary of what is set. Looking at your ' msdebug - Added dgnlib to ucf.txt ' it shows that its processing the user configuration file Processing macro file [C:\Users\DjukanovicJ\Documents\UstnV8i\PB-v8i.ucf with the following var as : MS_DGNLIBLIST=$(_USTN_USERINT)$(_USTN_USERINTNAME)\*.dgnlib;E:\Jovan\Microstation\Dgnlib\Jovan.dgnlib [C:\ProgramData\Bentley\MicroStation V8i (SELECTseries)\WorkSpace\interfaces\MicroStation\default\*.dgnlib;E:\Jovan\Microstation\Dgnlib\Jovan.dgnlib] In yet earlier you mentioned setting this in your ucf " MS_DGNLIBLIST > C:/User/User.dgnlib " are you sure you edited the correct UCF file or may be you was just using this as an example.? Assuming ' Jovan.dgnlib ' is your file containing your user customizations, open the user configuration file C:\Users\DjukanovicJ\Documents\UstnV8i\PB-v8i.ucf and place a '#' in front of the line starting with MS_DGNLIBLIST.................. so MicroStation no longer reads this line, then add the following line 
 MS_GUIDGNLIBLIST > E:\Jovan\Microstation\Dgnlib\Jovan.dgnlib Reopen MicroStation and see if this helps restore the interface as required. If you then require Text styles, levels etc then try adding the line 
 MS_DGNLIBLIST > E:\Jovan\Microstation\Dgnlib\Jovan.dgnlib